Exhibit E.pdf

134 KB Posted

Attached to
Screws
Solicitation number
SPMYM326Q5072
Issued by

About this file

Written by GovTribe AI ·

This document is a Contract Data Requirements List (CDRL) specifying two data items required for contract line items related to fasteners (CAPSCREW system/item 0010).

Data Item E001 - Certificate of Compliance requires submission of a Certificate of Quality Compliance as a one-time delivery with material. The technical content must describe the respective contract line items and comply with DI-MISC-81356A standards. Submission should reference Section C.2, Code 245, and be delivered to address 133.2. Each data item must be submitted under a separate shipment number, with payment and submission procedures referenced in Clauses 252.232-7006, 252.232-7003, or 52.232-36.

Data Item E002 - Certification Data/Report requires submission of Chemical & Mechanical Certification, also as a one-time delivery with material. Per DI-MISC-82386 (Section C.3, Code 245), the certification must contain actual test results of all chemical and mechanical tests required by the specification in quantitative units. For fastener certification, the submission must demonstrate testing of the correct number of specimens, with new untested fasteners required for each test where wedge tensile testing and yield strength testing are required. Additional requirements apply regarding marking and certification for controlled industrial material. Paragraphs 6 & 8 of DI-MISC-82386 do not apply. Like Data Item E001, submission follows the same payment and shipment number procedures, with delivery to address 133.2.

View the file

Other files

File Type Posted
Exhibit C.pdf PDF
Clauses - Full Text Provisions and Clauses.pdf PDF
Combined Synopsis Solicitation 26Q5072.pdf PDF
RFQ 26Q5072.pdf PDF
Attachment 1.pdf PDF
Attachment 4.pdf PDF
Exhibit B.pdf PDF
Exhibit D.pdf PDF
Attachment 3.pdf PDF
Exhibit G.pdf PDF
Attachment 2.pdf PDF
Attachment 5.pdf PDF
Exhibit A.pdf PDF
Exhibit F.pdf PDF
Show all 14

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

CONTRACT DATA REQUIREMENTS LIST 2 DATA ITEMS:

A CONTRACT LINE ITEM NO:
B EXHIBIT A:
undefined:
undefined_2:
C CATEGORY TDP TM OTHER:
D SYSTEMITEM CAPSCREW:
E CONTRACTPR NO:
F CONTRACTOR:
6 REQUIRING OFFICE CODE 245:
7 DD 250 REQ DD:
8 APP CODE NA:
REPRO:
9 DIST STATEMENT REQUIRED A:
14 DISTRIBUTION:
10 FREQUENCY One Time:
12 DATE OF 1st SUBMISSION With Material:
a ADDRESSEE:
b COPIES:
DRAFT:
FINAL:
0:
1:
0_2:
133216 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number:
133216 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_2:
016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number:
016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_2:
016 REMARKS 1 Technical content as described in the respective contract line items 2 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number_3:
15 TOTAL:
0_3:
1_2:
0_4:
1DATA ITEM NO A002:
3 SUBTITLE CHEMICAL MECHANICAL CERTIFICATION:
4 AUTHORITY DIMISC80678:
6 REQUIRING OFFICE CODE 245_2:
7 DD 250 REQ DD_2:
8 APP CODE NA_2:
9 DIST STATEMENT REQUIRED A_2:
10 FREQUENCY One Time_2:
14 DISTRIBUTION_2:
a ADDRESSEE_2:
b COPIES_2:
FINAL_2:
DRAFT_2:
REPRO_2:
0_5:
1_3:
0_6:
133216 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply:
133216 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_2:
016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply:
016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_2:
016 REMARKS 1 Paragraphs 1022 1023 104 of DIMISC80678 do not apply 2 Technical content as described in the respective contract line items 3 This certification shall contain the actual Test results of all Chemical Mechanical Test required by the Specification 4 The Test results shall be quantitative in the units required by the specification 5 For Payment Submission of Data refer to Clauses 2522327006 2522327003 or 5223236 Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number 6 Fastener certification shall show evidence of testing of the correct number of specimens new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required 7 In addition to the Certification Data requirements specified in DIMISC 80678 the requirements of the contract section titled Marking and Certification requirements for Controlled Industrial Material apply_3:
15 TOTAL_2:
0_7:
1_4:
0_8:
G PREPARED BY:
H DATE:
J DATE:

File details come from the government source that posted it. Updated .