Drawings_2_-_Edison_Floor_Replacement_Lower_Level_.pdf

This architectural drawing document pertains to the City of Meriden's floor replacement project at Edison Middle School in Connecticut. The drawing set provides detailed floor plans for the lower level of the facility, including a graphics legend and scale plans for various areas such as classrooms, corridors, locker rooms, toilet facilities, and stair/ramp configurations. The drawings are prepared by Edison Architecture & Interiors located at 4021 Main Street and serve as the basis for the contractor's work scope. The project involves the removal and replacement of approximately 4,088 square feet of VCT flooring in the SOAR hallway, gymnasium, teacher offices, and connected side halls, as delineated on the architectural plans provided.

The flooring contractor is responsible for complete removal and proper disposal of existing flooring, floor surface preparation, installation of a moisture mitigation system (Mapie Planiseal, Sika MB, Ardex MC Rapid, or equivalent), and installation of new VCT flooring to match existing patterns. The contractor must provide and maintain dumpsters for material disposal throughout the project duration and perform floor grinding with HEPA vacuum equipment. The contractor shall take precautions to protect surrounding surfaces during work execution. Work may be scheduled during summer hours from 6:00 a.m. to 2:30 p.m. daily. Furniture moving and VCT waxing are to be performed by others. The project specifications reference a 20-year warranty requirement for the moisture mitigation system.