DB Wage Rates.pdf
PDF 68 KB Posted
- Solicitation number
- 697DCK-25-R-00441
About this file
This document is a Davis-Bacon wage determination for building construction projects in Bergen County, New Jersey, effective for 2025. The wage determination establishes minimum hourly rates for various construction trades and classifications, including asbestos workers, bricklayers, carpenters, electricians, engineers, ironworkers, laborers, painters, plumbers, and truck drivers. Key wage details include:
For contracts entered on or after January 30, 2022, workers must be paid at least $17.75 per hour under Executive Order 14026, while contracts awarded between January 1, 2015 and January 29, 2022 require a minimum of $13.30 per hour under Executive Order 13658. The document provides detailed wage rates for over 20 different construction job classifications, with hourly rates ranging from $28.37 for asbestos removal laborers to $73.59 for cable splicer electricians. Additional pay provisions include higher rates for hazardous waste work, work at significant heights, and specialized tasks like welding or working with specific equipment.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
"General Decision Number: NJ20250026 05/23/2025
Superseded General Decision Number: NJ20240026
State: New Jersey
Construction Type: Building
County: Bergen County in New Jersey.
BUILDING CONSTRUCTION PROJECTS (does not include single family homes or apartments up to and including 4 stories).
Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.
Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(1).
|If the contract is entered |. Executive Order 14026 | |into on or after January 30, | generally applies to the | |2022, or the contract is | contract. | |renewed or extended (e.g., an |. The contractor must pay | |option is exercised) on or | all covered workers at | |after January 30, 2022: | least $17.75 per hour (or | | | the applicable wage rate | | | listed on this wage | | | determination, if it is | | | higher) for all hours | | | spent performing on the | | | contract in 2025. | |If the contract was awarded on|. Executive Order 13658 | |or between January 1, 2015 and| generally applies to the | |January 29, 2022, and the | contract. | |contract is not renewed or |. The contractor must pay all| |extended on or after January | covered workers at least | |30, 2022: | $13.30 per hour (or the | | | applicable wage rate listed| | | on this wage determination,| | | if it is higher) for all | | | hours spent performing on | | | that contract in 2025. |
The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.
Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.
Modification Number Publication Date 0 01/03/2025 1 03/14/2025
7/31/25, 8:33 AM SAM.gov https://sam.gov/wage-determination/NJ20250026/3 1/10
2 03/21/2025 3 05/23/2025
ASBE0032-008 09/19/2024
Rates Fringes
ASBESTOS WORKER/HEAT & FROST
INSULATOR (Includes the application of all insulating materials, protective coverings, coatings and finishings to all types of mechanical systems; also, the application of firestopping material to openings and penetrations in walls, floors, ceilings and curtain walls; also, all lead abatement).......................$ 51.74 46.20
BRNJ0002-014 11/01/2022
Rates Fringes
BRICKLAYER (Including Caulking, Cleaning and Pointing)........................$ 46.90 34.31
Work on high stacks: 22% per hour additional.
BRNJ0002-016 11/01/2022
Rates Fringes
MASON - STONE....................$ 46.90 34.31
Work on high stacks: 22% per hour additional.
BRNJ0004-001 11/01/2022
Rates Fringes
CEMENT MASON.....................$ 46.90 34.31
BRNJ0007-003 07/04/2022
Rates Fringes
Marble setter...................$ 62.40 38.82
BRNJ0007-022 06/06/2022
Rates Fringes
Tile finisher..................$ 47.60 32.11 Tile setter....................$ 62.01 35.28
Tile finisher:
Work grouting all epoxy: $10.00 additional per day.
* CARP0006-009 05/01/2025
Rates Fringes https://sam.gov/wage-determination/NJ20250026/3 2/10
CARPENTER (Scaffold Builder).....$ 57.42 59.25%+$0.15
The first sixty feet at the regular rate, 10% per hour additional for each additional fifty feet thereafter.
* CARP0006-010 05/01/2025
Rates Fringes
CARPENTER
Including Acoustical Ceiling Installation, Drywall Hanging, Formwork, Batt and Blown Insulation...$ 57.42 59.25%+$0.15
* CARP0029-008 05/01/2025
Rates Fringes
Soft floor layer...............$ 57.42 59.25%+$0.15
* CARP0715-007 05/01/2025
Rates Fringes
Millwright.....................$ 58.84 59.25%+0.20
Work of erection and dismantling of elevators and towers, such as concrete conveyors and temporary material elevators, scaffolding or other structures to be used as scaffolding inside or outside of buildings: the first sixty feet at the regular rate, 10% per hour additional for each additional fifty feet thereafter.
ELEC0164-006 06/03/2024
Rates Fringes
ELECTRICIAN (Including Low Voltage Wiring) Cable splicer...............$ 73.59 62.5% Electrician.................$ 62.90 62.5%
Work on line voltage of 440 or 480 volts: 10% per hour additional.
Work from trusses, scaffolds, frames, ladders and poles, 40
ft. or more above the ground or floor (does not include work from a manlift): 20% per hour additional.
Work on radio towers, transmission towers and smokestacks:
21% per hour additional.
ENGI0825-020 07/01/2024
Rates Fringes
Power equipment operators:
GROUP 1.....................$ 60.47 36.25
GROUP 2.....................$ 58.88 36.25
GROUP 3.....................$ 56.97 36.25
https://sam.gov/wage-determination/NJ20250026/3 3/10
GROUP 4.....................$ 55.34 36.25
GROUP 5.....................$ 51.63 36.25
Hazardous waste removal work:
Work on a state or federally designated hazardous waste site, where the worker is in direct contact with hazardous material, and when personal protective equipment is required for respiratory, skin and eye protection: 20% per hour additional.
PAID HOLIDAYS:
New Year's Day, Washington's Birthday observed, Memorial Day, Independence Day, Labor Day, Presidential Election Day, Veteran's Day, Thanksgiving Day and Christmas Day; provided
1) that the worker works three of the preceding five work days before the holiday; or, the work day before the holiday and the work day after the holiday; and, 2) that the worker works the work day before and the work day after the holiday.
DEFINITION OF GROUPS:
GROUP 1:
Backhoe, Including Backhoe Track; Boom; Concrete Paving Machine; Crane (all types, including overhead and straddle traveling type); Drill (down-the-hole drill, rotary drill, self-propelled hydraulic drill, self-powered drill);
Elevating Grader; Excavator; Front End Loader (5 cu. yd.
and over); Piledriver (length of boom, including length of leads, shall determine premium rate applicable); Trencher
GROUP 2:
Backhoe Loader Combo; Concrete Pumper; Grader/Blade (Finish);
Hoist; Hydraulic Crane, 10 Tons and under; Front End Loader (2 cu. yd. but less than 5 cu. yd.); Scraper; Side Boom
GROUP 3:
Asphalt Spreader; Bulldozer;Compressor(2 or 3) (in Battery) (within 100 ft.); Forklift; Front End Loader (1 cu. yd.
and over but less than 2 cu. yd.); Lull; Mechanic; Paver, Asphalt; Roller, Blacktop; Tractor;
GROUP 4:
Bobcat/Skid Loader; Compressor (Single); Farm Tractor; Front End Loader (under 1 cu. yd.); Hydroseeder; Roller, Grade;
Pump, Hydraulic
GROUP 5:
Oiler
IRON0011-012 07/01/2024
Rates Fringes
Ironworkers:
Reinforcing.................$ 48.44 49.37 Structural, Ornamental......$ 50.74 49.37
LABO0008-001 05/01/2011
Rates Fringes https://sam.gov/wage-determination/NJ20250026/3 4/10
Asbestos Removal Laborer.........$ 28.37 21.62
The removal, abatement, enclosure and decontamination of personal protective equipment, chemical protective clothing and machinery relating to asbestos and/or toxic and hazardous waste or materials which shall include but not necessarily be limited to: the erection, moving, servicing and dismantling of all enclosures, scaffolding and barricades; the operation of all tools and equipment normally used in the removal or abatement of asbestos and toxic or hazardous waste or materials; the labeling, bagging, cartoning, crating, or other packaging of materials for disposal; the clean-up of the worksite; and all other work incidental to the removal, abatement, encapsulation, enclosure, and decontamination of asbestos and toxic or hazardous waste or materials; and, in addition, all work tasks involved in the maintenance and operation of energy resource recovery plants (co-generation plants)
LABO0077-002 05/01/2022
Rates Fringes
LABORER
MASON TENDER:
Brick/Cement/Concrete.......$ 36.50 30.22
LABO0077-006 05/01/2022
Rates Fringes
Laborers:
Asphalt Shoveler, Asphalt Spreader, Common or General Laborer, Landscape Laborer, Power Tool Operator and Screedman......$ 35.75 30.22
PAIN0711-018 05/01/2024
Rates Fringes
DRYWALL FINISHER/TAPER...........$ 43.41 29.86
PAIN0711-019 05/01/2017
Rates Fringes
PAINTER (Brush & Roller).........$ 39.25 22.66 PAINTER (Spray)..................$ 40.28 19.98
PAIN0711-021 05/01/2024
Rates Fringes
Glazier........................$ 51.43 12%+24.54
Work welding or using a cutting torch:
$1.00 per hour additional.
Work on a swing stage scaffold; on a pipe scaffold providing the working height of the platform is 30 ft. or above; and https://sam.gov/wage-determination/NJ20250026/3 5/10 on motorized lifts provided that the height of the lift platform is above the second floor or above thirty feet:
$1.00 per hour additional.
PLAS0029-003 05/01/2024
Rates Fringes
PLASTERER........................$ 54.64 30.95
* PLUM0024-001 05/01/2025
Rates Fringes
PLUMBER (Excluding HVAC Pipe Installation)....................$ 62.09 45.05
PLUM0274-003 05/01/2022
Rates Fringes
PIPEFITTER (Including HVAC Pipe Installation)...............$ 57.97 40.22
ROOF0010-003 06/01/2024
Rates Fringes
ROOFER (Includes All Types of Roofs)...........................$ 45.40 29.14
SFNJ0696-006 01/01/2025
Rates Fringes
SPRINKLER FITTER (Fire Sprinklers)......................$ 67.97 39.35
SHEE0025-005 06/01/2024
Rates Fringes
SHEET METAL WORKER (Including HVAC Duct Installation)..........$ 51.30 51.55
* TEAM0560-002 05/01/2025
Rates Fringes
TRUCK DRIVER
Dump Truck..................$ 47.36 44.02 Off the Road Truck..........$ 47.51 44.02
Hazardous waste removal work:
Work on a state or federally designated hazardous waste site, where the worker is in direct contact with hazardous material, and when personal protective equipment is required for respiratory, skin and eye protection: $3.00 per hour additional.
Work on a state or federally designated hazardous waste site, in a zone requiring Level A personal protection for any workers other than the truck driver: $3.00 per hour https://sam.gov/wage-determination/NJ20250026/3 6/10 additional.
Work on a state or federally designated hazardous waste site, in a zone requiring Level B, C or D personal protection for any workers other than the truck driver:
$1.00 per hour additional.
PAID HOLIDAYS:
New Year's Day, President's Day, Decoration Day, Independence Day, Labor Day, Presidential Election Day, Veteran's Day, Thanksgiving Day and Christmas Day; provided that the employee has been assigned to work, or, ""shapes"", one day of the calendar week during which the holiday occurs.
DEFINITION OF GROUPS:
GROUP 1:
Driver of the following types of vehicle: dump; flat;
float; pick-up; container hauler; fuel; water sprinkler;
road oil; stringer bead; hot pass; bus; dumpcrete; transit mixer; agitator mixer; half track; winch truck;
side-o-matic; dynamite; powder; x-ray; welding; skid; jeep;
station wagon; stringer; A-frame; dual-purpose truck; truck with mechanical tailgate; asphalt distributor; batch truck;
seeding; mulching; fertilizing; air compressor truck (in transit); parts chaser; escort; scissor; hi-lift;
telescope; concrete breaker; gin pole; stone, sand, asphalt distributor and spreader; nipper; fuel truck (driver of fuel truck including handling of hose and nozzle - entire unit); team driver; vacuum or vac-all trucks (entire unit);
skid truck (debris container - entire unit); concrete mobile truck (entire unit); beltcrete truck; pumpcrete truck; line truck; reel truck; wrecker; tow truck; utility truck; tack truck; cardex person; driver on the following types of vehicle: Broyhill coal tar epoxy truck, Littleford bituminous distributor, slurry seal truck or vehicle, thiokol track master pick-up (swamp cat pick-up); bucket loader dump truck and any rubber-tired tractor used in pulling and towing farm wagons and trailers of any description; on-site repair shop
GROUP 2:
Driver of 3-axle materials truck and float
GROUP 3:
Driver of all Euclid-type vehicles: Euclid; International Harvester; Wabco; Caterpillar; Koehring, tractor and wagon;
dumpster; dump; bottom, rear and side dump; carry-all and scraper (not self-loading, loading over the top); water sprinkler trailer; water pull and similar types of vehicle;
driver of tractor and trailer-type vehicle: flat, float, I-beam, low bed, water sprinkler, bituminous, transit mix, road oil, fuel, bottom dump hopper, rear dump, office, shanty, epoxy, asphalt, agitator mixer, mulching, stringing, seeding, fertilizing, pole, spread bituminous distributor, water pull (entire unit), tractor trailer, reel trailer, and similar types of vehicle
GROUP 4:
Winch trailer driver https://sam.gov/wage-determination/NJ20250026/3 7/10
SUNJ2004-002 01/02/2009
Rates Fringes
ELEVATOR MECHANIC................$ 40.21 11.22
LABORER: Pipelayer..............$ 38.85 0.14
WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.
Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.
Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.
Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (iii)).
The body of each wage determination lists the classifications and wage rates that have been found to be prevailing for the type(s) of construction and geographic area covered by the wage determination. The classifications are listed in alphabetical order under rate identifiers indicating whether the particular rate is a union rate (current union negotiated rate), a survey rate, a weighted union average rate, a state adopted rate, or a supplemental classification rate.
Union Rate Identifiers
A four-letter identifier beginning with characters other than ""SU"", ""UAVG"", ?SA?, or ?SC? denotes that a union rate was prevailing for that classification in the survey. Example:
PLUM0198-005 07/01/2024. PLUM is an identifier of the union whose collectively bargained rate prevailed in the survey for this classification, which in this example would be Plumbers.
0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2024 in the example, is the effective date of the most current negotiated rate.
https://sam.gov/wage-determination/NJ20250026/3 8/10
Union prevailing wage rates are updated to reflect all changes over time that are reported to WHD in the rates in the collective bargaining agreement (CBA) governing the classification.
Union Average Rate Identifiers
The UAVG identifier indicates that no single rate prevailed for those classifications, but that 100% of the data reported for the classifications reflected union rates. EXAMPLE:
UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a weighted union average rate. OH indicates the State of Ohio.
The next number, 0010 in the example, is an internal number used in producing the wage determination. The date, 01/01/2024 in the example, indicates the date the wage determination was updated to reflect the most current union average rate.
A UAVG rate will be updated once a year, usually in January, to reflect a weighted average of the current rates in the collective bargaining agreements on which the rate is based.
Survey Rate Identifiers
The ""SU"" identifier indicates that either a single non-union rate prevailed (as defined in 29 CFR 1.2) for this classification in the survey or that the rate was derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As a weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SUFL2022-007 6/27/2024. SU indicates the rate is a single non-union prevailing rate or a weighted average of survey data for that classification. FL indicates the State of Florida. 2022 is the year of the survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. The date, 6/27/2024 in the example, indicates the survey completion date for the classifications and rates under that identifier.
?SU? wage rates typically remain in effect until a new survey is conducted. However, the Wage and Hour Division (WHD) has the discretion to update such rates under 29 CFR 1.6(c)(1).
State Adopted Rate Identifiers
The ""SA"" identifier indicates that the classifications and prevailing wage rates set by a state (or local) government were adopted under 29 C.F.R 1.3(g)-(h). Example: SAME2023-007 01/03/2024. SA reflects that the rates are state adopted. ME refers to the State of Maine. 2023 is the year during which the state completed the survey on which the listed classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination.
The date, 01/03/2024 in the example, reflects the date on which the classifications and rates under the ?SA? identifier took effect under state law in the state from which the rates were adopted.
WAGE DETERMINATION APPEALS PROCESS
1) Has there been an initial decision in the matter? This can be:
https://sam.gov/wage-determination/NJ20250026/3 9/10
a) a survey underlying a wage determination
b) an existing published wage determination
c) an initial WHD letter setting forth a position on a wage determination matter
d) an initial conformance (additional classification and rate) determination
On survey related matters, initial contact, including requests for summaries of surveys, should be directed to the WHD Branch of Wage Surveys. Requests can be submitted via email to davisbaconinfo@dol.gov or by mail to:
Branch of Wage Surveys Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
Regarding any other wage determination matter such as conformance decisions, requests for initial decisions should be directed to the WHD Branch of Construction Wage Determinations.
Requests can be submitted via email to BCWD-Office@dol.gov or by mail to:
Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
2) If an initial decision has been issued, then any interested party (those affected by the action) that disagrees with the decision can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).
Requests for review and reconsideration can be submitted via email to dba.reconsideration@dol.gov or by mail to:
Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
The request should be accompanied by a full statement of the interested party's position and any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.
3) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:
Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210.
END OF GENERAL DECISION"
https://sam.gov/wage-determination/NJ20250026/3 10/10
File details come from the government source that posted it. Updated .