Drawing - 0.0085_Pocket_Depth-cladding_MITR_(1).pdf
PDF 63 KB Posted
- Attached to
- MITR Chemically Milled Plate
- Solicitation number
- 0000964171
- Issued by
-
Department of Energy
About this file
This is an engineering drawing for a manufactured component titled "MITR PLATE" (SAP Number C66T03V0). The part is fabricated from 6061 aluminum alloy and weighs 0.90 pounds, specified in third angle projection with a scale of 1:5. The drawing provides detailed dimensional specifications, including an overall length of 40.095±.005 inches, width of 22.387±.005 inches, and height measurements of 2.25±.005 and 6.07±.005 inches. The part features four radius corners (4x R1.49), an 18-gauge thickness specification, and a 0.0085-inch pocket depth with cladding. Surface finish is specified at 63 RMS microinches, with standard tolerances applied based on decimal places (±0.1 for .0, ±0.01 for .00, and ±0.005 for .000 and .0000).
The drawing includes five manufacturing and quality control notes requiring individual vacuum sealing in 5-mil Mylar bags, application of SAP and serial numbers via thermal transfer labels, electrochemical etching or laser engraving with part identification in a specified format (10-digit SAP number, 5-digit lot number, 8-digit serial number), and final cleaning with deionized water followed by denatured alcohol wipe to remove chips and contaminants. All sharp edges must be broken. The drawing was created on 07/20/2026, approved on 08/06/2026, and was drawn by Fiona Gailey, reviewed by Dustin Clelland, and approved by Taylor Mason.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
THIRD ANGLE PROJECTION
40.095±.005
2.25±.005 6.07±.005
22.387±.005 4x R1.49
18 GAUGE
A
.0085
R.002
DETAIL A
SCALE 5 : 1
1. INTENTIONALLY LEFT BLANK
2. INDIVIDUALLY VACUUM SEAL PARTS INDIVIDUALLY IN 5MIL MYLAR BAGS OR BUYER APPROVED EQUAL.
3. ADD SAP NUMBER AND SERIAL NUMBER TO EACH SEALED BAG WITH A 1 X 3 HARSH ENVIRONMENT THERMAL
TRANSFER LABEL OR BUYER APPROVED EQUAL.
4. ELECTROCHEMICALLY ETCH OR LASER ENGRAVE PARTS WITH SAP NUMBER, LOT, AND SERIAL NUMBER 0.13” HIGH AND NO MORE THAN 0.002" DEEP. FORMAT IS: 10 DIGIT SAP NUMBER - 5 DIGIT LOT NUMBER-8 DIGIT SERIAL
NUMBER (XXXXXXXXXX-XXXXX-XXXXXXXX) OR BUYER APPROVED EQUAL
5. RINSE WITH DEIONIZED WATER TO REMOVE CHIPS AND OTHER CONTAMINANTS, FOLLOWED BY A WIPE WITH
DENATURED ALCOHOL
0.0085" POCKET DEPTH - CLADDING
MITR PLATE
C66T03V0
A A
B B
6061 Alloy
ANGULAR ± 0.5
SURFACE FINISH
RMS
µ in
LENGTH
.0 = ±.1
.00 = ±.01 .000 = ±.005
.0000 = ±.005
PROJECT:
MATERIAL:
UNLESS OTHERWISE SPECIFED:
ALL DIMENSIONS ARE INCHES
STANDARD TOLERANCES: INCHES
NOTE: BREAK ALL SHARP EDGES
SHEET 1 OF 1SCALE: 1:5
0.90 lb
DRAWN BY: Fiona Gailey
TITLE:
APRROVED BY: Taylor Mason
REVIEWED BY: Dustin Clelland
DATE
REV.
SIZE
B
08/06/2026
SAP NUMBER:PART NUMBER:
XXXXX
WEIGHT:
08/06/2026
07/20/2026
| Sheet1 |
| Top |
| Front |
| Detail View A (5 : 1) |
| Drawing View5 |
File details come from the government source that posted it. Updated .