Exh E H-1 TDM Lot 8 Tech Pubs CDRLs DRAFT.docx

DOCX document 651 KB Posted Apr 29, 2022

Attached to: DRAFT RFP for H-1 Training Device Modernization Program Procurement, Upgrades to AH-1Z and UH-1Y Flight Training Devices
Solicitation number: N6134022R0030
Issued by: Department of the Navy Naval Air Systems Command

View the file

Other files

File	Type	Posted
Exh C H-1 TDM Lot 8 ENG_ADMIN CDRLS DRAFT.docx	DOCX document	Apr 29, 2022
Exh A H-1 TDM Lot 7 ENG_ADMIN CDRLS DRAFT.docx	DOCX document	Apr 29, 2022
Att 2 H-1 TDM Lot 7 and 8 PRF DRAFT.docx	DOCX document	Apr 29, 2022
H-1 Lot VII_VIII Draft RFP 4.29.pdf	PDF	Apr 29, 2022
Exh D H-1 TDM Lot 8 Logistics CDRLs DRAFT.docx	DOCX document	Apr 29, 2022
Attachment 4 DIT Form.pdf	PDF	Apr 29, 2022
Att 1 H-1 TDM Lot 7 and 8 SOW DRAFT_4.11.docx	DOCX document	Apr 29, 2022
Exh B H-1 TDM Lot 7 Logistic CDRLs DRAFT.docx	DOCX document	Apr 29, 2022

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

C O N T R A C T D A T A R E Q U I R E M E N T S L I S T (1 Data Item) Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

C. CATEGORY:

E Lot 1

TDP _____ TM _ X___ OTHER ___

D. SYSTEM/ITEM

E. CONTRACT/PR NO.

F. CONTRACTOR

LOT VIII AH-1Z Device 2F197-1

CAMP PENDLETON

1. DATA ITEM NO.

2. TITLE OF DATA ITEM

3. SUBTITLE

17. PRICE GROUP

E001

REVISIONS TO EXISTING DOCUMENTS

COMMERCIAL OFF THE SHELF MANUALS (COTS)

4. AUTHORITY (Data Acquisition Document No.)

5. CONTRACT REFERENCE

6. REQUIRING OFFICE

18. ESTIMATED

TOTAL PRICE

TMCR 17-18

SOW PARA: 3.2.9.6

PMA-276

7. DD 250 REQ

9. DIST STATEMENT

10. FREQUENCY

12. DATE OF FIRST SUBMISSION

14. DISTRIBUTION

2 TIMES

SEE BLK 16

8. APP CODE

11. AS OF DATE

13. DATE OF SUBSEQUENT SUBM.

a. ADDRESSEE

b. COPIES

Final

N/A

SEE BLK 16

Draft

Reg

Repro

16. REMARKS

1. BLK 8: THE GOVERNMENT WILL HAVE 21 BUSINESS DAYS FOR REVIEW AND ACCEPT, ACCEPT WITH COMMENTS, OR REJECT FOR EACH SUBMISSION. REVIEWING ACTIVITY IS THE NAWCTSD TMSS.

THE CONTRACTOR SHALL HAVE 20 BUSINESS DAYS TO CORRECT AND RESUBMIT REJECTED MATERIALS.

2. BLK 9: REFER TO TMCR 17-18, SECTION 4.6 FOR DISTRIBUTION STATEMENT AND OTHER MARKINGS.

DISTRIBUTION STATEMENT D- DISTRIBUTION AUTHORIZED TO DOD AND U.S. DOD CONTRACTORS ONLY. ADMINISTRATIVE OR OPERATIONAL 01 JANUARY 2021. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO PEO(CS)/PMA-205, 47123 BUSE ROAD, RADM WILLIAM A. MOFFETT BUILDING, PATUXENT RIVER, MARYLAND 20670-1547.

3. BLK 12: THE FIRST SUBMISSION SHALL BE DELIVERED FOR REVIEW CONCURRENT WITH THE FIRST TD IPR.

4. BLK 13: THE FINAL SUBMISSION SHALL BE DELIVERED FOR REVIEW CONCURRENT WITH THE FINAL PHYSICAL CONFIGURATION AUDIT (FPCA).

5. BLK 14: DELIVERY SHALL BE IN ACCORDANCE WITH TMCR 17-18. THE COMPLETED FINAL REVISION REPODUCIBLE COPY SHALL BE DELIVERED ON CD/DVD-ROM.

DELIVERY TO THE NAWCTSD PCO, ILSM, AND IPTL SHALL BE LETTER NOTIFICATIONS.

NAWCTSD PCO

SEE BLK 16

NAWCTSD TMSS

NAWCTSD ISEO

NAWCTSD DAPML

NAWCTSD IPTL

SEE BLK 16

SITE COR

15. TOTAL

G. PREPARED BY

H. DATE

I. APPROVED BY

J. DATE

LAQUISHA THOMAS, TMSS

15 MARCH 2022

S. COLN, PMA205, DAPMTS

15 MARCH 2022

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 1 of 63 Pages

C O N T R A C T D A T A R E Q U I R E M E N T S L I S T

Form Approved

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

C. CATEGORY:

E Lot 2

TDP _____ TM _X ___ OTHER _ ______________________

D. SYSTEM/ITEM

E. CONTRACT/PR NO.

F. CONTRACTOR

LOT VIII AH-1Z Device 2F197-1

1. DATA ITEM NO.

2. TITLE OF DATA ITEM

3. SUBTITLE

17. PRICE GROUP

L001

REVISIONS TO EXISTING GOVERNMENT DOCUMENTS

OPERATION AND MAINTENANCE (O&M) MANUAL

4. AUTHORITY (Data Acquisition Document No.)

5. CONTRACT REFERENCE

6. REQUIRING OFFICE

18. ESTIMATED

TOTAL PRICE

TMCR 17-18

SOW PARA: 3.2.9.6

PMA-276

7. DD 250 REQ

9. DIST STATEMENT

10. FREQUENCY

12. DATE OF FIRST SUBMISSION

14. DISTRIBUTION

3 TIMES

SEE BLK 16

8. APP CODE

11. AS OF DATE

13. DATE OF SUBSEQUENT SUBM.

a. ADDRESSEE

b. COPIES

Final

N/A

SEE BLK 16

Draft

Reg

Repro

1. BLK 8: THE GOVERNMENT WILL HAVE 21 BUSINESS DAYS FOR REVIEW AND ACCEPT, ACCEPT WITH COMMENTS, OR REJECT FOR EACH SUBMISSION. REVIEWING ACTIVITY IS THE NAWCTSD TMSS.

THE CONTRACTOR SHALL HAVE 20 BUSINESS DAYS TO CORRECT AND RESUBMIT REJECTED MATERIALS.

2. BLK 9: REFER TO TMCR 17-18, SECTION 4.6 FOR DISTRIBUTION STATEMENT AND OTHER MARKINGS.

3. BLK 12: FIRST DRAFT SUBMISSION SHALL BE DUE 10 BUSINESS DAYS PRIOR TO THE FIRST TD IPR AND SHALL MEET THE REQUIREMENTS OF THE SPECIFIC CONFERENCE AS STATED IN THE SOW.

4. BLK 13: SECOND SUBMISSION SHALL BE DUE AT FINAL PHYSICAL CONFIGURATION AUDIT (FPCA) AND SHALL INCLUDE A COMPLETE DRAFT HARD COPY.

5. THE FINAL SUBMISSION SHALL BE DUE FOR REVIEW CONCURRENT WITH THE INTEGRATED LOGISTICS SUPPORT VERIFICATION (ILSV).

6. BLK 14: DELIVERY SHALL BE IN ACCORDANCE WITH TMCR 17-18. THE COMPLETED FINAL REVISION REPODUCIBLE COPY SHALL BE DELIVERED ON CD/DVD-ROM.

DELIVERY TO THE NAWCTSD PCO, ILSM, AND IPTL SHALL BE LETTER NOTIFICATIONS.

NAWCTSD PCO

SEE BLK 16

NAWCTSD TMSS

NAWCTSD ISEO

NAWCTSD DAPML

NAWCTSD IPTL

SEE BLK 16

SITE COR

15. TOTAL

G. PREPARED BY

H. DATE

I. APPROVED BY

J. DATE

LAQUISHA THOMAS, TMSS

15 MARCH 2022

S. COLN, PMA205, DAPMTS

15 MARCH 2022

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 2 of 63 Pages

C O N T R A C T D A T A R E Q U I R E M E N T S L I S T (1 Data Item) Form Approved

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

C. CATEGORY:

E Lot 3

TDP __X___ TM _ ___ OTHER _ SESS______________________

D. SYSTEM/ITEM

E. CONTRACT/PR NO.

F. CONTRACTOR

LOT VIII AH-1Z Device 2F197-1

1. DATA ITEM NO.

2. TITLE OF DATA ITEM

3. SUBTITLE

17. PRICE GROUP

S001

REVISIONS TO EXISTING DOCUMENTS

PRODUCT ENGINEERING DRAWING DESIGN AND ASSOCIATED LISTS (PEDDAL)

4. AUTHORITY (Data Acquisition Document No.)

5. CONTRACT REFERENCE

6. REQUIRING OFFICE

18. ESTIMATED

TOTAL PRICE

DI-SESS-81000F

SOW PARA: 3.2.9.6:

PMA-276

7. DD 250 REQ

9. DIST STATEMENT

10. FREQUENCY

12. DATE OF FIRST SUBMISSION

14. DISTRIBUTION

3 TIMES

SEE BLK 16

8. APP CODE

11. AS OF DATE

13. DATE OF SUBSEQUENT SUBM.

a. ADDRESSEE

b. COPIES

Final

N/A

SEE BLK 16

Draft

Reg

Repro

16. REMARKS

1. BLK 8: THE GOVERNMENT WILL HAVE 21 BUSINESS DAYS FOR REVIEW AND ACCEPT, ACCEPT WITH COMMENTS, OR REJECT FOR EACH SUBMISSION. REVIEWING ACTIVITY IS THE NAWCTSD TMSS.

THE CONTRACTOR SHALL HAVE 20 BUSINESS DAYS TO CORRECT AND RESUBMIT REJECTED MATERIALS.

WARNING! THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC 2751, ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979 (TITLE 50, U.S.C., APP. 2401 ET SEQ.), AS AMENDED. VIOLATION OF THESE LAWS IS SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN ACCORDANCE WITH PROVISIONS OF DOD DIRECTIVE 5230.25.

2. BLK 12: FIRST DRAFT SUBMISSION SHALL BE DUE 10 BUSINESS DAYS PRIOR TO THE FIRST TD IPR AND SHALL MEET THE REQUIREMENTS OF THE SPECIFIC CONFERENCE AS STATED IN THE SOW.

3. BLK 13: SECOND SUBMISSION SHALL BE DUE AT FINAL PHYSICAL CONFIGURATION AUDIT (FPCA) AND SHALL INCLUDE A COMPLETE DRAFT HARD COPY.

4. THE FINAL SUBMISSION SHALL BE DUE FOR REVIEW CONCURRENT WITH THE INTEGRATED LOGISTICS SUPPORT VERIFICATION (ILSV).

5. BLK 14: DELIVERY SHALL BE SOURCE DOCUMENT IN AUTOCAD 2021 OR LATER, AND PDF.

DELIVERY TO THE NAWCTSD PCO, AND IPTL SHALL BE LETTER NOTIFICATIONS.

NAWCTSD PCO

SEE BLK 16

NAWCTSD TMSS

NAWCTSD ISEO

NAWCTSD DAPML

NAWCTSD IPTL

SEE BLK 16

SITE COR

15. TOTAL

G. PREPARED BY

H. DATE

I. APPROVED BY

J. DATE

LAQUISHA THOMAS, TMSS

15 MARCH 2022

S. COLN, PMA205, DAPMTS

15 MARCH 2022

DD FORM 1423-1, FEB 2001 PREVIOUS EDITION MAY BE USED Page 3 of 63 Pages

TDP OPTION SELECTION WORKSHEET

SYSTEM: Lot VIII Trainers

DATE PREPARED: 15 MARCH 2022

A: CONTRACT NO.

B. EXHIBIT/ATTACHMENT NO.

C. CLIN

D. CDRL DATA ITEM NO.

S001 PEDDAL

1. TDP LEVEL (CHOOSE ONLY ONE PER WORKSHEET). Note: The level selected must coincide with the requirements of the elements selected in block 5.

A. ☐ CONCEPTUAL LEVEL
B.	REMARKS:

Drawing package will be a Maintenance Drawing package only. No detail part drawings and fabrication drawings required unless modifying a COTS component.

☐ DEVELOPMENTAL LEVEL

☒ PRODUCT LEVEL

2. TYPE AND FORMAT (X all that apply and complete as applicable.)

A. ☐ TYPE 2D: 2D DRAWINGS(describe in detail in remarks below or in block 11):

☒NATIVE 2D CAD (SPECIFY TYPE): DWG Auto Cad 2021 or later

☒ISO 32000 PDF

☐HARD COPY

☐OTHER FORMAT (SPECIFY TYPE): _________________

REMARKS :

B. ☐TYPE 3D: 3D MODEL BASED (describe in detail in remarks below or in block 11)

☐NATIVE 3D CAD (SPECIFY TYPE): _________________

☐3Di VIEWABLE* FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.):

☐NEUTRAL FORMAT DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. STEP AP203, AP 214 etc.):

☐2D DRAWINGS DERIVED FROM 3D NATIVE MODELS (Specify type, i.e. ISO 32000 PDF etc.):

☐OTHER FORMAT (SPECIFY TYPE): _________________

*NOTE: 3Di viewable will be in ISO 32000 pdf format unless otherwise specified.

REMARKS :

3. CAGE CODE AND DOCUMENT NUMBERS

A. ☒CONTRACTOR CAGE & DOCUMENT NUMBERS

☐GOVERNMENT CAGE & DOCUMENT NO. (COMPLETE 3B, 3C, AND 3D)

B. USE CAGE CODE:

C. USE DOCUMENT NUMBERS:

D. TO BE ASSIGNED BY:

4. DRAWING FORMATS AND/OR 3Di PDF FORMAT (X one and complete as applicable)

☒CONTRACTOR FORMAT GOVERNMENT FORMAT

REMARKS: IAW ASME Y14.100 and Y14.1

5. TDP ELEMENTS REQUIRED (X all that apply )

☐ELEMENTS REQUIRED TO BE DETERMINED BY CONTRACTOR

OR THE FOLLOWING ARE REQUIRED:

☒MAINTENANCE DRAWING PACKAGE

6. APPLICABILITY OF STANDARDS. The following Standards apply: (X as applicable)

	☒	ASME Y14.100 ENGINEERING DRAWING PRACTICES WITH APPENDICES:
☒B	☒C	☒D	☒E

Company Stds permitted? ☒ No

	☒	ASME Y14.24 TYPES AND APPLICATIONS OF ENGINEERING DRAWINGS
☒	ASME Y14.34 ASSOCIATED LISTS
☒	ASME Y14.35 REVISION OF ENGINEERING DRAWINGS AND ASSOCIATED DOCUMENTS
☒	ASME Y14.41 DIGITAL PRODUCT DEFINITION DATA PRACTICES
☒	ASME Y14.5 DIMENSIONING AND TOLERANCING
		OTHER STANDARDS APPLY AS DIRECTED

Page 4 of 63 Pages

7. ASSOCIATED LISTS (X all that apply and complete as applicable.)

A. ☒ PARTS LISTS (X ONE)*

(1) ☐ INTEGRAL

(2) ☐SEPARATE

(3) ☒CONTRACTOR SELECT

B. ☐DATA LISTS

☐REQUIRED (Specify Levels of ASSY):

C. ☐INDEX LISTS

☐REQUIRED (Specify Levels of ASSY):

D. ☒WIRING LISTS

(1) ☐INTEGRAL

(2) ☐SEPARATE

(3) ☒CONTRACTOR SELECT

E. ☐APPLICATION LISTS

(1) ☐INTEGRAL

(2) ☐SEPARATE

(3) ☐PLM MAINTAINED

(4) ☐CONTRACTOR SELECT

F. ☐OTHER

☒REQUIRED (Specify Levels of ASSY): _________________

* NOTE: USE OF SEPARATE PARTS OR WIRING LISTS ARE NOT RECOMMENDED ESPECIALLY WITH TYPE 3D TDPS.

8. TDP DATA MANAGEMENT PRODUCTS

☐TECHNICAL DATA PACKAGE LIST (TDPL)

B. REMARKS:

☐SOURCE CONTROL APPROVAL REQUEST

☐DOCUMENT NUMBER ASSIGNMENT REPORT

☐PROPOSED CRITICAL MANUFACTURING PROCESS DESCRIPTION

☐ENGINEERING DRAWING TREE

☐TO LOWEST REPAIRABLE UNIT (LRU) LEVEL

☐TO LOWEST COMPONENT LEVEL

☐OTHER (DESCRIBE):

9. TDP METADATA

☐TDP METADATA REQUIRED (describe requirements):

10. TDP SUPPLEMENTARY DATA

☐TDP SUPPLEMENTARY DATA REQUIRED (describe requirements):

11. OTHER TAILORING (Attach additional sheets as necessary)

	ASME Y14.38	Abbreviations and Acronyms for Use on Drawings and Related Documents
ASME Y14.44	Reference Designations for Electrical and Electronics Parts and Equipment
ASME Y14.1	Decimal Inch Drawing Sheet Size and Format
ASME Y14.3	Paragraph 4.7 violates NAVAIR CM policy and will not apply

DID DI-SESS-81000F: The MDP shall include, but shall not be limited to: details of unique processes essential to design and manufacture; details of performance ratings; dimensional and tolerance data; critical manufacturing assembly sequences; toleranced input and output parameters; schematics; mechanical and electrical connections; physical characteristics, including form and finishes; details of material identification; inspection requirements and criteria; necessary calibration information; and quality control data. The MDP shall represent the configuration of the item at the time of delivery of the MDP. Changes by revision authorization documents shall be incorporated into the affected documents of the MDP. The product drawing for an item which may be procured as a spare or repair part, shall show directly, or by a specification referenced thereon, the reliability requirement applicable to the item described thereon.

CDR

Drawing List	Installation Drawings
Dimensioned Floor Plans	Assembly Drawings
Dimensioned Major Components	Wiring Harness Drawings
Interconnect Wiring Diagrams	Cable Assembly Drawings

Network Interconnections Computer/Network Rack Configurations Altered Item Drawings Layout Drawings

PCA (Incremental) All drawings with final product baseline detailed

PCA (Final) All drawings with final product baseline detailed

12. PROCURING ACTIVITY TITLE, SIGNATURE AND DATE

TITLE:

TMSS

SIGNATURE:

LAQUISHA THOMAS

DATE:

15 MARCH 2022

Page 5 of 63 Pages

C O N T R A C T D A T A R E Q U I R E M E N T S L I S T

Form Approved

A. CONTRACT LINE ITEM NO.

B. EXHIBIT

C. CATEGORY:

E Lot 4

TDP _____ TM _X ___ OTHER _ ______________________

D. SYSTEM/ITEM

E. CONTRACT/PR NO.

F. CONTRACTOR

LOT VIII AH-1Z Device 2F197-1

1. DATA ITEM NO.

2. TITLE OF DATA ITEM

3. SUBTITLE

17. PRICE GROUP

Y001

PLANNED MAINTENANCE SYSTEM (PMS)

MAINTENANCE REQUIREMENT CARDS (MRC) & SEQUENCE CONTROL CHART (SCC)

4. AUTHORITY (Data Acquisition Document No.)

5. CONTRACT REFERENCE

6. REQUIRING OFFICE

18. ESTIMATED

TOTAL PRICE

MIL-P-29005B & TMCR 17-18