DI-DRPR-81680A.pdf
PDF 43 KB Posted
- Attached to
- Turnstile Equipment Replacement and Installation Federal contract opportunity
- Solicitation number
- N6426724Q5072
About this file
This document is a Data Item Description (DID) for ENGINEERING DOCUMENTATION PRODUCT DRAWINGS (RE-PROCUREMENT) referenced as DI-DRPR-81680A. The DID provides guidance on the format and content requirements for engineering documentation product drawings to support maintenance, repair, spare procurement, training, testing, and configuration baseline of equipment and systems. The drawings must meet ASME Y14.100-2013 standards or best business practices, and include details such as drawing reference numbers, system/rack names, contact information, sheet numbers, and part identification.
The related federal contract opportunity is for Turnstile Equipment Replacement and Installation, solicitation number N6426724Q5072. This is an all-or-none requirement, and the government will award a single purchase order to the responsible offeror whose proposal conforms to the requirements and is most advantageous based on the stated evaluation criteria. Quotes are due by the response date in the posting, and must be submitted electronically to the provided email address. The contracting agency is the Department of the Navy Naval Sea Systems Command.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Amendment 0003.pdf | ||
| Amendment 0002.pdf | ||
| Amendment 0001.pdf | ||
| CDRL A001 ENGINEERING DOCUMENTATION PRODUCT DRAWINGS_CAD DRAWINGS AS BUILT_DRAFT.pdf | ||
| Combined Synopsis-Solicitation N6426724Q5072.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: ENGINEERING DOCUMENTATION PRODUCT DRAWINGS (RE-PROCUREMENT)
Number: DI-DRPR-81680A Approval Date: 20160525 AMSC Number: 9663 Limitation:
DTIC Applicable: No DTIC Applicable: No Preparing Activity: NS/B023 Project Number: DRPR-2016-004 Applicable Forms:
Use/Relationship:
a. To provide Engineering Documentation Product Drawings, Sanitized to support prototype and limited production of equipment and systems. The drawings shall be used to support the maintenance, repair, spare procurement, training, testing, and configuration baseline of the equipment and system acquired.
b. This Data Item Description (DID) contains suggested guidance for the format and content preparation instructions of the Engineering Documentation Product Drawings resulting from the work task described in the contract SOW.
c. It is not intended that the recommendations contained herein should be applied to every program. This DID should be tailored to the minimum data requirements of the applicable contract.
d. This DID supersedes DI-DRPR-81680.
Requirements:
1. Reference Documents. The applicable issue of the documents and procedure cited herein, including their approval dates and dates of any applicable amendments, notices, and revision shall be as stated herein. The ASME Standard, Y14.100-2013, Engineering Drawing Practices, is available through the American Society of Mechanical Engineers (http://www.asme.org). Further guidance can be obtained through the National Security Agency, Aquisition Logistics and Deployment Review, 9800 Savage Road, Suite 6129, Fort Meade, MD 20755-6129, Attn: B-023.
2. General. Drawings shall meet either the ASME Y14.100-2013 Standard or best business practices, as defined by the customer’s engineering drawing and documentation resources.
3. Format and Content. The following shall be noted on the drawing:
3.1 Each separate type of drawing in the system shall contain a drawing reference number.
3.2 Unclassified System Name and/or Rack Name shall be shown.
3.3 Date, drafter point of contact and government point of contact information.
3.4 Each drawing shall be labeled with a general description (e.g., Rack Elevation, Interconnect Diagram, Cabling List, Power, Parts List, etc).
3.5 Number of sheets shall be shown (Sheet X of X on first sheet and individual sheet number on continuing sheets).
3.6 Page Size (ex: A-size, B-size, D-size, etc.).
Source: https://assist.dla.mil -- Downloaded: 2024-04-19T13:58Z Check the source to verify that this is the current version before use.
http://www.asme.org/
DI-DRPR-81680A
3.7 Front and back of rack shown.
3.8 Each part in the rack shall be identified (Manufacturer, Part Number, etc.).
3.9 Location of equipment in rack (unit numbering method or location numbering method).
3.10 Open or blank spaces in racks shall be identified.
END OF DI-DRPR-81680A
Source: https://assist.dla.mil -- Downloaded: 2024-04-19T13:58Z Check the source to verify that this is the current version before use.
File details come from the government source that posted it. Updated .