Exhibit A SOW_MAB Bldg_412_Install_pads_and_bollards.pdf
PDF 218 KB Posted
- Attached to
- MAB Building 412 Concrete Work
- Solicitation number
- ISD_361749_DA
About this file
This document is a Statement of Work (SOW) for the installation of two concrete pads to support HVAC systems at Building 412 at the Fermi National Accelerator Laboratory (Fermilab) located in Batavia, Illinois. The SOW outlines the scope of work, which includes mobilization, providing all materials and labor to install the concrete pads, installing new replacement bollards and sleeves, and final clean-up and demobilization. The estimated schedule for the project is from October 31, 2024 to December 31, 2024.
The related federal contract opportunity is a solicitation for the MAB Building 412 Concrete Work project. Fermilab is requesting proposals for the installation of the two concrete pads and related work. Proposals are due on Monday, December 16, 2024 at 5pm CT. The project is located on the Fermilab site in DuPage County, Illinois. The Subcontractor shall provide all required supervision, labor, materials, tools, and equipment necessary to perform the work as described in the SOW and technical specifications.
View the file
Other files
Show all 26
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SOW TEMPLATE 04.24.2023
SOW DATE: 6/7/2024
PROJECT TITLE: Concrete work for The New HVAC Pads and Bollards for the replacement of EOL units. ID165368 Fims 412 FRA POINT OF CONTACT: Joseph M. Perona x4772 41904N COUNTY THAT WORK WILL BE COMPLETED IN: DuPage☒ Project and task 60-60.03.14.16.02-ISD-412
INTRODUCTION:
This project intends to obtain a qualified Subcontractor to perform installation of two concrete pads to support HVAC systems at Building 412 at Fermi National Accelerator Laboratory (Fermilab) located in Batavia, Illinois. Fermilab is operated by the Fermi Research Alliance (FRA). FRA will provide a Task Manager / Construction Coordinator (TM/CC) to provide oversight of the project.
The purpose of this statement of work (SOW) is to obtain the supervision, expertise, labor, materials, and equipment in relation to the work indicated below.
SCOPE OF WORK
1) Mobilize to MAB building 412.
2) Contractor to provide all materials needed, to install two concrete pads in separate locations. (Concrete details)
i) The contractors are to abide by FESHM Chapter 4195 Silica Hazards. (Attachment)
b) The front of the building (pic 1 Front of building)
i) The contractor is to provide framework and place rebar as needed.
ii) Installation of concrete pad. Dimensions, 22’X23’. (Pic 3 Contractor supplied drawing)
iii) The contractor is to make any final cuts or preparation for concrete pad.
iv) The contractor is to supply all material including black top or concrete to finish area.
c) The rear of building (pic 2 rear of building)
i) The contractor is to provide framework and place rebar as needed.
ii) Installation of concrete pad. Dimensions, 22’X23’ (Gravel drive) (Pic 3 Contractor supplied drawing)
3) Contractor to provide materials to install new replacement bollards and sleaves.
a) The front of building.
i) Provide and installation of 8 Bollards with plastic sleaves.
b) The rear of building
i) Provide and installation of 4 bollard with plastic sleaves.
4) Final clean up and inspections.
5) Demobilize.
GOVERNMENT FURNISHED PROPERTY
N/A
PLACE OF PERFORMANCE
Fermi National Accelerator Laboratory MAB, 412, Batavia, IL 60510.
ESTIMATED SCHEDULE/PERIOD OF PERFORMANCE
EST START DATE: 10/31/2024 EST END DATE: 12/31/2024
Statement of Work Infrastructure Services Division
File details come from the government source that posted it. Updated .