ESBD_376044_1728073218364_Questions #2.pdf
PDF 193 KB Posted
- Attached to
- UNTHSC Gibson Library 3rd Floor Provost Suite
- Solicitation number
- RFCSP769-25-992ER
- Issued by
- Tarrant County, Frankston Town, Texas
About this file
This document is a question and answer sheet related to a Request for Competitive Sealed Proposal (RFCSP) issued by the University of North Texas Health Science Center (UNTHSC) for the Gibson Library 3rd Floor Provost Suite project. The project involves general construction services to carve out a 2,780 square foot Executive Office Suite for the Office of the Provost on the 3rd floor of the Gibson Library. The project must be completed between January 6, 2025 and April 16, 2025, with substantial completion by May 1, 2025. This document addresses two specific questions - one regarding wood veneer door finishes and another regarding glass thickness in the office spaces. The agency provided photos of the existing doors to assist contractors in pricing the work and clarified that 1/2 inch glass should be used.
The contract opportunity is located in the state of Texas, specifically within Tarrant County and the town of Frankston. Proposals for this project are due on October 10, 2024 and no further site visits will be scheduled. The selected general contractor will be required to coordinate construction efforts with the general contractor for ongoing renovation work in the greater library.
View the file
Other files
Show all 40
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATE: October 4, 2024
TO: Potential Respondents
FROM: Elaine Robbins – Construction Contract Expeditor II
SUBJECT: Questions #2
RFCSP769-25-992ER
UNTHSC Gibson Library 3rd Fl Provost Suite
This document is being issued to answer questions that have been submitted as follows:
1) Question #17 which was in Questions #1 posted on October 1, 2024 regarding doors
– see initial question with answer below:
“17) The project calls for wood veneer doors but the project manual states to “match existing”. Can the existing door finish scheduled be provided so we can provide an accurate quote to match existing?
ANSWER: We do not know the existing wood door veneer species, this will have to be field verified by the appropriate sub to confirm.”
There was an inquiry submitted indicating that with minimal information that had been given, pricing could be drastically affected with the pertinent details.
Given that proposals are due next week on October 10, 2024, and no other site visits will be scheduled, I was able to get photos of the door and the hardware that I hope will help with subs trying to provide pricing.
See photo attachments.
2) Another question came in stating that glazing contractors were asking a question concerning the thickness of the glass at the offices. They had found that there was some confusion as to whether they should be quoting ½ inch or 1 inch glass between specifications and the details.
ANSWER: Contractors can use ½” (half inch) for your pricing.
File details come from the government source that posted it. Updated .