DEVPREP 88 MSDS.pdf

MATERIAL SAFETY DATA SHEET

The information contained herein is based on data available at the time of preparation of this data sheet which ICI Paints believes to be reliable. However, no warranty is expressed or implied regarding the accuracy of this data. ICI Paints shall not be responsible for the use of this information, or of any product, method or apparatus mentioned and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment, and the health and safety of your employees and the users of this material.

Complies with OSHA hazard communication standard 29CFR1910.1200.

prepared 08/22/06 D

EVPR

EP 88

788T

IC

I Paints N orth A m erica 15885 Sprague R oad Strongsville, O hio 44136 EM

ER

G

EN

C

Y

TELEPH

O N

E N O

. (800) 545-2643

HAZARDS IDENTIFICATION (ANSI Section 3) Primary route(s) of exposure : Inhalation, skin contact, eye contact, ingestion.

Effects of overexposure :

Inhalation : Irritation of respiratory tract. Prolonged inhalation may lead to nausea, severe lung irritation or burns.

Skin contact : Irritation of skin, this material is corrosive and may cause burns on contact. Prolonged or repeated contact can cause dermatitis, severe skin irritation, severe skin irritation or burns.

Eye contact : Irritation of eyes, this material is corrosive and may cause burns on contact. Prolonged or repeated contact can cause tearing of eyes, redness of eyes, severe eye irritation, severe eye irritation or burns, corneal injury.

Ingestion : Ingestion may cause lung inflammation and damage due to aspiration of material into lungs, diarrhea, gastro-intestinal disturbances, burns of the mouth, throat, stomach.

Medical conditions aggravated by exposure : Eye, skin, respiratory disorders.

FIRST-AID MEASURES (ANSI Section 4) Inhalation : Remove to fresh air. Restore and support continued breathing. Get emergency medical attention. Have trained person give oxygen if necessary. Get medical help for any breathing difficulty.

Skin contact : Wash thoroughly with soap and water. If any product remains, gently rub petroleum jelly, vegetable or mineral/baby oil onto skin. Repeated applications may be needed. Remove contaminated clothing. Wash contaminated clothing before re-use. If irritation occurs, consult a physician.

Eye contact : Flush immediately with large amounts of water, especially under lids for at least 15 minutes. If irritation or other effects persist, obtain medical treatment.

Ingestion : If swallowed, obtain medical treatment immediately.

FIRE-FIGHTING MEASURES (ANSI Section 5) Fire extinguishing media : Dry chemical or foam water fog. Carbon dioxide. Closed containers may burst if exposed to extreme heat or fire.

Fire fighting procedures : Water may be used to cool and protect exposed containers. Firefighters should use full protective clothing, eye protection, and self-contained breathing apparatus.

Hazardous decomposition or combustion products : Carbon monoxide, carbon dioxide, oxides of sulfur, ammonia, hydrogen sulfide, hydrogen, unidentified organic compounds.

ACCIDENTAL RELEASE MEASURES (ANSI Section 6) Steps to be taken in case material is released or spilled : Comply with all applicable health and environmental regulations. Ventilate area. Use non-sparking tools. Evacuate all unnecessary personnel. Place collected material in proper container. Sweep up material. Large spills - shut off leak if safe to do so. Dike and contain spill. Pump to storage or salvage vessels. Use absorbent to pick up excess residue. Keep salvageable material and rinse water out of sewers and water courses. Small spills - use absorbent to pick up residue and dispose of properly.

HANDLING AND STORAGE (ANSI Section 7) Handling and storage : Store below 100f (38c). Keep from freezing. Avoid using in aluminum equipment above 120 f (49 c) contact with copper should be avoided. Do not store or handle in aluminum or galvanized (zinc) containers or equipment. Do not store in mild steel containers.

Other precautions : Use only with adequate ventilation. Do not take internally. Keep out of reach of children. Avoid contact with skin and eyes, and breathing of vapors. Wash hands thoroughly after handling, especially before eating or smoking. Keep containers tightly closed and upright when not in use.

EXPOSURE CONTROLS/PERSONAL PROTECTION (ANSI Section 8) Respiratory protection : Control environmental concentrations below applicable exposure standards when using this material. When respiratory protection is determined to be necessary, use a NIOSH/MSHA (Canadian z94.4) Approved elastomeric sealing- surface facepiece respirator outfitted with organic vapor cartridges and paint spray (dust/mist) prefilters. Determine the proper level of protection by conducting appropriate air monitoring. Consult 29CFR1910.134 For selection of respirators (Canadian z94.4).

Ventilation : Provide dilution ventilation or local exhaust to prevent build-up of vapors.

Personal protective equipment : Eye wash, safety shower, safety glasses or goggles. Impervious gloves, impervious clothing, face shield, boots.

STABILITY AND REACTIVITY (ANSI Section 10) Under normal conditions : Stable see section 5 fire fighting measures Materials to avoid : Oxidizers, acids.

Conditions to avoid : Elevated temperatures, contact with oxidizing agent, freezing.

Hazardous polymerization : Will not occur

TOXICOLOGICAL INFORMATION (ANSI Section 11) Supplemental health information : Contains a chemical that is moderately toxic by ingestion. This material is corrosive; avoid contact. Contains a chemical that may be absorbed through skin.

Carcinogenicity : Traces of free ethylene oxide (cas #75-21-8) of up to 6 ppm may be present in this product and could accumulate in the headspace of storage and transport vessels. The trace amounts of ethylene oxide are not expected to result in either acute or long-term hazards when handled according to the recommendations herein. However, ethylene oxide is a cancer hazard and a reproductive hazard. Repeated exposure to ethylene oxide may be harmful.

Reproductive effects : No reproductive effects are anticipated Mutagenicity : No mutagenic effects are anticipated Teratogenicity : No teratogenic effects are anticipated

ECOLOGICAL INFORMATION (ANSI Section 12) No ecological testing has been done by ICI paints on this product as a whole.

DISPOSAL CONSIDERATIONS (ANSI Section 13) Waste disposal : Dispose in accordance with all applicable regulations. Avoid discharge to natural waters.

REGULATORY INFORMATION (ANSI Section 15) As of the date of this MSDS, all of the components in this product are listed (or are otherwise exempt from listing) on the TSCA inventory. This product has been classified in accordance with the hazard criteria of the CPR (controlled products regulations) and the MSDS contains all the information required by the CPR.

Form: 788T, Page 2 of 2, prepared 08/22/06

Physical Data (ANSI Sections 1, 9, and 14)

Product Code Description Wt. / Gal. VOC

gr. / ltr.

% Volatile by Volume

Flash Point

Boiling Range HMIS DOT, proper shipping name

788T0000 devprep 88 heavy duty cleaner 8.62 3.05 93.90 n/a 212-212 310 paint related material

Ingredients Product Codes with % by Weight (ANSI Section 2)

Chemical Name Common Name CAS. No. 788T0000 benzenesulfonic acid, dimethyl-, sodium salt sodium xylene sulfonate liquid 1300-72-7 1-5 glycine, n,n'-1,2-ethanediylbisõn- (carboxymethyl)-, tetrasodium salt chelating agent 64-02-8 1-5 sodium metasilicate pentahydrate sodium metasilicate pentahydrate 6834-92-0 1-5 alcohols, c9-11, ethoxylated detergent range alcohol ethoxylate 68439-46-3 1-5 water water 7732-18-5 80-90

Chemical Hazard Data (ANSI Sections 2, 8, 11, and 15)

ACGIH-TLV OSHA-PEL S.R.

Std. S2 S3 CCCommon Name CAS. No. 8-Hour TWA STEL C S 8-Hour TWA STEL C S H M N I O sodium xylene sulfonate liquid 1300-72-7 not est. not est. not est. not est. not est. not est. not est. not est. not est. n n n n n n n n chelating agent 64-02-8 not est. not est. not est. not est. not est. not est. not est. not est. not est. n n n n n n n n sodium metasilicate pentahydrate 6834-92-0 not est. not est. not est. not est. not est. not est. not est. not est. not est. n n n n n n n n detergent range alcohol ethoxylate 68439-46-3 not est. not est. not est. not est. not est. not est. not est. not est. not est. n n n n n n n n

Footnotes: H=Hazardous Air Pollutant, M=Marine Pollutant C=Ceiling - Concentration that S=Skin - Additional exposure, n/a=not applicable ppm=parts per million S2=Sara Section 302 EHS P=Pollutant, S=Severe Pollutant should not be exceeded, over and above airborn exposure, not est=not established mg/m3=milligrams per cubic meter S3=Sara Section 313 Chemical Carcinogenicity Listed By:

even instantaneously. may result from skin absorption. CC=CERCLA Chemical Sup Conf=Supplier Confidential S.R.Std.=Supplier Recommended Standard N=NTP, I=IARC, O=OSHA, y=yes, n=no