Drawing - 0.0145_Pocket_Depth-cladding_MITR.pdf
PDF 63 KB Posted
- Attached to
- MITR Chemically Milled Plate
- Solicitation number
- 0000964171
- Issued by
-
Department of Energy
About this file
This is an engineering drawing for a machined metal part titled "MITR PLATE." The part is manufactured from 6061 aluminum alloy and weighs 0.87 pounds. The drawing specifies precise dimensions in inches with tight tolerances: the overall length is 40.095±.005 inches, width is 6.07±.005 inches, and height is 2.25±.005 inches. The part features four rounded corners with a radius of 1.49 inches, an 18-gauge thickness specification, and a 0.0145-inch pocket depth with cladding and a 0.002-inch radius detail.
The drawing includes five manufacturing and quality control notes requiring specific finishing processes: individual vacuum sealing in 5-mil mylar bags, labeling with SAP and serial numbers using thermal transfer labels, electrochemical etching or laser engraving with specific format specifications (10-digit SAP number, 5-digit lot number, and 8-digit serial number), deionized water rinsing to remove contaminants, and final cleaning with denatured alcohol. Standard tolerances apply for angular dimensions (±0.5 degrees) and length dimensions based on decimal places. The drawing was created by Fiona Gailey, reviewed by Dustin Clelland, approved by Taylor Mason, and last revised on 08/06/2026 (Revision 0). The SAP number field is marked as "XXXXX," indicating this is a template or blank specification awaiting assignment of actual part identification numbers.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
40.095±.005
2.25±.005 6.07±.005
22.387±.005 4x R1.49
18 GAUGE
A
.0145
R.002
DETAIL A
SCALE 5 : 1
1. INTENTIONALLY LEFT BLANK
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
5. RINSE WITH DEIONIZED WATER TO REMOVE CHIPS AND OTHER CONTAMINANTS, FOLLOWED BY A WIPE WITH
DENATURED ALCOHOL
0.0145" POCKET DEPTH - CLADDING
A A
B B
6061 Alloy
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:5
0.87 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
07/20/2026
C66T01V0
MITR PLATE
| Sheet1 |
| Top |
| Front |
| Detail View A (5 : 1) |
| Drawing View5 |
File details come from the government source that posted it. Updated .