Doc-204-Technical-Data-12.20.2020.pdf

Siler City, NC 27344

(919) 663-1684 CustomerService@Floorazzo.com www.Floorazzo.com

Doc ID: 204 Page 1 of 2 Rev12.20.2020

Floorazzo Tile Technical Data

Description

Homogeneous resilient terrazzo floor covering. Manufactured from marble and/or glass chips embedded in a flexible thermoset resin and then polished to a high-resolution finish.

Technical Specifications

Tile Size Standard: 2’ x ‘2; Optional: 2’ x 4’

Surface Smooth

Backing Smooth

Weight 2.15 lbs./ft2

Overall Thickness 3/16" / 4.8mm

Safety Test Requirement Results

Critical Radiant Flux

ASTM E648 > 0.45 w/cm2 or higher for Class 1 1.09 = Class 1

Smoke Density ASTM E662 Specific optical density (corrected):

max. 450 in the flaming and non-flaming mode

Pass

Slip Resistance ASTM D2047 none (not suitable for ramps) 0.8

Slip Resistance ASTM C1028 none (not suitable for ramps) Dry 0.66 and Wet 0.70

Performance

Antistatic Behavior EN 1815 Antistatic: less than 2 kilovolts (kV) < 2 kV

Durability Residual Indentation

EN 433 < 0.2 mm < 0.2 mm Pass

Shore Hardness ASTM D2240 Shore Hardness Type A > 100

Static Load ASTM F970 Residual Indentation ≤ 0.005" under 250 lbs. pressure

≤ 0.005" under 1000 lbs.

Warranty Commercial Use - 20 years

Adhesive

Mapei Ultrabond

ECO 373

<90% RH

(ASTM F2170)

1/16” x 1/16” x 1/16” Square- Notched Trowel (concrete slab substrate)

125 to 185 sq. ft. (11,6 to 17,2 m2) per 1 U.S. gal. (3,79 L)

Doc ID: 204 Page 2 of 2 Rev12.20.2020

LEED v3

MR Credit 4 Recycled Content For 1 - 2 points: $ value of all materials = min. average 10% recycled content

Marble: Up to 15% pre-consumer & 20% post-consumer; Gem: Up to 21% pre-consumer & 41% post-consumer depending on aggregate material

IEQ Credit 4.1 Low-Emitting Materials (Adhesives)

For 1 point: low-emitting adhesive with a VOC of 70 g/L or less for multipurpose adhesive

Mapei Ultrabond ECO 373 is CRI Green Label Plus #GLP12617 certified and Living Building Challenge (LBC) Red List Free: This product has been verified per the most current Red List on the LBC Website.

IEQ Credit 4.3 Low-Emitting Materials (Flooring)

For 1 point: mineral based finished floor that does not include an organic-based coating or sealer

Marble: Up to 15% pre-consumer & 20% post-consumer; Gem: Up to 21% pre-consumer & 41% post-consumer depending on aggregate material

MR Credit 5 Regional Materials For 1 - 2 points: The material must be manufactured within 500 miles of the project location

LEED v4

Material and Resources (MR)

Environmental Product Declarations

For 1 point: use at least 20 different permanently installed products sourced from at least five different manufacturers that have a publicly available EPD. (Option 1)

3rd Party Certified EPD Pending

Material and Resources (MR)

Material Ingredients

For 1 point: use at least 20 different permanently installed products from at least five different manufacturers that use any a USGBC approved program for reporting material ingredients.

(Option 1)

HPD Available

Indoor Environmental Quality (IEQ

Low Emitting Materials (Adhesives)

For up to 3 points: achieve threshold emission compliance for the required number of product categories or using the budget calculation method.

Mapei Ultrabond ECO 373 is CRI Green Label Plus #GLP12617 certified and Living Building Challenge (LBC) Red List Free: This product has been verified per the most current Red List on the LBC Website.