- Attached to
- TANC Split Room
- Solicitation number
- N6426725Q5043
About this file
This Data Item Description (DID) provides specifications for Engineering Documentation Product Drawings to support prototype and limited production of equipment and systems. The document, numbered DI-DRPR-81680A and approved on 20160525, outlines detailed requirements for technical drawings that will support maintenance, repair, spare procurement, training, testing, and configuration baseline activities.
Key drawing requirements include: assigning a drawing reference number for each drawing type, showing an unclassified system/rack name, including date and contact information, labeling each drawing with a general description, indicating sheet numbers and page size, displaying front and back rack views, identifying each part in the rack with manufacturer and part number details, specifying equipment location using unit or location numbering methods, and identifying any open or blank rack spaces. The document references the ASME Y14.100-2013 Standard for engineering drawing practices and allows for tailoring to specific contract requirements.
View the file
Other versions and copies of DI-DRPR-81680A
| File | Revision | Posted | Attached to |
|---|---|---|---|
| DI-DRPR-81680A.pdf | Rev. A | Turnstile Equipment Replacement and Installation | |
| DI-DRPR-81680A.pdf | Rev. A | Building 176 Conference Room Upgrade | |
| DI-DRPR-81680A to CDRL A001 and A003.pdf | Rev. A | F-22 Maintenance Stands | |
| CDRL A003 DI-DRPR-81680.pdf | Revision not stated | Underwater Motion Tracking System | |
| DI-DRPR-81680 Engineering Documentation Product Drawings DID.doc | Revision not stated | CALL 002: F-35 Threat and Friendly (TAF) Visual Display System (VDS)” Under CSO FA9302-21-S-C001 |
Who attaches DI-DRPR-81680A
Other files
| File | Type | Posted |
|---|---|---|
| 9. WD.pdf | ||
| 7. CDRL A0002 - ENGINEERING DOCUMENTATION PRODUCT.pdf | ||
| 13. Combined Synopsis & Solicitation.pdf | ||
| 5. BNJ_Redacted.pdf | ||
| 7. Table 3.pdf | ||
| 7. Table 1.pdf | ||
| 7. Table 2.pdf |
On GovTribe
Work with this file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DATA ITEM DESCRIPTION
Title: ENGINEERING DOCUMENTATION PRODUCT DRAWINGS (RE-PROCUREMENT)
Number: DI-DRPR-81680A Approval Date: 20160525 AMSC Number: 9663 Limitation:
DTIC Applicable: No DTIC Applicable: No Preparing Activity: NS/B023 Project Number: DRPR-2016-004 Applicable Forms:
Use/Relationship:
a. To provide Engineering Documentation Product Drawings, Sanitized to support prototype and limited production of equipment and systems. The drawings shall be used to support the maintenance, repair, spare procurement, training, testing, and configuration baseline of the equipment and system acquired.
b. This Data Item Description (DID) contains suggested guidance for the format and content preparation instructions of the Engineering Documentation Product Drawings resulting from the work task described in the contract SOW.
c. It is not intended that the recommendations contained herein should be applied to every program. This DID should be tailored to the minimum data requirements of the applicable contract.
d. This DID supersedes DI-DRPR-81680.
Requirements:
1. Reference Documents. The applicable issue of the documents and procedure cited herein, including their approval dates and dates of any applicable amendments, notices, and revision shall be as stated herein. The ASME Standard, Y14.100-2013, Engineering Drawing Practices, is available through the American Society of Mechanical Engineers (http://www.asme.org). Further guidance can be obtained through the National Security Agency, Aquisition Logistics and Deployment Review, 9800 Savage Road, Suite 6129, Fort Meade, MD 20755-6129, Attn: B-023.
2. General. Drawings shall meet either the ASME Y14.100-2013 Standard or best business practices, as defined by the customer’s engineering drawing and documentation resources.
3. Format and Content. The following shall be noted on the drawing:
3.1 Each separate type of drawing in the system shall contain a drawing reference number.
3.2 Unclassified System Name and/or Rack Name shall be shown.
3.3 Date, drafter point of contact and government point of contact information.
3.4 Each drawing shall be labeled with a general description (e.g., Rack Elevation, Interconnect Diagram, Cabling List, Power, Parts List, etc).
3.5 Number of sheets shall be shown (Sheet X of X on first sheet and individual sheet number on continuing sheets).
3.6 Page Size (ex: A-size, B-size, D-size, etc.).
Source: https://assist.dla.mil -- Downloaded: 2024-04-19T13:58Z Check the source to verify that this is the current version before use.
http://www.asme.org/
DI-DRPR-81680A
3.7 Front and back of rack shown.
3.8 Each part in the rack shall be identified (Manufacturer, Part Number, etc.).
3.9 Location of equipment in rack (unit numbering method or location numbering method).
3.10 Open or blank spaces in racks shall be identified.
END OF DI-DRPR-81680A
Source: https://assist.dla.mil -- Downloaded: 2024-04-19T13:58Z Check the source to verify that this is the current version before use.
File details come from the government source that posted it. Updated .