Attachment 5.pdf
PDF 36 KB Posted
- Attached to
- Screws
- Solicitation number
- SPMYM326Q5072
About this file
This document is a contract attachment specifying technical requirements for a socket head capscrew item. The contract SPMYM326Q5072 procures socket head capscrews identified by stock number 5305-LL-D00-0250 under Federal Supply Class (FSC) 5305. The specified product must conform to FF-S-86J Type VI standard with dimensions of 0.500-13UNC-3A X 6.500, manufactured from NICUAL material per QQ-N-286G specification, and annealed and age hardened. A critical processing note requires that NICUAL material subjected to heading or roll threading operations must be solution annealed before age hardening, and any threads formed after final age hardening must be cut or ground only. Earlier revisions of FF-S-86 are acceptable provided certifications or Certificates of Compliance (COC) document compliance with these material processing requirements.
The contractor must provide a Certificate of Compliance (CDRL DI-MISC-81356A) and Certification/Data Report (CDRL DI-MISC-80678) as referenced in Exhibit "A." Standard PNS clauses apply including Mercury Exclusion (C500), Marking & Certification Requirements (C524), and Restrictions on K-Monel Material (C531). Commercial packaging per standard commercial practice applies. Inspection and acceptance occurs at destination under PNS Standard FAR 52.246-1 Contractor Inspection Requirements with notice of constructive acceptance period provisions. The item is classified as non-Level-1 material, and special provisions for threaded products (Clause H500) apply.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2.pdf | ||
| Exhibit A.pdf | ||
| Exhibit F.pdf | ||
| Combined Synopsis Solicitation 26Q5072.pdf | ||
| RFQ 26Q5072.pdf | ||
| Attachment 1.pdf | ||
| Attachment 4.pdf | ||
| Exhibit B.pdf | ||
| Exhibit D.pdf | ||
| Exhibit C.pdf | ||
| Exhibit E.pdf | ||
| Clauses - Full Text Provisions and Clauses.pdf | ||
| Attachment 3.pdf | ||
| Exhibit G.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Page 1Contract_______________________
Attachment____________________
Section "B"
FSC 5305
Stock Number: 5305-LL-D00-0250
Item Name: SOCKET HEAD CAPSCREW
Section "C"
C.1: SOCKET HEAD CAP SCREW. FF-S-86J TY VI. 0.500-13UNC-3A X 6.500. NICUAL, QQ-N-286G, ANNEALED AND AGE HARDENED.
NOTE: Earlier revisions of FF-S-86 are acceptable as long as the certifications or COC document that
NICUAL material having been headed or roll threaded shall not be age hardened unless it has been solution annealed subsequent to the heading and threading operations. Threads formed after the final age hardening heat treatment shall be cut or ground only.
C.2 See Exhibit "A" Seq A001: CDRL DI-MISC-81356A (Certificate of Compliance).
C.3 See Exhibit "A" Seq. A002: CDRL DI-MISC-80678 (Certification / Data Report).
C.4 PNS Standard Clauses C500 (Mercury Exclusion), C524 (Marking & Certification Requirements) &
C531 (Restrictions on K-Monel Material) Apply.
Section "D"
D2.2 STANDARD COMMERCIAL PRACTICE (COMMERCIAL PACKAGING) APPLIES.
Section "E"
PNS STANDARD FAR 52.246-1 CLAUSE (CONTRACTOR INSPECTION REQUIREMENTS),
E-2 (INSPECTION & ACCEPTANCE - DESTINATION) & E504 (NOTICE OF CONSTRUCTIVE
ACCEPTANCE PERIOD) APPLY.
Section "G"
NON LEVEL-1 MAT'L
Section "H"
STANDARD CLAUSE H500 (SPECIAL PROVISIONS FOR THREADED PRODUCTS) APPLIES.
steven.w.harmon Cross-Out
| Contract: SPMYM326Q5072 |
| Attachment: 5 |
File details come from the government source that posted it. Updated .