Exhibit A.pdf
PDF 372 KB Posted
- Attached to
- Screws
- Solicitation number
- SPMYM326Q5072
About this file
This is a Contract Data Requirements List (CDRL) for cap screws under contract SPMYM326P5072, prepared on DD Form 1423 (mechanized equivalent) per Defense Acquisition Regulation (DAR) Clause 16-815.
The document specifies two data submission requirements for Item No. 0002 (cap screws). Sequence A001 requires a Certificate of Compliance (DI-MISC-81356A) referencing contract paragraph C.4.1, submitted one time with material delivery. The certification must document technical content as described in the respective contract line item(s) and be submitted under separate shipment numbers. Submission relates to clauses 252.232-7006 and 252.232-7003 or FAR 52.232-36, with three total copies distributed to location 133.2. Sequence A002 requires Material Certification (DI-MISC-80678) per contract paragraph C.4.2, also submitted one time. This certification must include actual test results for all chemical and mechanical tests specified in the applicable specification, with quantitative results expressed in specification-required units. Notably, paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 do not apply. The certification must also comply with marking and certification requirements for controlled industrial material. For wedge tensile testing and yield strength testing, new untested fasteners are required for each test, with documentation showing correct specimen testing. Three copies of this certification are required, distributed to location 133.2, also submitted under separate shipment numbers per the referenced payment and submission clauses. Technical office responsibility is assigned to 136.2.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit C.pdf | ||
| Exhibit E.pdf | ||
| Clauses - Full Text Provisions and Clauses.pdf | ||
| Combined Synopsis Solicitation 26Q5072.pdf | ||
| RFQ 26Q5072.pdf | ||
| Attachment 1.pdf | ||
| Attachment 4.pdf | ||
| Exhibit B.pdf | ||
| Exhibit D.pdf | ||
| Attachment 3.pdf | ||
| Exhibit G.pdf | ||
| Attachment 2.pdf | ||
| Attachment 5.pdf | ||
| Exhibit F.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
5305 1FA EXHIBIT A
SYSTEM/ITEM SCREW, CAP
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 11/02/2022
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A001
02 DATA DESC CERTIFICATION DATA/REPORTS
03 SUBTITLE CERT. OF COMPLIANCE
04 DID NUMBER DI-MISC-81356A
05 CONTRACT REF PARA. C.4.1
06 TECH OFFICE 136.2
07 DD 250 REQ DD
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM WITH MATERIAL
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 3
16 REMARKS 1.TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
2.FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
SEQ. NO. A001
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
/2 0
SPMYM326P5072/
SPMYM326P5072 1/3
5305 1FA EXHIBIT
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 11/02/2022
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A002
02 DATA DESC MATERIAL CERTIFICATION
03 SUBTITLE CERTIFICATION/DATA REPORT
04 DID NUMBER DI-MISC-80678
05 CONTRACT REF PARA C.4.2
06 TECH OFFICE 136.2
07 DD 250 REQ
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 3
16 REMARKS BLOCK 4 1.)PARAGRAPHS 10.2.2, 10.2.3 & 10.4 OF DI-MISC-80678 DO NOT APPLY.
2.)TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
3.)THIS CERTIFICATION SHALL CONTAIN THE ACTUAL TEST RESULTS OF ALL CHEMICAL
& MECHANICAL TEST(S) REQUIRED BY THE SPECIFICATION
4.)THE TEST RESULT(S) SHALL BE QUANTITATIVE & IN THE UNITS REQUIRED BY THE
SPECIFICATION.
5.)FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
6.)IN ADDITION TO THE CERTIFICATION DATA REQUIREMENTS SPECIFIED IN DI-MISC-
80678, THE REQUIREMENTS OF THE CONTRACT SECTION TITLED, “MARKING AND
CERTIFICATION REQUIREMENTS FOR CONTROLLED INDUSTRIAL MATERIAL” APPLY.
7.)FASTENER CERTIFICATION SHALL SHOW EVIDENCE OF TESTING OF THE CORRECT
NUMBER OF SPECIMENS, NEW UNTESTED FASTENERS ARE REQUIRED FOR EACH
TEST WHERE WEDGE TENSILE TESTING AND YIELD STRENGTH TESTING ARE
REQUIRED.
SEQ. NO. A002
PREPARED BY DATE
09 IAC INPUT
/1
2/3
SPMYM326P5072/
SPMYM326P5072
5305 1FA EXHIBIT
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 11/02/2022
CONTRACT DATA REQUIREMENTS LIST
APPROVED BY DATE
DD FORM 1423
SPMYM326P5072/
SPMYM326P5072 3/3
File details come from the government source that posted it. Updated .