C04_Attachment 3 - Building 100 Photos_1232SA26Q1517.pdf

This document is a technical specification sheet and installation drawing for a passenger elevator system (Model HX-134B-1-100E) manufactured by Republic Elevators. The elevator is rated for a 4,000 lb capacity with a duty cycle suitable for simplex operation and soft start motor configuration. Key specifications include: Class C loading; 480V/3PH/60Hz power supply; 1 front and 2 rear car doors; plunger-type hydraulic jack with 5.5-inch diameter and 35-foot 9-inch travel; car guide rails with "B" 15μ rating per ASME A17.1-2016; and an I.C.C. Pixel controller with soft start operation. The estimated pressures indicate minimum working pressure of 415 PSI with spring-type buffers rated at 9,261g reaction force.

The elevator car features formed steel construction with structured steel platform and frame, complete hoistway wiring, and integrated safety systems including machine heat release at 15,280 BTU/hour and low pressure cut-off switches. Feed pipe connections utilize 2-inch Schedule 80 piping with NPT connections and a total oil requirement of 151 gallons. Additional components include an IMO pump (20-218-2 NFT), Maxtor valve (HDA-1654C-2-NPT), emergency down speed regulation at 40 feet per minute, 120-volt motor start capability, and scavenger pump operation. The hoistway includes landing system controls, alarm bell notification, rail shank and wall bracket specifications, and gravity return provisions. Installation requirements mandate proper machine room access, support systems, and compliance with ASME A17.1-2016 standards for all material specifications and structural integrity.