Exhibit D.pdf
PDF 89 KB Posted
- Attached to
- Screws
- Solicitation number
- SPMYM326Q5072
About this file
This is a Contract Data Requirements List (DD Form 1423) for cap screws (item number 0004-0006-0008) under contract SPMYM326P5072. The document outlines two data submission requirements from the contractor.
The first requirement (Sequence A001) mandates submission of Certification Data/Reports demonstrating Certificate of Compliance per DID DI-MISC-81356A, referenced in contract paragraph C.4.1. This certification must be submitted with the material delivery on a one-time basis to technical office 136.2. The second requirement (Sequence A002) requires Material Certification per DID DI-MISC-80678, also referenced in paragraph C.4.2, submitted one-time to the same technical office. The Material Certification must contain actual test results for all chemical and mechanical tests required by specification, presented as quantitative data in specification-required units. Notably, paragraphs 10.2.2, 10.2.3, and 10.4 of DI-MISC-80678 do not apply. Fastener certification must demonstrate testing of the correct number of specimens using new, untested fasteners for each test where wedge tensile testing and yield strength testing are required. All data items must be submitted under separate shipment numbers, with payment and submission governed by FAR clauses 252.232-7006, 252.232-7003, or 52.232-36. Additional marking and certification requirements for controlled industrial material specified in the contract section apply to both submissions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Exhibit C.pdf | ||
| Exhibit E.pdf | ||
| Clauses - Full Text Provisions and Clauses.pdf | ||
| Combined Synopsis Solicitation 26Q5072.pdf | ||
| RFQ 26Q5072.pdf | ||
| Attachment 1.pdf | ||
| Attachment 4.pdf | ||
| Exhibit B.pdf | ||
| Attachment 3.pdf | ||
| Exhibit G.pdf | ||
| Attachment 2.pdf | ||
| Attachment 5.pdf | ||
| Exhibit A.pdf | ||
| Exhibit F.pdf |
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
5305 1FA EXHIBIT
SYSTEM/ITEM SCREW, CAP
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 06/28/2021
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A002
02 DATA DESC MATERIAL CERTIFICATION
03 SUBTITLE CERTIFICATION/DATA REPORT
04 DID NUMBER DI-MISC-80678
05 CONTRACT REF PARA C.4.2
06 TECH OFFICE 136.2
07 DD 250 REQ
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 3
16 REMARKS BLOCK 4 1.)PARAGRAPHS 10.2.2, 10.2.3 & 10.4 OF DI-MISC-80678 DO NOT APPLY.
2.)TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
3.)THIS CERTIFICATION SHALL CONTAIN THE ACTUAL TEST RESULTS OF ALL CHEMICAL
& MECHANICAL TEST(S) REQUIRED BY THE SPECIFICATION
4.)THE TEST RESULT(S) SHALL BE QUANTITATIVE & IN THE UNITS REQUIRED BY THE
SPECIFICATION.
5.)FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
6.)IN ADDITION TO THE CERTIFICATION DATA REQUIREMENTS SPECIFIED IN DI-MISC-
80678, THE REQUIREMENTS OF THE CONTRACT SECTION TITLED, “MARKING AND
CERTIFICATION REQUIREMENTS FOR CONTROLLED INDUSTRIAL MATERIAL” APPLY.
7.)FASTENER CERTIFICATION SHALL SHOW EVIDENCE OF TESTING OF THE CORRECT
NUMBER OF SPECIMENS, NEW UNTESTED FASTENERS ARE REQUIRED FOR EACH
TEST WHERE WEDGE TENSILE TESTING AND YIELD STRENGTH TESTING ARE
REQUIRED.
SEQ. NO. A002
PREPARED BY DATE
09 IAC INPUT
/1
0004-0006-0008
5305 1FA EXHIBIT
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 06/28/2021
CONTRACT DATA REQUIREMENTS LIST
APPROVED BY DATE
DD FORM 1423
SPMYM326P5072/SPMYM326P5072
2/3
5305 1FA EXHIBIT A
ITEM NO
CATEGORY
CONTRACTOR
CONTRACT
PAGE
(ADP DD FORM 1423(MECHANIZED EQUIVALENT) PER DAR CLAUSE 16-815)
PRINTED 06/28/2021
CONTRACT DATA REQUIREMENTS LIST
01 SEQ NO A001
02 DATA DESC CERTIFICATION DATA/REPORTS
03 SUBTITLE CERT. OF COMPLIANCE
04 DID NUMBER DI-MISC-81356A
05 CONTRACT REF PARA. C.4.1
06 TECH OFFICE 136.2
07 DD 250 REQ DD
08 APP CODE
10 FREQUENCY 1-TIME
11 AS OF DATE
12 DATE 1ST SUBM WITH MATERIAL
13 DATE SUB SUBM
14 DISTRIBUTION 133.2
15 TOTAL 3
16 REMARKS 1.TECHNICAL CONTENT AS DESCRIBED IN THE RESPECTIVE CONTRACT LINE ITEM(S).
2.FOR PAYMENT & SUBMISSION OF DATA REFER TO CLAUSES 252.232-7006 & 252.232-
7003 OR 52.232-36. EACH DATA ITEM SUBMITTED BY VENDOR MUST BE SUBMITTED
UNDER A SEPARATE SHIPMENT NUMBER.
SEQ. NO. A001
PREPARED BY
APPROVED BY
DATE
DATE
DD FORM 1423
09 IAC INPUT
/2 0
SPMYM326P5072/SPMYM326P5072
3/3
| CONTRACT: SPMYM326P5072/SPMYM326P5072 |
| PAGE: 1/3 |
| CONTRACT_2: |
| PAGE_2: |
| CONTRACT_3: |
| PAGE_3: |
File details come from the government source that posted it. Updated .