Drawing - 0.011_Pocket_Depth-cladding_MITR.pdf
PDF 63 KB Posted
- Attached to
- MITR Chemically Milled Plate
- Solicitation number
- 0000964171
- Issued by
-
Department of Energy
About this file
This is an engineering drawing for a machined aluminum component titled "MITR PLATE" (Part Number C66T02V0). The part is manufactured from 6061 alloy aluminum and weighs 0.89 pounds. The plate measures 40.095±0.005 inches in length with a width of 6.07±0.005 inches and features a 0.011-inch pocket depth with cladding. The design includes four rounded corners with a 1.49-inch radius and an 18-gauge thickness specification. Standard tolerances apply with angular tolerances of ±0.5 degrees and surface finish of 63 RMS microinches.
The drawing specifies detailed manufacturing and finishing requirements, including individual vacuum sealing of parts in 5-mil Mylar bags, application of harsh environment thermal transfer labels containing SAP and serial numbers, and electrochemical etching or laser engraving with specific formatting (10-digit SAP number, 5-digit lot number, and 8-digit serial number at 0.13 inches high and no more than 0.002 inches deep). Final processing requires rinsing with deionized water to remove chips and contaminants, followed by wiping with denatured alcohol. All sharp edges must be broken. The drawing was prepared by Fiona Gailey on 07/02/2026, reviewed by Dustin Clelland, approved by Taylor Mason, and revised on 08/06/2026.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
40.095±.005
2.25±.005 6.07±.005
22.387±.005 4x R1.49
18 GAUGE
A
.011
R.002
DETAIL A
SCALE 5 : 1
1. INTENTIONALLY LEFT BLANK
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
5. RINSE WITH DEIONIZED WATER TO REMOVE CHIPS AND OTHER CONTAMINANTS, FOLLOWED BY A WIPE WITH
DENATURED ALCOHOL
C66T02V0
MITR PLATE
0.011" POCKET DEPTH - CLADDING
A A
B B
6061 Alloy
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:5
0.89 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
07/02/2026
| Sheet1 |
| Top |
| Front |
| Detail View A (5 : 1) |
| Drawing View5 |
File details come from the government source that posted it. Updated .