DTFASA-17-R-00092.pdf

OFFEROR'S COPY

SOLICITATION NO: DTFASA-17-R-00092 DEPARTMENT OF

ISSUE DATE: November 30, 2016

TRANSPORTATION

PROPOSAL DUE DATE: January 13, 2017

FOR:

Denver ATCT Roof Repairs

LOCATION: Denver, CO

CONTRACTING OFFICER:

Michelle Gunia

Western Service Area

TABLE OF CONTENTS

SEC DESCRIPTION SEC DESCRIPTION

PART I - THE SCHEDULE PART II - CONTRACT CLAUSES

A SOLICITATION/CONTRACT FORM I CONTRACT CLAUSES

B

SUPPLIES OR SERVICES AND

PRICES/COSTS PART III - LISTS OF DOCUMENTS, EXHIBITS, & OTHER ATTACH.

C

DESCRIPTION/SPECS/WORK

STATEMENT

J

LISTS OF ATTACHMENTS

D PACKAGING AND MARKING n/a PART IV - REPRESENTATIONS & INSTRUCTIONS

E INSPECTION AND ACCEPTANCE

K

REPRESENTATIONS,

CERTIFICATIONS, AND OTHER

STATEMENTS OF OFFERORS

F

DELIVERIES OR PERFORMANCE

G

CONTRACT ADMINISTRATION

DATA

L

INSTRUCTIONS, CONDITIONS,

AND NOTICES TO OFFERORS

H

SPECIAL CONTRACT

REQUIREMENTS

M

EVALUATION FACTORS FOR

AWARD

This acquisition is: Competitive Proposals

Offers from small businesses types only will be accepted.

Site Visit December 13th, 2016 0730 MST

SOLICITATION, OFFER

AND AWARD

2. TYPE OF SOLICITATION

6. PROJECT NO. 4. CONTRACT NO. 5. REQUISITION/

PAGE OF PAGES

7. ISSUED BY CODE 8. ADDRESS OFFER TO

SOLICITATION

(Construction, Alteration, or Repair)

1. SOLICITATION NO. 3. DATE ISSUED

IMPORTANT -- The "offer" section on the reverse must be fully completed by offeror.

9.

INFORMATION

A. NAME B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

NOTE: In sealed bid solicitations "offer" and "offeror" means "bid" and "bidder"

CALL:

FOR

SEALED BID (IFB)

NEGOTIATED BID (RFP)

WS-17-00775

FEDERAL AVIATION ADMINISTRATION

WESTERN SERVICE AREA

1601 LIND AVE SW

AAQ-530-ANM ACQUISITION GROUP

AAQ530ANM-AFN

RENTON WA 98057

Michelle Gunia 425-227-2605 x

11/22/2016 78

PURCHASE REQUEST NO.

DTFASA-17-R-00092

10. THE CONTRACT AUTHORITY REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS (Title, identifying no., date)

11. The Contractor shall begin performance within

12A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

award notice to proceed. The performance period is mandatory, negotiable. (See ________________________________________________ .)

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and is not required.is, B. An offer guarantee

C. All offers are subject to the (1) work requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

(date). If this is a sealed bid solicitation, offers must be publicly opened at that time . Sealed envelopes containing offers shall be marked to show the offeror's name and address. The solicitation number, and the date and time offers are due.

D. Offers providing less than

12B. CALENDAR DAYSYES NO

(If "YES", indicate within how many calendar days after award in item 12B.)

45 45 calendar days and complete it within ________________ ________________ calendar days after receiving

1 1500

01/13/2017 x x x x copies to perform the work required are due at the place specified in Item 8 by _____________ ___________________ (hour) local time calendar days for Contract Authority acceptance after the date offers are due will not be considered and will _________________ be rejected.

17. The offeror agrees to perform the work required at the prices specified below in strict accordance with the terms of this solicitation, if this offer is accepted by the Contract Authority in writing within ____________________ calendar days after the date offers are due. (Insert any number equal to or greater than the minimum requirement stated in item 13D. Failure to insert any number means the offeror accepts the minimum in item 13D.)

14. NAME AND ADDRESS OF OFFEROR (Include ZIP Code) 15. TELEPHONE NO. (Include area code)

16. REMITTANCE ADDRESS (Include only if different than item 14)

CODE FACILITY CODE

AMOUNTS

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGEMENT OF AMENDMENTS

OFFER (MUST BE FULLY COMPLETED BY OFFEROR)

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER (Type or print) 20B. SIGNATURE 20C. OFFER DATE

AWARD (To be completed by Contract Authority)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN

(4 copies unless otherwise specified)

ITEM 25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

26. ADMINISTERED BY CODE 27. PAYMENT WILL BE MADE BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this document and return (Contractor is not required to sign this document.)

Your offer on this solicitation is hereby accepted as to the items listed. This award consummates the contract, which consists of (a) the Contract Authority solicitation and your offer, and (b) this contract award.

No further contractual document is necessary.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED TO SIGN (Type or print) 31A. NAME OF CONTRACTING OFFICER (Type or print)

30B. SIGNATURE 30C. DATE 31B. CONTRACT AUTHORITY 31C. AWARD DATE

BY

2PAGE OF

FEDERAL AVIATION ADMINISTRATION

WESTERN SERVICE AREA

1601 LIND AVE SW

AAQ-530-ANM ACQUISITION GROUP

AAQ530ANM-AFN

RENTON WA 98057

Michelle J. Gunia

28. NEGOTIATED AGREEMENT 29. AWARD

Contractor agrees to furnish and deliver all items or perform all work requirements identified on this form and any continuation sheets for the consideration stated in this contract. The rights and obligations of the parties to this contract shall be governed by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certifications, and specifications incorporated by reference in or attached to this contract.

copies to issuing office.)

Continued...

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 78

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DTFASA-17-R-00092

(A) (B) (C) (D) (E) (F)

Delivery: 11/01/2016

Delivery Location Code: S690530M

S690530M

690530 DOT FAA AJW 2W12

ENROUTE FSS ENGR NM8GH5

1601 LIND AVE SW A

RENTON WA 980573356 US

Period of Performance: 06/15/2017 to 08/01/2017

0001 All items not covered in items 002-17 Below in order to provide all labor, materials, tools and equipment necessary to remove and replace approximately 9,982 ft.-2 of the ballasted EPDM roofing system the Denver Airport Traffic Control tower (ATCT) Base and Link Buildings located at the Denver (DEN) International Airport, Denver, CO. The replaced roof shall be provided with a

20 year roof warranty. During the removal and replacement, the contractor shall maintain the integrity and functionality of the existing electrical lighting protection system that overlays the existing roof.

Remove and replace the existing ballasted EPDM roofing system to include the parapet cap, interior walls lining, associated appurtenances, i.e., vents, and assess the integrity of the existing ballast for reuse.

The interior parapet walls shall be examined for any damage, mold, etc., and repaired/replaced as needed.

The link roof over the eastside loading dock shall be removed and repaired from water damage.

Replace all mechanical lightning protection system roof clips, mechanical, connections and fasteners such as the ends of bonding jumpers connected to exterior metallic louvers and vents.

Electronic & IT: 03

0002 CIVIL: 1 EA

Insurance-Liability

Continued ...

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

4 78

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

DTFASA-17-R-00092

(A) (B) (C) (D) (E) (F)

0003 Temporary Barricade 1 EA

0004 Temporary Sanitation 1 EA

0005 Staging Rental 1 EA

0006 Mobilization/Demobilization 1 EA

0007 Field Personnel, Supt 4 WK

0008 Roof Replacement/Repair 1 EA

0009 Ballast Replacement 1% of existing square footage 1 EA

0010 Hatch Railing 1 EA

0011 Hatch Ladder 1 EA

0012 Lift rental 1 EA

0013 Dump Fees 1 EA

0014 Crane Mobilization 1 EA

0015 Lift Rental 1 EA

0016 Material Handler 1 EA

0017 Electrical 1 EA

0018 TOTAL FOR ALL ITEMS 1 EA

Section B - Supplies or Services/Prices

Section B - Schedule

Clause List

SA24 PRICES/COSTS FOR CONSTRUCTION

Furnish all labor, materials, equipment, transportation, insurance, notifications, licenses, permits, fees and supervision necessary for the Denver International Airport Roof Repairs in accordance with the specifications, drawings, contract clauses, and wage rates.

The offered price shall encompass all costs related to (a) direct and indirect labor, fringe benefits, overhead, G&A expenses, profit, material, equipment, other direct costs, insurance, freight, handling, transportation, inspection, testing, operation and maintenance manuals, bonds, etc., (b) federal, state, and local taxes, (c) all applicable fees permits, licenses, and (d) any miscellaneous charges.

An offeror is required to provide a price for each contract line item (CLIN). Failure to comply may result in the rejection of the subject offer. A single award shall be made. There shall be no split award. In the event that the CLIN price for any line item is materially unbalanced, the entire offer may be rejected without discussion with the offeror.

In the event of any disparity between the CLIN price and the total offered price, the CLIN price shall be deemed correct, and the total offered amount shall be revised accordingly, unless available information indicates otherwise.

Effective April 1, 1996, the Federal Aviation Administration (FAA) began operating under the new FAA Acquisition Management System. The l996 DOT Appropriation Act, Public Law 104-50, mandated that the FAA rewrite its acquisition regulations and granted legislative relief from certain laws. The Federal Acquisition Regulations (FAR), Federal Acquisition Streamlining Act of 1994, Small Business Act, and Competition in Contracting Act, are three of these laws.

(End of Clause)

SA28 COST OF PERFORMANCE AND PAYMENT BONDS

Offerors are instructed that if (1) any of the following bond clauses are present in Part II - Section I of this Request for Offers, and if (2) the sum of Contract Line Items (CLIN) in B001 above is either at or above $150,000, then they shall include their fee-quote for these bonds in the TOTAL price at B001. If either condition 1 or 2 above is not met, then offerors will not include a fee-quote for bonds.

3.4.1-4 Performance Bond Requirements 3.4.1-5 Payment Bond Requirements

(End of Clause)

SA30 SITE VISIT

There is an optional site visit on December 13, 2016 at 0730 MST.

a. Meeting point.

FAA Denver TRACON Visitor's Parking Lot, 26705 East 68th Ave Denver, CO 80249.

b. The FAA facility escort has been instructed not to answer any questions about the project during the site visit, please do not ask them any. All questions from the site visit must be submitted in writing according to the RFO¿s instructions in Section B, Clause B005 Solicitation Questions (above). The FAA assumes no responsibility for any conclusions or interpretations made by the contractor based on the information received by any means other than in writing from the Contracting Officer. The FAA does not assume responsibility for any understanding reached or representation made concerning conditions, which can affect the work, by any of its officers or agents before the execution of this contract, unless that understanding or representation is expressly stated in the contract.

c. To attend the site visit, advance notice by Email is required by December 11th 2016, at 1100 MST to the FAA points of contact listed just below. You are required to provide your company representative¿s name.

POC: Charles A Andrews charles.a.andrews@faa.gov (425)227-1347

(End of Clause)

The remainder of this page has been intentionally left blank.

Section C - Description/Specifications

Scope of Work

SCOPE OF WORK

C001. Technical Specification: You must obtain an official copy of the technical specification and drawings (drawings are an attachment to the specification) from the FAA Contract Opportunities website:

https://faaco.faa.gov/. Select "Announcements" from the left-side menu, then select the “more search options” link in the middle of the page, then enter the RFO number DTFASA-17-R-00092 in the "Title / Abstract Text" search field and click the “search” button at the bottom of the page. Then click on the resulting hyperlink. At the next web page, follow the instructions for receiving electronic files for the technical specification and drawings.

DOCUMENT TYPE Electronic FILE NAME

Technical Specification

Summary of Work 100 pct DEN ATCT Roof Design Document

Drawings

Included above

Clause List

Section D - Packaging and Marking

Clause List

Section E - Inspection and Acceptance

Clause List

3.10.4-1 CONTRACTOR INSPECTION REQUIREMENTS (APR 1996)

3.10.4-2 INSPECTION OF SUPPLIES - FIXED PRICE (NOV 1997)

3.10.4-2 INSPECTION OF SUPPLIES - FIXED PRICE (NOV 1997) - ALTERNATE I (NOV 1997)

3.10.4-2 INSPECTION OF SUPPLIES - FIXED PRICE (NOV 1997) - ALTERNATE II (NOV 1997)

3.10.4-10 INSPECTION OF CONSTRUCTION (SEP 2009)

3.10.4-14 ASSIGNMENT OF A QUALITY RELIABILITY OFFICER (QRO) (OCT 2015)

Section F - Deliveries or Performance

Clause List

3.11-33 F.O.B. ORIGIN WITH DIFFERENTIALS (APR 1999)

(a) The term "f.o.b. origin, with differentials," as used in this clause, means--

(1) Free of expense to the Government delivered--

(i) On board the indicated type of conveyance of the carrier (or of the Government, if specified) at a designated point in the city, county, and State from which the shipments will be made and from which line-haul transportation service (as distinguished from switching, local drayage, or other terminal service) will begin;

(ii) To, and placed on, the carrier's wharf (at shipside, within reach of the ship's loading tackle, when the shipping point is within a port area having water transportation service) or the carrier's freight station;

(iii) To a U.S. Postal Service facility; or

(iv) If stated in the SIR, to any Government-designated point located within the same city or commercial zone as the f.o.b. origin point specified in the contract (commercial zones are prescribed by the Interstate Commerce Commission at 49 CFR 1048); and

(2) Differentials for mode of transportation, type of vehicle, or place of delivery as indicated in Contractor's offer may be added to the contract price.

(b) The Contractor shall--

(1) (i) Pack and mark the shipment to comply with contract specification; or

(ii) In the absence of specifications, prepare the shipment in conformance with carrier requirements to protect the goods and to ensure assessment of the lowest applicable transportation charge;

(2) (i) Order specified carrier equipment when requested by the Government; or

(ii) If not specified, order appropriate carrier equipment not in excess of capacity to accommodate shipment;

(3) Deliver the shipment in good order and condition to the carrier, and load, stow, trim, block, and/or brace carload or truckload shipment (when loaded by the Contractor) on or in the carrier's conveyance as required by carrier rules and regulations;

(4) Be responsible for any loss of and/or damage to the goods--

(i) Occurring before delivery to the carrier;

(ii) Resulting from improper packing and marking; or

(iii) Resulting from improper loading, stowing, trimming, blocking, and/or bracing of the shipment, if loaded by the Contractor on or in the carrier's conveyance;

(5) Complete the Government bill of lading supplied by the Federal Aviation Administration, (FAA), or, when a Government bill of lading is not supplied, prepare a commercial bill of lading or other transportation receipt. The bill of lading shall show--

(i) A description of the shipment in terms of the governing freight classification or tariff (or Government rate tender) under which lowest freight rates are applicable;

(ii) The seals affixed to the conveyance with their serial numbers or other identification;

(iii) Lengths and capacities of cars or trucks ordered and furnished;

(iv) Other pertinent information required to effect prompt delivery to the consignee, including name, delivery address, postal address and ZIP code of consignee, routing, etc.;

(v) Special instructions or annotations requested by the FAA for commercial bills of lading; e.g.,--

(A) "To be converted to a Government bill of lading," or

(B) "This shipment is the property of, and the freight charges paid to the carrier(s) will be reimbursed by, the Government"; and

(vi) The signature of the carrier's agent and the date the shipment is received by the carrier; and

(6) Distribute the copies of the bill of lading, or other transportation receipts, as directed by the FAA.

(c) (1) It may be advantageous to the offeror to submit f.o.b. origin prices that include only the lowest cost to the Contractor for loading of shipment at the Contractor's plant or most favorable shipping point. The cost beyond that plant or point of bringing the supplies to the place of delivery and the cost of loading, blocking, and bracing on the type vehicle specified by the Government at the time of shipment may exceed the offeror's lowest cost when the offeror ships for the offeror's account. Accordingly, the offeror may indicate differentials that may be added to the offered price. These differentials shall be expressed as a rate in cents for each 100 pounds (CWT) of the supplies for one or more of the options under this clause that the Government may specify at the time of shipment.

(2) The differential(s) will be considered in the evaluation of offers to determine the lowest overall cost to the Government. If, at the time of shipment, the Government specifies (normally on a Government bill of lading) a mode of transportation, type of vehicle, or place of delivery for which the offeror has set forth a differential, the Contractor shall include the total of such differential costs (the applicable differential multiplied by the actual weight on the Government bill of lading) as a separate reimbursable item on the Contractor's invoice for the supplies.

(3) The Government shall have the option of performing or arranging at its own expense any transportation from Contractor's shipping plant or point to carrier's facility at the time of shipment and, whenever this option is exercised, the Government shall make no reimbursement based on a quoted differential.

(4) Offeror's differentials in cents for each 100 pounds for optional mode of transportation, types of vehicle, transportation within a mode, or place of delivery, specified by the Government at the time of shipment and not included in the f.o.b. origin price indicated in the Schedule by the offeror, are as follows: (carload, truckload, less-than truckload, wharf, flatcar, driveaway, etc.)

(End of clause)

Section G - Contract Administration Data

Clause List

3.10.1-23 CONTRACTING OFFICER'S REPRESENTATIVE-CONSTRUCTION CONTRACTS (APR

2012)

(a) The Contracting Officer may appoint other Government personnel to accomplish certain contract administration matters. While there shall be various titles and divisions of duties for these individuals, generically they are known as Contracting Officer's Representatives (CORs). The Contracting Officer will provide written notice of COR appointment(s), setting forth the authorities and limitations, to the Contractor within 5 calendar days prior to the notice to proceed. COR duties may include, but are not limited to:

(1) Perform as the authorized representative of the Contracting Officer for technical matters, including interpretation of specifications and drawings, and inspection and review of work performed.

(2) Perform as the authorized representative of the Contracting Officer for administrative matters, including reviewing payments, and updated delivery schedules.

(b) These representatives are authorized to act for the Contracting Officer in all specifically delegated matters pertaining to the contract, except:

(1) contract modifications that change the contract price or cost, technical requirements or time for performance, unless delegated field change order authority;

(2) suspension or termination of the Contractor's right to proceed, either for default or for convenience;

(3) final decisions on any matters subject to appeal, e.g., disputes under the "Contract Disputes" clause; and

(4) final acceptance under the contract.

(End of clause)

SA16 BID GUARANTEE BOND, PERFORMANCE AND PAYMENT BONDS

a) Each offeror shall provide a 20% offer/bid guarantee bond.

b) The successful offeror shall be required to furnish Performance and Payment Bonds with sureties acceptable to the Government in the following amounts:

(1) Performance Bonds in the amount of 100% of the contract price.

(2) Payment Bonds in the amount of 100% of the contract price.

c) Only bid bonds and performance and payment bonds from companies on the Department of the Treasury¿s Listing of Approved Sureties (Department Circular 570) will be accepted. This information may be found at the following website:

http://fms.treas.gov/c570/c570.html

Section H - Special Contract Requirements

Clause List

3.1.9-1 ELECTRONIC COMMERCE AND SIGNATURE (JUL 2013)

(a) The Electronic Signatures in Global and National Commerce Act (E-SIGN) establishes a legal equivalence between:

(1) Contracts written on paper and contracts in electronic form;

(2) Pen-and-ink signatures and electronic signatures; and

(3) Other legally-required written records and the same information in electronic form.

(b) With the submission of an offer, the offeror acknowledges and accepts the utilization of electronic commerce as part of the requirements of this solicitation and the resultant contract.

(c) Certain documents may need to be provided or maintained in original form, such as large scale drawings impractical to convert to electronic format or a document with a raised seal signifying authenticity. This clause does not change or affect any other requirements that a document must be in paper format to satisfy legal requirements such as for certain real estate transactions.

(d) The use of electronic signature technology is authorized under this solicitation and the resulting contract.

Contractors may use the following means of electronic signature technology Docusign and ESignatures by Adobe .

(End of Clause)

3.8.2-17 KEY PERSONNEL AND FACILITIES (MAY 1997)

(a) The personnel and/or facilities as specified below are considered essential to the work being performed hereunder and may, with the consent of the contracting parties, be changed from time to time during the course of the contract.

(b) Prior to removing, replacing, or diverting any of the specified personnel and/or facilities, the Contractor shall notify in writing, and receive consent from, the Contracting Officer reasonably in advance of the action and shall submit justification (including proposed substitutions) in sufficient detail to permit evaluation of the impact on this contract.

(c) No diversion shall be made by the Contractor without the written consent of the Contracting Officer.

(d) The key personnel and/or facilities under this contract are:

Superintendant Site Safety and Health Officer

(List key personnel and/or facilities)

3.13-15 CONFIDENTIALITY OF DATA AND INFORMATION (OCT 2011)

(a) The contractor and any of its subcontractors, in performance of this contract, may need access to and use of various types of data and information in the possession of the Government, which the Government obtained under conditions which restrict its right to use and disclose data and information or which may be of a nature that its dissemination or use, other than in the performance of this contract, would be adverse to the interests of the Government or other parties. Therefore, the contractor and its subcontractors agree to abide by any restrictive use conditions on such data and not to: (1) knowingly disclose such data and information to others without written authorization from the Contracting Officer, unless the Government has made data and information available to the public; and (2) use for any purpose other than the performance of this contract any data which bears a restrictive marking or legend. For the sole purpose of this clause, "information" means any communication or representation of knowledge such as facts, data, or opinions in any medium or form, including textual, numerical, graphic, cartographic, narrative or visual form. Data processed in such a way that it can increase the knowledge of the person who receives it. Information is the output, or finished goods, of information systems.

(b) In the event the work required to be performed under this contract requires access to proprietary data and information of other companies, the contractor must obtain agreement from such other companies for such use unless such data are provided or made available to the contractor by the Government. Two copies of such company-to-company agreements must be furnished promptly to the Contracting Officer for information only. These agreements must prescribe the scope of authorized use of disclosure and other terms and conditions to be agreed upon between the parties thereto. It is agreed by the contractor that any such data, whether obtained by the contractor pursuant to the aforesaid agreement or from the Government, must be protected from unauthorized use or disclosure to any individual, corporation, or organization so long as it remains proprietary.

(c) The contractor agrees to conduct formal training to make employees aware of the requirement to maintain confidentiality of data and information, as required above, to the end that they will be disciplined if the necessity to refrain from divulging either the proprietary data of other companies or data that are obtained from the Government to anyone except as authorized. The contractor must obtain from each employee engaged in any effort connected with this contract an agreement, in writing, which must in substance provide that such employee will not, during his/her employment by the contractor or anytime thereafter, disclose to others or use for his/her own benefit or the future benefit of any individual any trade secrets, confidential information, or proprietary/restricted data (to include Government "For Official Use Only") received in connection with the work under this contract.

(d) The contractor agrees to hold the Government harmless and indemnify the Government as to any cost/loss resulting from the unauthorized use or disclosure of third party data or software by the contractor, its employees, subcontractors, or agents.

(e) The contractor agrees to include the substance of this clause in all subcontracts awarded under this contract. The Contracting Officer will consider case-by-case exceptions to this requirement for individual subcontracts in the event that: (1) the contractor considers the application of the prohibition of this clause to be inappropriate and unnecessary in the case of a particular subcontract; (2) the contractor provides a written statement affirming absolute unwillingness of a subcontractor to perform, absent some relief from the substance of this prohibition; (3) use of an alternate subcontract source would unreasonably detract from the quality of effort; and (4) the contractor provides the Contracting Officer timely written advance notice of these and any other extenuating circumstances.

(f) Except as the Contracting Officer specifically authorizes in writing, upon completion of all work under this contract, the contractor must return all such data and information obtained from the Government, including all copies, modifications, adaptations, or combinations thereof, to the Contracting Officer. Data obtained from another company must be disposed of in accordance with the contractor's agreement with that company, or if the agreement makes no provision for disposition, must be returned to that company. The contractor must further certify in writing to the CO that all copies, modifications, adaptations, or combinations of such data or information which cannot reasonably be returned to the Contracting Officer (or to the appropriate company), have been deleted from the contractor's (and any subcontractor's) records and destroyed.

(g) These restrictions do not limit the contractor's (or subcontractor's) right to use and disclose any data and information obtained from another source without restriction.

Section I - Contract Clauses

Clause List

3.1-1 CLAUSES AND PROVISIONS INCORPORATED BY REFERENCE (JUL 2011)

This screening information request (SIR) or contract, as applicable, incorporates by reference the provisions or clauses listed below with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make the full text available, or offerors and contractors may obtain the full text via Internet at:

http://conwrite.faa.gov.

(End of clause)

3.1.7-1 EXCLUSION FROM FUTURE AGENCY CONTRACTS (AUG 1997)

3.1.7-2 ORGANIZATIONAL CONFLICTS OF INTEREST (AUG 1997)

3.1.7-4 ORGANIZATIONAL CONFLICT OF INTEREST - MITIGATION PLAN REQUIRED (APR 2012)

3.1.7-5 DISCLOSURE OF CONFLICTS OF INTEREST (MAR 2009)

3.1.8-1 CANCELLATION, RESCISSION AND RECOVERY OF FUNDS FOR ILLEGAL OR IMPROPER

ACTIVITY (OCT 2014)

3.1.8-2 PRICE OR FEE ADJUSTMENT FOR ILLEGAL OR IMPROPER ACTIVITY (OCT 2014)

3.2.2.3-8 AUDIT AND RECORDS (JUL 2010)

3.2.2.3-25 REDUCING THE PRICE OF A CONTRACT OR MODIFICATION FOR DEFECTIVE COST

OR PRICING DATA (OCT 2011)

3.2.2.3-27 SUBCONTRACTOR COST OR PRICING DATA (JUL 2004)

3.2.2.3-29 INTEGRITY OF UNIT PRICES (JUL 2004)

3.2.2.3-30 TERMINATION OF DEFINED BENEFIT PENSION PLANS (JUL 2004)

3.2.2.3-33 ORDER OF PRECEDENCE (MAR 2009)

3.2.2.3-36 REVERSING OR ADJUSTING OF PLANS FOR POSTRETIREMENT BENEFITS OTHER

THAN PENSIONS (PRB) (JUL 2004)

3.2.2.3-40 PRECONTRACT COSTS (JUL 2004)

3.2.2.3-42 DIFFERING SITE CONDITIONS (JUL 2004)

3.2.2.3-43 SITE INVESTIGATION AND CONDITIONS AFFECTING THE WORK (JUL 2004)

3.2.2.3-45 MATERIAL AND WORKMANSHIP (JUL 2004)

3.2.2.3-46 SUPERVISING THE CONTRACT WORK (JUL 2004)

3.2.2.3-47 PERMITS AND RESPONSIBILITIES (JUL 2004)

3.2.2.3-48 OTHER CONTRACTS (MAR 2009)

3.2.2.3-49 PROTECTING EXISTING VEGETATION, STRUCTURES, EQUIPMENT, UTILITIES, AND

IMPROVEMENTS (JUL 2004)

3.2.2.3-50 PROPERTY PROTECTION (OCT 2014)

3.2.2.3-51 OPERATIONS AND STORAGE AREAS (APR 2012)

3.2.2.3-52 USE AND POSSESSION BEFORE THE PROJECT IS COMPLETE (JUL 2004)

3.2.2.3-53 CLEANING UP AND ROADWAY MAINTENANCE (JUL 2004)

3.2.2.3-54 PREVENTING ACCIDENTS (JUL 2004)

3.2.2.3-55 AVAILABILITY AND USE OF UTILITY SERVICES (JUL 2004)

3.2.2.3-56 SCHEDULES FOR CONSTRUCTION CONTRACTS (JUL 2004)

3.2.2.3-57 QUANTITY SURVEYS (JUL 2004)

3.2.2.3-58 LAYOUT OF WORK (MAR 2009)

3.2.2.3-60 SPECIFICATIONS, DRAWINGS, AND MATERIAL OFFERS (MAR 2009)

3.2.2.3-61 RESPONSIBILITY OF THE ARCHITECT-ENGINEER CONTRACTOR (JUL 2004)

3.2.2.3-64 DISMANTLING AND DEMOLISHING OF PROPERTY (JUL 2004)

3.2.2.3-65 USE OF EXPLOSIVES (JUL 2004)

3.2.2.3-66 CONTRACTOR'S DAILY LOG (JUL 2004)

3.2.2.3-67 SPECIAL PRECAUTIONS FOR WORK AT OPERATING AIRPORTS (JUL 2004)

3.2.2.3-68 SAFETY AND HEALTH (OCT 2014)

3.2.2.3-69 SUBCONTRACTS - CONSTRUCTION (JUL 2004)

3.2.2.3-69 SUBCONTRACTS - CONSTRUCTION (JUL 2004) - ALTERNATE I (JUL 2004)

3.2.2.3-73 SHIPPING SPARE PARTS (MAR 2009)

3.2.2.3-74 SITE AND DEPOT LEVEL SPARE PARTS (JUL 2004)

3.2.2.3-83 PROHIBITION AGAINST CONTRACTING WITH INVERTED DOMESTIC CORPORATIONS

(OCT 2015)

3.2.2.7-6 PROTECTING THE GOVERNMENT'S INTEREST WHEN SUBCONTRACTING WITH

CONTRACTORS DEBARRED, SUSPENDED, OR PROPOSED FOR DEBARMENT (APR 2011)

3.2.2.7-8 DISCLOSURE OF TEAM ARRANGEMENTS (APR 2008)

3.2.4-4 FIXED-PRICE CONTRACTS WITH ECONOMIC PRICE ADJUSTMENT-LABOR AND

MATERIAL (APR 1996)

3.2.4-27 LIMITATION OF PRICE AND CONTRACTOR OBLIGATIONS (APR 1996)

3.2.4-28 CANCELLATION OF ITEMS (APR 1996)

3.2.4-36 AWARD FEE (JAN 2004)

3.2.5-1 OFFICIALS NOT TO BENEFIT (APR 1996)

3.2.5-3 GRATUITIES OR GIFTS (JAN 1999)

3.2.5-4 CONTINGENT FEES (OCT 1996)

3.2.5-5 ANTI-KICKBACK PROCEDURES (OCT 2010)

3.2.5-8 WHISTLEBLOWER PROTECTION FOR CONTRACTOR EMPLOYEES (APR 1996)

3.2.5-13 CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT (APR 2010)

3.2.5-14 DISPLAY OF HOTLINE POSTER(S) (APR 2008)

3.3.1-2 PAYMENTS UNDER FIXED-PRICE CONSTRUCTION CONTRACTS (APR 1996)

3.3.1-9 INTEREST (SEP 2009)

3.3.1-10 AVAILABILITY OF FUNDS (APR 2014)

3.3.1-15 ASSIGNMENT OF CLAIMS (APR 1996)

3.3.1-15 ASSIGNMENT OF CLAIMS (APR 1996) - ALTERNATE I (APR 1996)

3.3.1-16 PROHIBITION OF ASSIGNMENT OF CLAIMS (APR 1996)

3.3.1-19 PROMPT PAYMENT FOR CONSTRUCTION CONTRACTS (SEP 2009)

3.3.1-20 PROVIDING ACCELERATED PAYMENT TO SMALL BUSINESS SUBCONTRACTORS (OCT

2012)

3.3.1-34 PAYMENT BY ELECTRONIC FUNDS TRANSFER- SYSTEM FOR AWARD MANAGEMENT

(AUG 2012)

3.3.1-38 UNENFORCEABILITY OF UNAUTHORIZED OBLIGATIONS (APR 2014)

3.3.2-1 FAA COST PRINCIPLES (JAN 2016)

3.4.1-4 PERFORMANCE BOND REQUIREMENTS (OCT 2010)

3.4.1-5 PAYMENT BOND REQUIREMENTS (APR 1996)

3.4.1-6 ADDITIONAL BOND SECURITY (APR 1996)

3.4.1-7 NOTICE TO PROCEED (APR 1996)

3.4.1-9 DEPOSIT OF ASSETS INSTEAD OF SURETY BONDS (APR 1996)

3.4.1-10 INSURANCE - WORK ON A GOVERNMENT INSTALLATION (JUL 1996)

3.4.2-5 TAXES - FOREIGN FIXED-PRICE CONTRACTS (APR 2013)

3.4.2-6 TAXES - CONTRACTS PERFORMED IN U.S. POSSESSIONS OR PUERTO RICO (OCT 1996)

3.4.2-7 FEDERAL, STATE, AND LOCAL TAXES - FIXED-PRICE, NONCOMPETITIVE CONTRACT

(APR 1996)

3.4.2-8 FEDERAL, STATE, AND LOCAL TAXES - FIXED PRICE CONTRACT (APR 2013)

3.4.2-9 NORTH CAROLINA STATE AND LOCAL SALES AND USE TAX - CONSTRUCTION

CONTRACTS (APR 1996)

3.5-1 AUTHORIZATION AND CONSENT (JAN 2009)

3.5-2 NOTICE AND ASSISTANCE REGARDING PATENT AND COPYRIGHT INFRINGEMENT (JAN

2009)

3.5-4 PATENT INDEMNITY - CONSTRUCTION CONTRACTS (JAN 2009)

3.5-10 PATENT RIGHTS - OWNERSHIP BY THE CONTRACTOR (JAN 2009)

3.5-10 PATENT RIGHTS - OWNERSHIP BY THE CONTRACTOR (JAN 2009) - ALTERNATE III (JAN 2009)

3.5-10 PATENT RIGHTS - OWNERSHIP BY THE CONTRACTOR (JAN 2009) - ALTERNATE IV (JAN 2009)

3.5-10 PATENT RIGHTS - OWNERSHIP BY THE CONTRACTOR (JAN 2009) - ALTERNATE V (JAN

2009)

3.5-12 PATENT RIGHTS - OWNERSHIP BY THE GOVERNMENT (JAN 2009)

3.5-12 PATENT RIGHTS - OWNERSHIP BY THE GOVERNMENT (JAN 2009) - ALTERNATE II (JAN 2009)

3.5-22 MAJOR SYSTEM - MINIMUM RIGHTS (JAN 2009)

3.6.1-1 NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (JAN 2010)

3.6.1-3 UTILIZATION OF SMALL, SMALL DISADVANTAGED AND WOMEN-OWNED, AND

SERVICE-DISABLED VETERAN OWNED SMALL BUSINESS CONCERNS (MAR 2009)

3.6.1-4 SMALL, SMALL DISADVANTAGED, WOMEN-OWNED AND SERVICE-DISABLED VETERAN

OWNED SMALL BUSINESS SUBCONTRACTING PLAN (AUG 2012)

3.6.1-4 ALTERNATE I SMALL, SMALL DISADVANTAGED, WOMEN-OWNED AND SERVICE-

DISABLED VETERAN OWNED SMALL BUSINESS SUBCONTRACTING PLAN (OCT 2015)

3.6.1-7 LIMITATIONS ON SUBCONTRACTING (APR 2016)

3.6.1-11 MENTOR-PROTEGE REQUIREMENTS AND EVALUATION (APR 2016)

3.6.1-14 NOTICE OF PARTIAL SMALL BUSINESS SET-ASIDE (JAN 2010)

3.6.1-15 POST-AWARD SMALL BUSINESS PROGRAM RE-REPRESENTATION (APR 2011)

3.6.2-1 CONTRACT WORK HOURS AND SAFETY STANDARDS ACT-OVERTIME COMPENSATION

(JAN 2012)

3.6.2-2 CONVICT LABOR (APR 1996)

3.6.2-9 EQUAL OPPORTUNITY (AUG 1998)

3.6.2-12 EQUAL OPPORTUNITY FOR VETERANS (JAN 2011)

3.6.2-12 EQUAL OPPORTUNITY FOR VETERANS (JAN 2011) - ALTERNATE I (JAN 2012)

3.6.2-13 AFFIRMATIVE ACTION FOR WORKERS WITH DISABILITIES (OCT 2010)

3.6.2-16 NOTICE TO THE GOVERNMENT OF LABOR DISPUTES (APR 1996)

3.6.2-18 DAVIS BACON ACT (OCT 2010)

3.6.2-19 WITHHOLDING-LABOR VIOLATIONS (APR 1996)

3.6.2-20 PAYROLLS AND BASIC RECORDS (APR 2011)

3.6.2-21 APPRENTICES, TRAINEES, AND HELPERS (OCT 2010)

3.6.2-22 SUBCONTRACTS (LABOR STANDARDS) (OCT 2010)

3.6.2-23 CERTIFICATION OF ELIGIBILITY (APR 1996)

3.6.2-35 PREVENTION OF SEXUAL HARASSMENT (AUG 1998)

3.6.2-39 TRAFFICKING IN PERSONS (OCT 2015)

3.6.2-43 PROJECT LABOR AGREEMENT (AUG 2010)

3.6.2-43 PROJECT LABOR AGREEMENT (AUG 2010) - ALTERNATE I (AUG 2010)

3.6.2-44 NOTIFICATION OF EMPLOYEE RIGHTS UNDER THE NATIONAL LABOR RELATIONS

ACT (JAN 2012)

3.6.3-13 RECYCLE CONTENT AND ENVIRONMENTALLY PREFERABLE PRODUCTS (APR 2009)

3.6.3-14 USE OF ENVIRONMENTALLY PREFERABLE PRODUCTS (JUL 2013)

3.6.3-16 DRUG FREE WORKPLACE (MAR 2009)

3.6.3-17 EFFICIENCY IN ENERGY-CONSUMING PRODUCTS (JUL 2013)

3.6.3-19 AFFIRMATIVE PROCUREMENT OF BIOBASED PRODUCTS UNDER SERVICE AND

CONSTRUCTION CONTRACTS (OCT 2013)

3.6.3-20 IEEE 1680 STANDARDS FOR ENVIRONMENTAL ASSESSMENT OF ELECTRONIC

PRODUCTS (APR 2015) - ALTERNATE I (APR 2015)

3.6.3-20 IEEE 1680 STANDARDS FOR ENVIRONMENTAL ASSESSMENT OF ELECTRONIC

PRODUCTS (APR 2015) - ALTERNATE II (APR 2015)

3.6.3-21 EFFICIENCY IN WATER CONSUMING PRODUCTS (JUL 2013)

3.6.3-23 DELIVERY OF ELECTRONIC AND PAPER DOCUMENTS (OCT 2014)

3.6.3-24 ASBESTOS NESHAP COMPLIANCE (OCT 2015)

3.6.4-4 BUY AMERICAN ACT - CONSTRUCTION MATERIALS UNDER NORTH AMERICAN FREE

TRADE AGREEMENT (OCT 2015)

3.6.4-5 BUY AMERICAN - STEEL AND MANUFACTURED PRODUCTS (JUL 2010)

3.6.4-6 BALANCE OF PAYMENTS PROGRAM (MAY 1997)

3.6.4-8 BUY AMERICAN ACT - NAFTA IMPLEMENTATION ACT - BALANCE OF PAYMENTS

PROGRAM (OCT 2014)

3.6.4-10 RESTRICTIONS ON CERTAIN FOREIGN PURCHASES (JAN 2010)

3.6.4-11 INCONSISTENCY BETWEEN ENGLISH VERSION AND TRANSLATION OF CONTRACT

(APR 1996)

3.6.4-14 BALANCE OF PAYMENTS PROGRAM-CONSTRUCTION MATERIALS-NAFTA (JUL 1996)

3.6.4-21 EXPORT CONTROL (JUL 2014)

3.6.5-1 UTILIZATION OF INDIAN ORGANIZATIONS AND INDIAN OWNED ECONOMIC

ENTERPRISES (MAR 2009)

3.7-1 PRIVACY ACT NOTIFICATION (OCT 1996)

3.7-2 PRIVACY ACT (MAY 1997)

3.8.2-11 CONTINUITY OF SERVICES (OCT 2008)

3.9.1-1 CONTRACT DISPUTES (OCT 2011)

3.9.1-2 PROTEST AFTER AWARD (AUG 1997)

3.10.1-1 NOTICE OF INTENT TO DISALLOW COSTS (APR 1996)

3.10.1-3 PENALTIES FOR UNALLOWABLE COSTS (OCT 1996)

3.10.1-4 FOB ORIGIN - GOVERNMENT BILLS OF LADING OR PREPAID POSTAGE (APR 1996)

3.10.1-7 BANKRUPTCY (APR 1996)

3.10.1-8 SUSPENSION OF WORK (SEP 1998)

3.10.1-15 CHANGES-CONSTRUCTION, DISMANTLING, DEMOLITION, OR REMOVAL OF

IMPROVEMENTS (JUL 1996)

3.10.1-16 CHANGES AND CHANGED CONDITIONS (APR 1996)

3.10.1-25 NOVATION AND CHANGE-OF-NAME AGREEMENTS (OCT 2007)

3.10.1-26 CONTRACTOR PERFORMANCE ASSESSMENT REPORTING SYSTEM (APR 2013)

3.10.2-1 SUBCONTRACTS (FIXED-PRICE CONTRACTS) (APR 1996)

3.10.2-6 SUBCONTRACTS FOR COMMERCIAL ITEMS AND COMMERCIAL COMPONENTS (APR

1996)

3.10.3-1 DEFINITIONS (APR 2012)

3.10.3-2 GOVERNMENT PROPERTY - BASIC CLAUSE (APR 2012)

3.10.3-2 GOVERNMENT PROPERTY - BASIC CLAUSE (APR 2012) - ALTERNATE I (APR 2004)

3.10.4-19 GOVERNMENT INDUSTRY DATA EXCHANGE PROGRAM (GIDEP) (JAN 2002)

3.10.4-23 CONTRACTOR AND SUBCONTRACTOR COMPLIANCE WITH FASTENER ACT (NOV 1997)

3.10.6-1 TERMINATION FOR CONVENIENCE OF THE GOVERNMENT (FIXED PRICE) (OCT 1996)

3.10.6-6 DEFAULT (FIXED PRICE CONSTRUCTION) (OCT 1996)

3.10.7-1 INDEMNIFICATION UNDER PUBLIC LAW 85-804 (SEP 2001)

3.11-1 COMMERCIAL BILL OF LADING NOTATIONS (APR 1999)

3.11-61 PREFERENCE FOR U.S. FLAG CARRIERS (APR 1999)

3.11-62 PREFERENCE FOR PRIVATELY OWNED U.S. FLAG COMMERCIAL VESSELS (APR 1999)

3.11-62 PREFERENCE FOR PRIVATELY OWNED U.S. FLAG COMMERCIAL VESSELS (APR 1999) -

ALTERNATE I (APR 1999)

3.11-62 PREFERENCE FOR PRIVATELY OWNED U.S. FLAG COMMERCIAL VESSELS (APR 1999) -

ALTERNATE II (APR 1999)

3.13-5 SEAT BELT USE BY CONTRACTOR EMPLOYEES (OCT 2001)

3.13-10 CONTRACTOR ATTENDANCE AT FAA SPONSORED TRAINING (JAN 2003)

3.13-11 PLAIN LANGUAGE (JUL 2006)

3.13-13 CONTRACTOR POLICY TO BAN TEXT MESSAGING WHILE DRIVING (JAN 2011)

3.13-14 REPORTING EXECUTIVE COMPENSATION AND FIRST-TIER SUBCONTRACT AWARDS

(OCT 2012)

3.14-1 SECURITY REQUIREMENTS - CLASSIFIED CONTRACTS (JUL 2002) - ALTERNATE II (OCT 2010)

3.14-3 FOREIGN NATIONALS AS CONTRACTOR EMPLOYEES (APR 2014)

3.14-5 SENSITIVE UNCLASSIFIED INFORMATION (SUI) (JUL 2013)

3.17-3 WHISTLEBLOWER PROTECTIONS UNDER THE AMERICAN RECOVERY AND

REINVESTMENT ACT (JUL 2010)

3.2.1.5-3 RESTRICTIONS ON SUBCONTRACTING OUTSIDE DISASTER OR EMERGENCY AREA

(JAN 2008)

The Contractor agrees that in performance of the contract in the case of a contract for:

(a) Services (except construction). At least 50 percent of the cost of contract performance incurred for personnel must be expended for employees of the Contractor or employees of other businesses residing or primarily doing business in the area designated in AMS clause 3.2.1.5-1.

(b) Supplies (other than procurement from a non-manufacturer of such supplies). The Contractor or employees of other businesses residing or primarily doing business in the designated area must perform work for at least 50 percent of the cost of manufacturing the supplies, not including the cost of materials;

(c) General Construction. The Contractor must perform at least 15 percent of the cost of the contract, not including the cost of materials, with its own employees or employees of other businesses residing or primarily doing business in the designated area; or

(d) Construction by Special Trade Contractors. The Contractor must perform at least 25 percent of the cost of the contract, not including the cost of materials, with its own employees or employees of other businesses residing or primarily doing business in the designated area.

3.2.1.5-4 CONTINUITY OF SERVICES - MISSION CRITICAL CONTRACTS (JAN 2008)

(a) The contractor recognizes that the supplies and/or services under this contract are critical to FAA and must be continued without interruption during times of National Emergency or Incidents of National Significance. Supplies and/or services to be continued without interruption are:

Roofing must be restored to operational status or temporarily covered to maintain tower critical functions.

(b) National Emergencies or Incidents of National Significance include:

(1) Outbreak of pandemic influenza or infectious disease;

(2) Terrorist attack; and

(3) Natural disaster.

(c) Because the supplies and/or services under this SIR or contract are deemed critical by FAA, the contractor must make every reasonable effort to deliver these supplies and/or services per the contract requirements during times of National Emergency or Incidents of National Significance; however, the presence of this clause does not affect or diminish the Contractor's rights under Default or Termination clauses incorporated into this SIR or contract.

(d) Within 90 days after award, the contractor must submit a Continuity of Contract Performance Plan to the Contracting Officer (CO) for review and acceptance. This plan describes the processes and tools that the contractor will commit to ensure supplies and/or services are delivered as required during times of National Emergency or Incidents of National Significance. This plan must include the following sections:

(1) Plans and Procedures: Detail the plans and procedures in place that will provide for continued contract performance for supplies and/or services during times of National Emergencies or Incidents of National Significance;

(2) Essential Functions: Record functions that are essential to the continuation of mission critical contract performance;

(3) Delegations of Authority, Planned Order of Succession, and Cross-Training: Procedures in place to ensure personnel are available to make key decisions and perform critical services when primary personnel are unavailable;

(4) Alternate Operating Facilities: When the primary facility is unavailable, detail plans to make available other facilities unaffected by the National Emergency or Incident of National Significance. If contract performance allows, this may include alternatives such as telecommute;

(5) Interoperable and Effective Communications: Identify alternate communication systems if primary systems are unavailable;

(6) Critical Records or Data: Identify plans in place to ensure critical records and data are still available to ensure the integrity of contract performance;

(7) Protection of Human Capital: Identify comprehensive plans to protect the overall health and welfare of the workforce in times of National Emergency or Incidents of National Significance;

(8) Testing and Training of the Plan: Detail comprehensive testing and training of the plan to improve the execution of contract performance in times of National Emergency or Incidents of National Significance;

(9) Devolution of Control and Direction: Identify plans and the ability to transfer authority and responsibility of essential functions from the primary location to other sites and employees; and

(10) Reconstitution and Resuming Normal Operations: Identify procedures and processes to expedite the return of contract performance and operations to their normal state.

(e) The Continuity of Contract Performance Plan must be made available by the contractor to all authorized contractor personnel with a "need-to-know" for review and use during the term of the contract.

(f) The Continuity of Contract Performance Plan must be updated as needed.

(End of Clause)

3.2.2.3-37 NOTIFICATION OF OWNERSHIP CHANGES (JUL 2004)

(a) The Contractor (you) must notify FAA in writing within 30 days when you become aware that a change in ownership has occurred or will occur and that the change could affect the value of your capitalized assets in the accounting records, asset valuations, or cause any other cost changes.

(b) You must:

(1) Maintain current, accurate, and complete inventory records of assets and their costs;

(2) Provide the Contracting Officer (CO) access to the records on request;

(3) Ensure that all individual and grouped assets, their capitalized values, accumulated depreciation or amortization, and remaining useful lives are identified accurately before and after each of your ownership changes; and

(4) Retain and maintain depreciation and amortization schedules based on the asset records maintained before each ownership change.

(c) You must include the substance of this clause in all subcontracts under this contract with a value exceeding $1,000,000 and that require cost and price data.

(End of clause)

3.2.2.3-41 PERFORMING WORK (JUL 2004)

The Contractor (you) must perform, using your own organization, work equivalent to at least 30 percent of the total amount of work under the contract on the site. The CO may modify this contract to reduce this percentage if you request a reduction and the CO determines that it would be to the Government's advantage to do so.

(End of clause)

3.2.2.3-44 PHYSICAL DATA (JUL 2004)

Data and information the FAA (we, us) provides or refers to below is for the Contractor's (your) information. We are not responsible for your interpretation of or conclusions based on the data or information. Further, we do not warrant construction methodology which may be included in these documents.

(a) The descriptions of physical conditions on the drawings and in the specifications are the result of site investigations by FAA engineers site surveys..

(b) Other relevant information Denver weather is volatile, access to site and onground transporttaion must be carefully coordinated.

3.2.2.3-50 PROPERTY PROTECTION (OCT 2014) - ALTERNATE I (JUL 2009)

(a) The Contractor (you) must construct and maintain any temporary fences, gates and other facilities needed to preserve crops, control livestock, and protect property. Before cutting a fence, you must take necessary precautions to prevent livestock from straying. You must also prevent loss of tension in or damage to adjacent portions of the fence. You must immediately replace all fencing and gates you cut, remove, damage, or destroy with new materials to the original standard. You may reuse undamaged gates.

(b) You must comply with the property owner's requests to leave gates open or closed.

(c) You must use all necessary precautions to avoid destroying surveying markers such as section corners, witness trees, property corners, mining claim markers, bench markers, triangulation stations, and the like. If you must destroy any marker, you must first notify the agency responsible for the marker, as well as the Contracting Officer's (CO) representative, and replace the markers.

(d) You must use care to prevent unnecessary damage to property in or near the work area caused by your work.

Unnecessary damage is that which you can avoid through efficient and careful performance of the work, taking into account the land rights you have. If you damage any property, you must at once notify the owner or custodian and make or arrange to make prompt and full restitution.

(e) Maps and specifications FAA (we, us) provides may not give the location of all water supply, drainage, irrigation, and other underground facilities. Before entering a tract of land for contract purposes, you must find out from the property owner (or other reasonably available source) the location of any irrigation system, domestic water system, source of water, and drainage system existing on the property, whether serving that property or other property. You must avoid damaging or obstructing these facilities or polluting water supplies.

(f) You must hold us harmless from any and all suits, actions, and claims for damages, including environmental impairment, to property arising from any of your acts or omissions, your subcontractors, or any of your employees or subcontractor employees, in any way related to the work or operations under this contract.

(g) You must indemnify and hold harmless the property owners or parties lawfully in possession against all claims or liabilities asserted by third parties, including all governmental agencies, resulting directly or indirectly from your wrongful or negligent acts or omissions.

(h) Managing and disposing of hazardous wastes and materials may expose the Contractor (you) and FAA (we) to short- and long-term liabilities. To reduce these possible liabilities you must be fully aware of the hazards and regulatory requirements associated with the hazardous materials involved in this project. You must use qualified personnel to handle and transport hazardous materials.

(i) Before commencing work, you must:

(1) Do an environmental assessment of the work the contract requires, identifying tasks which involve using, handling or transporting hazardous materials or wastes. The following work items are known to involve such substances: As removed by, supplied by or used and determined by offeror.

(2) Submit an environmental plan identifying and dealing with each specific task involving the wastes. The plan must be specific enough to demonstrate a thorough understanding of the environmental risks and the appropriate method for dealing with…