Combined Synopsis-Solicitation N6426724Q5072.pdf

N6426724Q5072

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 7 Each

WAIST HIGH TURNSTILE WIDTH 36" ADA LINEA

FFP

WAIST HIGH TURNSTILE WIDTH 36" ADA LINEAR BAR

FOB: Destination MFR PART NR: Material

PSC CD: 5660

NET AMT

0002 7 Each

GEOMETRICALLY LOCKING SUPERIOR NO-WEARIN

FFP

GEOMETRICALLY LOCKING SUPERIOR NO-WEARING GEOMETRICK

LOCKING

ENTER/EXIT

FOB: Destination

0003 7 Each

ON BOARD BATTERY BACK UP

FFP

ON BOARD BATTERY BACK UP

FOB: Destination

0004 4 Each

ADJACENT METALLIC PANEL

FFP

ADJACENT METALLIC PANEL

FOB: Destination

0005 14 Each

SOILD SURFACE CARD IN/CARD OUT

FFP

SOILD SURFACE CARD IN/CARD OUT

FOB: Destination

0006 7 Each

PLATFORM SYSTEM LOW PROFILE PLATFORM

FFP

PLATFORM SYSTEM LOW PROFILE PLATFORM

FOB: Destination

0007 2 Each

CABLE COVER 2X2 INVERTED C-CHANNEL OF MA

FFP

CABLE COVER 2X2 INVERTED C-CHANNEL OF MATCHING

FOB: Destination

0008 7 Each

OPERATION PLC PROGRAMMING

FFP

OPERATION PLC PROGRAMMING

FOB: Destination

0009 7 Each

PLC-OPTION ALARM OUT KIT

FFP

PLC-OPTION ALARM OUT KIT

FOB: Destination

0010 5 Each

AREOCABLE

FFP

AREOCABLE

FOB: Destination

0011 1 Each

THREE LANE REMOTE OPERATION

FFP

THREE LANE REMOTE OPERATION

FOB: Destination

0012 1 Each

FOUR LANE REMOTE OPERATION

FFP

FOUR LANE REMOTE OPERATION

FOB: Destination

0013 3 Each

DUAL READER INTERFACE

FFP

DUAL READER INTERFACE

FOB: Destination

0014 1 Each

STAR MULTIPLEXER

FFP

STAR MULTIPLEXER

FOB: Destination

0015 600 Each

18-02 OAS STR

FFP

18-02 OAS STR

FOB: Destination

0016 600 Each

22-06 OAS STR

FFP

22-06 OAS STR

FOB: Destination

0017 1 Each

RACEWAY EQUIPMENT (FOR EXPOSED WIRING, C

FFP

RACEWAY EQUIPMENT (FOR EXPOSED WIRING, CABLES, JUNCTIONS,

ETC…)

FOB: Destination

0018 1 Lot Labor

FFP

Labor, as per the scope in Section C FOB: Destination

0019 1 Each

CDRL A001

FFP

see Sections C and J FOB: Destination

Section C - Descriptions and Specifications

PURCHASE DESCRIPTION

SALES TAX EXEMPTION

The contractor is hereby advised that the United States Government and Agencies thereof are exempt from State and Local Government tax by virtue of Article 6 of the United States Constitution. No exemption certificate is required.

This is an official request for quote (RFQ) utilizing FAR part 13.

NAVSEA HEADQUARTERS

Equipment & installation of turnstiles – Bldg 201, Washington Navy Yard (WNY), D.C.

1. INTRODUCTION

1.1 Naval Sea Systems Command (NAVSEA) Headquarters requires new Security Access Control System (ACS) to secure building 201 which is a Level One restricted area. This requirement falls under the responsibility of the NAVSEA Physical Security Division SEA 00P. The facility houses multiple organizations with hundreds of employees requiring daily access to the facility. An ACS is required to verify an individual’s authorized access and prevent unauthorized personnel from entering.

2. BACKGROUND

2.1 Washington Navy Yard (WNY) building 201 currently has four linear bar turnstiles, LENEL compatible, on the alleyway entrance. Currently installed turnstiles are over 20 years old and are prone to non-operational issues due to age. Many parts are no longer manufactured, and the turnstiles cannot be refitted and are unsustainable at this stage.

2.2 Replacement turnstiles are required to provide critical identification and security of personnel entering the building. Security access is accomplished by utilizing card readers on the turnstiles, which are compatible with the LENEL security system used by NAVSEA. Additionally, NAVSEA has instructed SEA00P to bring online the Riverside entrance as an additional entry way into building 201.

2.3 To accomplish this, the task requires a total of seven Linear Bar Turnstiles, compatible with LENEL (see section 2.4) and in compliance with the Americans with Disabilities Act (ADA); four at the Alleyway (North) entrance in building 201 and three at the riverside (South) entrance of building 201.

2.4 A connection to the Security Guard desk and manual override selectors for safety are required. LENEL is a part of the Advanced Entry Control System (AECS) used as a program of record for all NAVSEA facilities on the WNY installation. LENEL’s software and card readers are utilized by NAVSEA for security of their buildings located on Washington Navy Yard.

3. SCOPE

3.1 SECNAVINST 5500.35 DEPARTMENT OF THE NAVY PHYSICAL SECURITY PROGRAM

3.1.1 States, “Level 1 Restricted Area, the least secure type of restricted area

a. Will be established to provide an increased level of security over that afforded elsewhere aboard the activity to protect a security interest that, if lost, stolen, compromised, or sabotaged will cause damage to the command’s mission or impact upon the tactical capability of the United States;

b. It may also serve as a buffer zone for Level Two and/or level Three restricted areas, thus providing administrative control, safety, and protection against sabotage, disruption, or potentially threatening acts; and

c. Uncontrolled movement within it may or may not permit access to a security interest or asset.”

3.1.2 Building 201 meets the criteria for a Level One buffer zone.

3.2 Requirements

3.2.1 The Contractor shall provide all the following supplies/services necessary to ensure the below list systems are turnkey (the government will provide fourteen (14) LENEL Government Furnished Equipment (GFE) Card readers) to make the systems function per technical specifications:

3.3 Drawings

3.3.1 The Contractor shall provide AutoCAD created and published Equipment Location Details, Construction Drawings and Point-to-Point Wiring Schematics, as pertinent to the contract.

3.4 Shipping / Delivery

3.4.1 The Contractor shall purchase the turnstiles, after acknowledgement and approval by SEA 00P.

3.4.2 The Contractor shall deliver all items. Any deficiencies, missing items, or damage are the responsibility of the Contractor and must be corrected to provide the agreed upon items in this Statement of Work (SOW).

3.4.4 The Contractor shall provide and operate any equipment (i.e; forklift, pallet jack) needed to move the delivered items into storage or position for installation.

3.5 Installation Access

3.5.1 A minimum of two weeks’ prior notice is required for scheduling the installation by the Contractor.

3.5.2 The Contractor shall state the approximate number of days on site in the proposal. SEA 00P will provide the Contractor all required paperwork to be granted access to the Washington Navy Yard installation for contractor employees and commercial deliveries.

3.5.3 The Contractor shall ensure all employees or subcontractors accomplish and submit completed paperwork for access to SEA 00P three business days prior to requested access date.

3.5.4 The Contractors, Subcontractors, and contractor employees must have a Federal background check prior to being granted access to Washington Navy Yard. SEA 00P will provide the SECNAV 5512/1 DEPARTMENT OF THE NAVY LOCAL POPULATION ID CARD/BASE ACCESS PASS REGISTRATION to the Contractor electronically. SEA00P will provide instruction on how to fill out the form and what identification is required for installation access.

3.5.5 Vetting of personnel can be accomplished electronically so authorization can be obtained prior to arrival.

Scanned copies of valid state driver’s license for all personnel along with current and up to date registration, and proof of insurance for company vehicles shall be provided at the visitor center on the WNY at prior to entry onto the installation.

3.6 Installation of Equipment

3.6.1 The Contractor shall prepare both entrances for installation of the seven new turnstiles ensuring electrical requirements for turnstiles are present. Building 201 first floor Rotunda has historical significance.

3.6.2 The Contractor shall not drill into or otherwise damage the floor, foundation, or walls with exception of utilizing already present electrical resources currently in operations.

3.6.3 The Contractor installers shall arrive on site and all equipment shall be installed following proper procedures to a professional standard agreed upon this contract. One day of Field Labor is 8-hours long and occurs during normal business hours (0800 – 1600) Monday through Friday. At the end of each day, debris will be removed, and hand tools removed from the job site.

3.6.4 Should coordination with other service providers be necessary/required, such as a licensed Electrician (High Voltage by Electrical Contractor only), the Contractor shall arrange for them to be on site or readily communicative at the time of installation. The supply of conduit and required voltage up to the turnstiles as well as (if applicable) a conduit to access control devices is required as a part of the site preparation. If the fire alarm is to be integrated with the new turnstiles, the Contractor shall submit request to SEA 00P 10 business days in advance to schedule with NAVSEA Facilities. Any connection to the Fire Alarm will be completed by NAVSEA Facilities.

3.6.5 The Contractor shall identify the area to land the wire and test for functionality. If coordination with other service providers is necessary, such as a licensed Electrician (High Voltage by Electrical Contractor only), the Contractor shall arrange for them to be on site or readily communicative at the time of installation. The supply of conduit and 120/110VAC up to the turnstiles as well as (if applicable) a conduit to access control devices is required as a part of the site preparation.

3.7 Removal / Disposal of old turnstiles

3.7.1 The Contractor shall conduct an assessment and plan for the removal of the current four turnstiles at the Alleyway entrance to include disposal. In order to accomplish the work of this contract, the contractor shall remove existing LENEL card readers from the four turnstiles followed by the removal of the turnstiles.

3.7.2 The Contractor shall be responsible for the disposal of the old turnstiles.

3.8 Testing / Training and Final Acceptance

3.8.1 The Contractor shall conduct functionality testing and end-user training. At which time the equipment and related hardware have been installed and relevant wiring has been completed as is acceptable, activation and verification of proper operability of the equipment can be performed.

3.8.2 Equipment Manuals and Operation Instructions shall be provided and if necessary, training for the End User (Owner and or Operator) shall be administered regarding the maintenance and programming capabilities of the equipment.

3.8.3 Upon Final Acceptance by NAVSEA 00P, the Contractor shall sign Installer documents and at that time manufacturer warranty on the product begins.

a. TURNSTILES

Contractor shall procure and install seven (7) ADA and LENEL compliant Linear Bar Waist High Turnstiles in Bldg. 201 first floor entrances on the Washington Navy Yard, Washington DC, consisting of the items listed below and all cabling, programming and miscellaneous items needed for the installation:

4. APPLICABLE DOCUMENTS

SECNAVINST

5500.35 DEPARTMENT OF THE NAVY PHYSICAL SECURITY

PROGRAM

22 Feb 2022

5. REQUIREMENTS

5.1.1 The Contractor shall, for operational purposes, and access into building 201, provide SEA 00P a detailed two-phase plan commencing with the River Entrance execution plan and once completed and operationally accepted, will then move to the Alleyway entrance for execution.

5.1.2The two-phase plan will allow for daily access without restricting employees or having them funnel through a work zone. Safety of all personnel is paramount during all phases of operations.

5.2.3 The Contractor shall notify SEA 00P of any safety concerns or situations.

5.2.4 The Contractor shall follow all Occupational Safety and Health Administration (OSHA) standards and training.

5.2.5 The Contractor shall complete any safety training provided by SEA 00P required by US Naval Instructions prior to starting any operations.

PART # DESCRIPTION QTY

WAIST HIGH TURNSTILE WIDTH 36" ADA LINEAR BAR 7

GEOMETRICALLY LOCKING SUPERIOR NO-WEARING GEOMETRICK

LOCKING ENTER/EXIT

ON BOARD BATTERY BACK UP 7

ADJACENT METALLIC PANEL 4

SOILD SURFACE CARD IN/CARD OUT 14

PLATFORM SYSTEM LOW PROFILE PLATFORM 7

CABLE COVER 2X2 INVERTED C-CHANNEL OF MATCHING 2

OPERATION PLC PROGRAMMING 7

PLC-OPTION ALARM OUT KIT 7

AREOCABLE 5

THREE LANE REMOTE OPERATION 1

FOUR LANE REMOTE OPERATION 1

DUAL READER INTERFACE 3

STAR MULTIPLEXER 1

18-02 OAS STR 600

22-06 OAS STR 600

RACEWAY EQUIPMENT (FOR EXPOSED WIRING, CABLES, JUNCTIONS,

ETC…)

5.2.6 The Contractor’s office and operations shall be within 50 miles of Washington Navy Yard, D.C., zip code 20376.

6. DELIVERABLES

Number Name

A001 ENGINEERING DOCUMENTATION PRODUCT DRAWINGS – CAD DRAWINGS, AS

BUILT

(End of text)

CLAUSES INCORPORATED BY FULL TEXT

C-202-H001 ADDITIONAL DEFINITIONS–BASIC (NAVSEA) (OCT 2018)

(a) Department - means the Department of the Navy.

(b) Commander, Naval Sea Systems Command - means the Commander of the Naval Sea Systems Command of the Department of the Navy or his duly appointed successor.

(c) References to The Federal Acquisition Regulation (FAR) - All references to the FAR in this contract shall be deemed to also reference the appropriate sections of the Defense FAR Supplement (DFARS), unless clearly indicated otherwise.

(d) National Stock Numbers - Whenever the term Federal Item Identification Number and its acronym FIIN or the term Federal Stock Number and its acronym FSN appear in the contract, order or their cited specifications and standards, the terms and acronyms shall be interpreted as National Item Identification Number (NIIN) and National Stock Number (NSN) respectively which shall be defined as follows:

(1) National Item Identification Number (NIIN). The number assigned to each approved Item Identification under the Federal Cataloging Program. It consists of nine numeric characters, the first two of which are the National Codification Bureau (NCB) Code. The remaining positions consist of a seven digit non-significant number.

(2) National Stock Number (NSN). The National Stock Number (NSN) for an item of supply consists of the applicable four-position Federal Supply Class (FSC) plus the applicable nine-position NIIN assigned to the item of supply.

C-204-H001 USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL CONTRACT FILES (NAVSEA)

(OCT 2018)

(a) NAVSEA may use a file room management support contractor, hereinafter referred to as "the support contractor", to manage its file room, in which all official contract files, including the official file supporting this procurement, are retained. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as “protected information”. File room management services consist of any of the following: secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper-based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein.

(b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file room management services are acquired will contain a requirement that:

(1) The support contractor not disclose any information;

(2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files;

(3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and,

(4) In addition to any other rights the contractor may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed protected information, for the unauthorized duplication, release, or disclosure of such protected information.

(c) Execution of this contract by the contractor is considered consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file room management support contractor for the limited purpose of executing its file room support contract responsibilities.

(d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Contractors should enter into separate non-disclosure agreements with the file room contractor. Contact the Procuring Contracting Officer for contractor specifics. However, any such agreement will not be considered a prerequisite before information submitted is stored in the file room or otherwise encumber the government.

C-211-H018 APPROVAL BY THE GOVERNMENT (NAVSEA) (JAN 2019)

Approval by the Government as required under this contract and applicable specifications shall not relieve the Contractor of its obligation to comply with the specifications and with all other requirements of the contract, nor shall it impose upon the Government any liability it would not have had in the absence of such approval.

C-227-H006 DATA REQUIREMENTS (NAVSEA) (OCT 2018)

The data to be furnished hereunder shall be prepared in accordance with the Contract Data Requirements List, DD Form 1423, Exhibit(s) A, attached hereto.

(End of Text)

C-246-H001 EXTENSION OF COMMERCIAL WARRANTY (NAVSEA) (OCT 2018)

The Contractor shall extend to the Government the full coverage of any standard commercial warranty normally offered in a similar commercial sale, provided that such warranty is available at no additional cost to the Government. The Contractor shall provide a copy of the standard commercial warranty with the item. The standard commercial warranty period shall begin upon the final acceptance of the applicable material or software.

Acceptance of the standard commercial warranty does not waive the Government's rights under the "Inspection" clause, nor does it limit the Government's rights with regard to other terms and conditions of the contract. In the event of a conflict, the terms and conditions of the contract shall take precedence over the standard commercial warranty.

C-247-H001 PERMITS AND RESPONSIBILITIES (NAVSEA) (DEC 2018)

The Contractor shall, without additional expense to the Government, be responsible for obtaining any necessary licenses and permits for complying with any applicable Federal, State, and Municipal laws, codes, and regulations for shipping and transportation including, but not limited to, any movement over public highways of overweight/over dimensional materials.

Section D - Packaging and Marking

D-211-H001 PACKAGING OF DATA (NAVSEA) (FEB 2022)

Data to be delivered by Integrated Digital Environment (IDE) or other electronic media shall be as specified in the contract.

All unclassified data to be shipped shall be prepared for shipment in accordance with best commercial practice.

Classified reports, data, and documentation shall be prepared for shipment in accordance with National Industrial Security Program Operating Manual (NISPOM), 32 CFR Part 117.

D-211-H004 IDENTIFICATION MARKING OF PARTS--BASIC (NAVSEA) (OCT 2018)

For all parts not subject to the marking requirements in DFARS 252.211-7003 – Item Unique Identification and Valuation, marking shall be accomplished in accordance with the following:

(1) Parts shall be marked in accordance with generally accepted commercial practice.

(2) In cases where parts are so small as not to permit identification marking as provided above, such parts shall be appropriately coded so as to permit ready identification.

D-246-H002 WARRANTY NOTIFICATION FOR ITEM(S) 0001-0017—BASIC (NAVSEA) (OCT 2018)

The Contractor shall apply a permanent warranty notification stamping or marking on each warranted deliverable end item and its container. The notification shall be placed in close proximity to other required stamping or markings so as to be easily readable by personnel. The warranty notification shall read:

THIS ITEM WARRANTED UNDER CONTRACT ____TBD____ TO CONFORM TO DESIGN,

MANUFACTURING, AND PERFORMANCE REQUIREMENTS AND BE FREE FROM DEFECTS IN

MATERIAL AND WORKMANSHIP FOR _______TBD_________ FROM DATE OF ACCEPTANCE.

IF ITEM IS DEFECTIVE NOTIFY __________TBD_____________ AND PCO.

D-247-H002 PACKAGING OF SUPPLIES—BASIC (NAVSEA) (DEC 2020)

Item(s) 0001-0017 The supplies furnished hereunder shall be packaged in accordance with ASTM-D-3951-18, Standard Practice for Commercial Packing.

D-247-H004 MARKING AND PACKING LIST(S) – BASIC (NAVSEA) (FEB 2022)

(a) Marking. Shipments, shipping containers and palletized unit loads shall be marked in accordance with ASTM- D-3951-18 approved 1 May 2018, Standard Practice for Commercial Packing.

(b) Packing List(s). A packing list (DD Form 250 Material Inspection and Receiving Report may be used) identifying the contents of each shipment, shipping container or palletized unit load shall be provided by the Contractor with each shipment. When a contract line item identified under a single stock number includes an assortment of related items such as kit or set components, detached parts or accessories, installation hardware or material, the packing list(s) shall identify the assorted items. Where assortment of related items is included in the shipping container, a packing list identifying the contents shall be furnished.

(c) Master Packing List. In addition to the requirements in paragraph (b) above, a master packing list shall be prepared where more than one shipment, shipping container or palletized unit load comprise the contract line item being shipped. The master packing list shall be attached to the number one container and so identified.

(d) Part Identification. All items within the kit, set, installation hardware or material shall be suitably segregated and identified within the unit pack(s) or shipping container by part number and/or national stock number.

D-247-W001 PROHIBITED PACKING MATERIALS (NAVSEA) (OCT 2018)

The use of asbestos, excelsior, newspaper or shredded paper (all types including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited. In addition, the use of yellow wrapping or packaging material is prohibited except where used for the containment of radioactive material. Loose fill polystyrene is prohibited for shipboard use.

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government

CLAUSES INCORPORATED BY REFERENCE

52.246-2 Inspection Of Supplies--Fixed Price AUG 1996 52.246-16 Responsibility For Supplies APR 1984

E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018)

Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423.

E-246-H022 INSPECTION AND TEST RECORDS (NAVSEA) (JAN 2019)

Inspection and test records shall, as a minimum, indicate the nature of the observations, number of observations made, and the number and type of deficiencies found. Data included in inspection and test records shall be complete and accurate, and shall be used for trend analysis and to assess corrective action and effectiveness. The data shall, on request, be identified and made available for on-site review by the Contracting Officer or designated Government representative.

E-246-W002 CERTIFICATE OF COMPLIANCE (NAVSEA) (OCT 2018)

(a) A certification of material shall be provided by the Contractor, one (1) copy to accompany the shipment (in the packing list envelope) and (l) copy mailed to arrive at time of receipt of the shipment. Mark all certificates to the attention of Code 00Q.

(b) The certificate shall state compliance of material with drawing specification and contract/order requirements. The certificate shall as a minimum state the company name, contract/order number, drawing or specification number, and date. The certificate shall state, above the signature of a legally authorized representative of the company, the following:

This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States Code, Section 1001.

(c) Failure to provide certification at the time of shipment may result in material being rejected and returned at the contractor's expense.

(d) The certificate shall read as follows:

I certify that on ______ [insert date], the ____ [insert Contractor’s name] furnished the supplies called for by the Order/Contract No._____ via ____ [Carrier] on ________ [identify the bill of lading or shipping document] in accordance with all applicable requirements. I further certify that the supplies or services are of the quality specified and conform in all respects with the contract requirements, including specifications, drawings, preservation, packaging, packing, marking requirements, and physical item identification (part number), and are in the quantity shown on this document.

Date of Execution: ________________________________ Signature: _______________________________________ Typed Name: ____________________________________ Title: ___________________________________________

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 30 dys. ADC 7 NAVSEA HQ

TBD

614 SICARD ST SE

BLDG 201/3E351

WASHINGTON DC 20376

TBD

FOB: Destination

N00024

0002 30 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0003 30 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0004 30 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0005 30 dys. ADC 14 (SAME AS PREVIOUS LOCATION)

0006 30 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0007 30 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0008 30 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0009 30 dys. ADC 7 (SAME AS PREVIOUS LOCATION)

0010 30 dys. ADC 5 (SAME AS PREVIOUS LOCATION)

0011 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0012 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0013 30 dys. ADC 3 (SAME AS PREVIOUS LOCATION)

0014 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0015 30 dys. ADC 600 (SAME AS PREVIOUS LOCATION)

0016 30 dys. ADC 600 (SAME AS PREVIOUS LOCATION)

0017 30 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0018 POP 30-SEP-2024 TO

31-MAR-2025

N/A (SAME AS PREVIOUS LOCATION)

0019 POP 30-SEP-2024 TO

31-MAR-2025

N/A (SAME AS PREVIOUS LOCATION)

52.242-15 Stop-Work Order AUG 1989 52.247-34 F.O.B. Destination NOV 1991

F-242-H001 CONTRACTOR NOTICE REGARDING LATE DELIVERY (NAVSEA) (OCT 2018)

In the event the contractor anticipates or encounters difficulty in complying with the contract delivery schedule or date, the contractor shall immediately notify, in writing, the Contracting Officer and the cognizant Contract Administration Services Office, if assigned. The notice shall give the pertinent details; however, such notice shall not constitute a waiver by the Government of any contract delivery schedule, or of any rights or remedies provided by law or under this contract.

F-247-H001 DELIVERY OF DATA (NAVSEA) (OCT 2018)

All data to be furnished under this contract shall be delivered prepaid to the destination(s) and at the time(s) specified on the Contract Data Requirements List(s), DD Form 1423.

Section G - Contract Administration Data

252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) Definitions. As used in this clause—

“Department of Defense Activity Address Code (DoDAAC)” is a six position code that uniquely identifies a unit, activity, or organization.

“Document type” means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

“Local processing office (LPO)” is the office responsible for payment certification when payment certification is done external to the entitlement system.

“Payment request” and “receiving report” are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232- 7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall—

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the “Web Based Training” link on the WAWF home page at https://wawf.eb.mil/.

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items—

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report (Combo) / Inspection Location: Destination/Acceptance Location: Destination

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF “combo” document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Field Name in WAWF Data to be entered in WAWF

Contract Number TBD

Delivery/Task Order Number TBD

CAGE Code TBD

Pay Official DoDAAC N0024B

Issue By DoDAAC N64267

Admin DoDAAC** N64267

Inspect By DoDAAC N/A

Ship To Code N00024

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity’s WAWF point of contact.

- For WAWF issues contact: TBD

- For vendor pay issues contact: TBD

- WAWF email notifications. The Contractor shall enter the following email address in the “Send Additional Email Notifications” field of WAWF once a document is submitted in the system:

TBD

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

G-232-H002 PAYMENT INSTRUCTIONS (NAVSEA) (FEB 2024)

Payment office allocation methods can be found in the table at DFARS PGI 204.7108(b)(2) (https://www.acq.osd.mil/dpap/dars/pgi/pgi_htm/current/PGI204_71.htm#payment_instructions).

This procurement contains the following contract type(s): FFP – Firm Fixed Price.

G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN 2019)

(a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal.

Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Should the subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer.

(b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein.

G-242-H001 Government Contract Administration Points-of-Contact and Responsibilities (NAVSEA) (OCT 2023)

(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.

(b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.

(c) The points of contact are as follows:

(i) The Procuring Contracting Officer (PCO) is:

Name: Tashell Richmond

Address: Naval Surface Warfare Center, Corona Division 1999 Fourth Street

Norco, CA 92860-3634 E-mail: tashell.a.richmond.civ@us.navy.mil

(ii) The Contract Specialist is:

Name: Mia Barela Address: Naval Surface Warfare Center, Corona Division 1999 Fourth Street

Norco, CA 92860-3634 E-mail: maria.p.barela3.civ@us.navy.mil

(d) The Technical Point of Contact (TPOC) is the contracting officer’s representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.

The Technical Point of Contact (TPOC) is:

Name: [ * ] Address: [ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]

(e) The Contractor's point of contact for performance under this contract is:

Name: [ * ] Title: [ * ] Address:

[ *Street ] [ *City, State, Zip ] Phone: (Area Code) xxx- [xxxx] E-mail: [ * ]

[ * ] To be completed at contract award

G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (JUL 2021)

(a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods.

Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the NAVSEA HQ. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor’s expense with no cost or liability to the U.S. Government.

(b) The federal Government observes public Holidays that have been established under 5 U.S.C. 6103. The actual date of observance for each of the holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link:

https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/.

(c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis.

(d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy. Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company’s established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures.

(e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance.

(f) The hours of operation for deliveries to the warehouse are as follows: Monday – Friday 8:00 am – 4:00 pm, excluding federal holidays.

G-242-W001 CONTRACT ADMINISTRATION FUNCTIONS (NAVSEA) (OCT 2018)

(a) In accordance with FAR 42.302(a) all functions listed are delegated to the ACO except the following items to be retained by the PCO: N/A

(b) In accordance with FAR 42.302(b), the following additional functions are delegated to the ACO: N/A

Section I - Contract Clauses

52.203-3 Gratuities APR 1984 52.203-12 Limitation On Payments To Influence Certain Federal

Transactions

JUN 2020

52.204-13 System for Award Management Maintenance OCT 2018 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.204-21 Basic Safeguarding of Covered Contractor Information Systems

NOV 2021

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

NOV 2023

52.229-3 Federal, State And Local Taxes FEB 2013 52.232-17 Interest MAY 2014 52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.242-13 Bankruptcy JUL 1995 52.243-1 Changes--Fixed Price AUG 1987 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.204-7000 Disclosure Of Information OCT 2016 252.204-7003 Control Of Government Personnel Work Product APR 1992 252.204-7009 Limitations on the Use or Disclosure of Third-Party

Contractor Reported Cyber Incident Information

JAN 2023

252.204-7012 (Dev) Safeguarding Covered Defense Information and Cyber Incident Reporting (DEVIATION 2024-O0013 REVISION 1)

MAY 2024

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7020 NIST SP 800-171 DoD Assessment Requirements NOV 2023 252.209-7004 Subcontracting With Firms That Are Owned or Controlled By

The Government of a Country that is a State Sponsor of Terrorism

MAY 2019

252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010 252.225-7001 Buy American and Balance of Payments Program FEB 2024 252.225-7002 Qualifying Country Sources As Subcontractors MAR 2022 252.225-7048 Export-Controlled Items JUN 2013 252.231-7000 Supplemental Cost Principles DEC 1991 252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.243-7002 Requests for Equitable Adjustment DEC 2022 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.246-7006 Warranty Tracking of Serialized Items MAR 2016 252.246-7007 Contractor Counterfeit Electronic Part Detection and

Avoidance System

JAN 2023

252.246-7008 Sources of Electronic Parts JAN 2023

252.247-7023 Transportation of Supplies by Sea JAN 2023

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAY 2024)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

X (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

___ (4) 52.203-17, Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community--see FAR 3.900(a).

X (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

___ (6) [Reserved]

___ (7) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-117, section 743 of Div.

C).

___ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (OCT 2016) (Pub.

L. 111-117, section 743 of Div. C).

X (9) 52.204-27, Prohibition on a ByteDance Covered Application (JUN 2023) (Section 102 of Division R of Pub.

L. 117-328).

___ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders--Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (DEC 2023) (Pub. L. 115-390, title II).

___ (11)(i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders--Prohibition. (DEC 2023) (Pub. L.

115-390, title II).

___ (ii) Alternate I (DEC 2023) of 52.204-30.

X (12) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

___ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 U.S.C. 2313).

____ (14) [Reserved]

____ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (OCT 2022) (15 U.S.C. 657a).

X (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (OCT 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

____ (17) [Reserved]

____ (18)(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-6.

____ (19)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

____ (ii) Alternate I (MAR 2020) of 52.219-7.

X (20) 52.219-8, Utilization of Small Business Concerns (FEB 2024) (15 U.S.C. 637(d)(2) and (3)).

____ (21)(i) 52.219-9, Small Business Subcontracting Plan (SEP 2023) (15 U.S.C. 637(d)(4)).

____ (ii) Alternate I (NOV 2016) of 52.219-9.

____ (iii) Alternate II (NOV 2016) of 52.219-9.

____ (iv) Alternate III (JUN 2020) of 52.219-9.

____ (v) Alternate IV (SEP 2023) of 52.219-9.

____ (22) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

____ (ii) Alternate I (MAR 2020) of 52.219-13.

____ (23) 52.219-14, Limitations on Subcontracting (OCT 2022) (15 U.S.C. 657s).

____ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP 2021) (15 U.S.C. 637(d)(4)(F)(i)).

____ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (FEB 2024) (15 U.S.C. 657f).

X (26) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (FEB 2024) (15 U.S.C. 632(a)(2)).

____ (ii) Alternate I (MAR 2020) of 52.219-28.

____ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women- Owned Small Business Concerns (OCT 2022) (15 U.S.C. 637(m)).

____ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (OCT 2022) (15 U.S.C. 637(m)).

____ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 U.S.C. 644(r)).

____ (30) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

X (31) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

X (32) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (FEB 2024) (E.O. 13126).

X (33) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

X (34)(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O. 11246).

____ (ii) Alternate I (FEB 1999) of 52.222-26.

X (35)(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

____ (ii) Alternate I (JUL 2014) of 52.222-35.

X (36)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

____ (ii) Alternate I (JUL 2014) of 52.222-36.

____ (37) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

X (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496).

X (39)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C.