C04_Attachment 3 - Building 100 Photos_Rev1_9_23_2026_1232SA26Q1517.pdf

This document is a technical specification and equipment record for a commercial passenger elevator installation located at Building #1, 1636 Alisal Drive, Salinas, California.

The elevator is a simplex-operation, soft-start passenger lift with a maximum capacity of 4,500 pounds and a maximum speed of 100 feet per minute. Key specifications include: an "A" class loading rating, 480V/3PH/60Hz power supply, 4 stops with 1 front and 2 rear openings, and a plunger-type hydraulic jack system measuring 5.5 inches in diameter and 55 feet in length. The car dimensions are 3'6" wide by 3'6" deep with an overall length of 35 feet 9 inches. The system features an I.C.C. Pixel controller with door opening and car guide rail specifications. The equipment weighs approximately 3,700 pounds (carweight) with a total grossweight of 8,200 pounds. The hydraulic system operates at 1,175 PSI minimum and 413 PSI working pressure, with a 4-inch stroke buffer. Material construction consists primarily of formed steel for the platform and car frame. The installation includes ASME A17.1-2016 compliance requirements and features a Certificate of Operation issued by National Elevator Inspection Services (a Bureau Veritas Company) dated May 1, 2024, with License No. C-5375. Accompanying photographs show the elevator cab interior with decorative wall panels, mechanical room equipment, and building entrance exterior views.