Exhibit G.pdf

236 KB Posted

Attached to
Screws
Solicitation number
SPMYM326Q5072
Issued by

About this file

Written by GovTribe AI ·

This document is a Contract Data Requirements List for the procurement of capscrews, specifying two mandatory data items that the contractor must submit.

Data Item G001 is a Certificate of Compliance certifying quality compliance, required under authority DI-MISC-81356A and contract reference Section C.2. This certification must be submitted one time with the material delivery to the requiring office (Code 245). Data Item G002 is a Certification Data/Report documenting chemical and mechanical certification, required under authority DI-MISC-80678 and contract reference Section C.3, also submitted one time with material. The G002 certification must contain actual test results for all chemical and mechanical testing required by specification, with quantitative results in specification-required units. For fasteners specifically, the certification must demonstrate testing of the correct number of specimens using new untested fasteners for wedge tensile and yield strength testing. Additionally, the certification must comply with the contract's "Marking and Certification requirements for Controlled Industrial Material" section. Both data items require submission under separate shipment numbers and reference clauses 252.232-7006, 252.232-7003, or 52.232-36 for payment and submission procedures. The contract line item number is 0012, and the contractor is identified by contract/PR number SPMYM326P5072. The document was prepared by Conrad Gagne.

View the file

Other files

File Type Posted
Combined Synopsis Solicitation 26Q5072.pdf PDF
RFQ 26Q5072.pdf PDF
Attachment 1.pdf PDF
Attachment 4.pdf PDF
Exhibit B.pdf PDF
Exhibit D.pdf PDF
Exhibit C.pdf PDF
Exhibit E.pdf PDF
Clauses - Full Text Provisions and Clauses.pdf PDF
Attachment 3.pdf PDF
Attachment 2.pdf PDF
Attachment 5.pdf PDF
Exhibit A.pdf PDF
Exhibit F.pdf PDF
Show all 14

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT DATA REQUIREMENTS LIST

(2 DATA ITEMS)

A. CONTRACT LINE ITEM NO. B. EXHIBIT

G

C. CATEGORY

TDP TM ______ OTHER______

D. SYSTEM/ITEM

CAPSCREW

E. CONTRACT/PR NO. F. CONTRACTOR

1. DATA ITEM NO.

G001

2. TITLE of DATA ITEM

CERTIFICATE OF COMPLIANCE

3. SUBTITLE

CERTIFICATION OF QUALITY

COMPLIANCE

4. AUTHORITY(DATA Item Description Number)

DI-MISC-81356A

5. CONTRACT REFERENCE

SECTION C. 2

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Technical content as described in the respective contract line item(s).

2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

0 0 0

15. TOTAL 0 1 0

1.DATA ITEM NO.

G002

2 TITLE of DATA ITEM

CERTIFICATION DATA / REPORT

3. SUBTITLE

CHEMICAL & MECHANICAL CERTIFICATION

4. AUTHORITY

DI-MISC-80678

5. CONTRACT REFERENCE

SECTION C. 3

6. REQUIRING OFFICE

CODE 245

7. DD 250 REQ

DD

9. DIST

STATEMENT

REQUIRED

A

10. FREQUENCY

One Time

12. DATE OF 1st

SUBMISSION

With Material

14. DISTRIBUTION

a. ADDRESSEE b. COPIES

DRAFT FINAL

8. APP. CODE

N/A

11. AS OF DATE

N/A

13. DATE OF

SUBSEQUENT

SUBMISSION

N/A

REG REPRO

133.2 0 1 0

16 REMARKS

1. Paragraphs 10.2.2, 10.2.3 & 10.4 of DI-MISC-80678 do not apply.

2. Technical content as described in the respective contract line item(s).

3. This certification shall contain the actual Test results of all Chemical

& Mechanical Test required by the Specification

4. The Test results shall be quantitative & in the units required by the specification.

5. For Payment & Submission of Data refer to Clauses 252.232-7006 &

252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.

6. Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.

7. In addition to the Certification Data requirements specified in DI-MISC- 80678, the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.

0 0 0

15. TOTAL 0 1 0

G. PREPARED BY H. DATE I. APPROVED BY 245.2

X

J. DATE

Conrad Gagne robert.dowdle Cross-Out

CONTRACT DATA REQUIREMENTS LIST 2 DATA ITEMS:
A CONTRACT LINE ITEM NO: 0012
B EXHIBIT A:
undefined:
undefined_2:
C CATEGORY TDP TM OTHER:
D SYSTEMITEM CAPSCREW:
E CONTRACTPR NO: SPMYM326P5072/SPMYM326P5072
F CONTRACTOR:
6 REQUIRING OFFICE CODE 245:
7 DD 250 REQ DD:
8 APP CODE NA:
REPRO:
9 DIST STATEMENT REQUIRED A:
14 DISTRIBUTION:
10 FREQUENCY One Time:
12 DATE OF 1st SUBMISSION With Material:
a ADDRESSEE:
b COPIES:
DRAFT:
FINAL:
0:
1:
0_2:
133216 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number:
133216 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_2:
016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number:
016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_2:
016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_3:
15 TOTAL:
0_3:
1_2:
0_4:
1DATA ITEM NO A002:
3 SUBTITLE CHEMICAL MECHANICAL CERTIFICATION:
4 AUTHORITY DIMISC80678:
6 REQUIRING OFFICE CODE 245_2:
7 DD 250 REQ DD_2:
8 APP CODE NA_2:
9 DIST STATEMENT REQUIRED A_2:
10 FREQUENCY One Time_2:
14 DISTRIBUTION_2:
a ADDRESSEE_2:
b COPIES_2:
FINAL_2:
DRAFT_2:
REPRO_2:
0_5:
1_3:
0_6:
133216 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply:
133216 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_2:
016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply:
016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_2:
016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_3:
15 TOTAL_2:
0_7:
1_4:
0_8:
G PREPARED BY:
H DATE:
J DATE:

File details come from the government source that posted it. Updated .