B03_Construction_Wage_Rates.pdf

PDF 101 KB Posted

Attached to
WA-LWSNFH - DESIGN/BUILD NEW REPLACEMENT Federal contract opportunity
Solicitation number
140F0321Q0060
Issued by
Department of the Interior Fish and Wildlife Service

About this file

This document contains a federal wage determination and details of a related federal contract opportunity. The wage determination provides prevailing wage rates for heavy construction projects in Skamania County, Washington, including rates for occupations such as bricklayers, carpenters, electricians, equipment operators, laborers, painters and truck drivers. The related federal contract opportunity is a solicitation from the Department of the Interior Fish and Wildlife Service for the design and build of a new replacement facility at the Washington Lower Snake River National Fish Hatchery, to be completed under fixed-price terms. The solicitation number is 140F0321Q0060 and responses were due on the date listed in the document.

View the file

Other files for this federal contract opportunity

Show all 13

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

8/18/2021 SAM.gov https://sam.gov/wage-determination/WA20210074/2 1/11

"General Decision Number: WA20210074 02/12/2021

Superseded General Decision Number: WA20200074

State: Washington

Construction Type: Heavy including water and sewer line construction

County: Skamania County in Washington.

HEAVY CONSTRUCTION PROJECTS (including sewer/water construction).

Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.95 for calendar year 2021 applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.95 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2021. If this contract is covered by the EO and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must pay workers in that classification at least the wage rate determined through the conformance process set forth in 29 CFR 5.5(a)(1)(ii) (or the EO minimum wage rate,if it is higher than the conformed wage rate). The EO minimum wage rate will be adjusted annually. Please note that this EO applies to the above-mentioned types of contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but it does not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60). Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 01/01/2021 1 01/22/2021 2 02/12/2021

BRWA0001-009 06/01/2017

Rates Fringes https://sam.gov/wage-determination/WA20210074/2 2/11

BRICKLAYER.......................$ 32.23 14.54

CARP0003-017 06/01/2019

Rates Fringes

CARPENTER (Including Form Work)............................$ 40.32 16.87

PILEDRIVERMAN....................$ 41.44 16.87

Zone Differential (Add to Zone 1 rates):

Zone 2 - $0.85 Zone 3 - 1.25 Zone 4 - 1.70 Zone 5 - 2.00 Zone 6 - 3.00

BASEPOINTS: GOLDENDALE, LONGVIEW, AND VANCOUVER

ZONE 1: Projects located within 30 miles of the respective city hall of the above mentioned cities

ZONE 2: Projects located more than 30 miles and less than 40 miles of the respective city of the above mentioned cities

ZONE 3: Projects located more than 40 miles and less than 50 miles of the respective city of the above mentioned cities

ZONE 4: Projects located more than 50 miles and less than 60 miles of the respective city of the above mentioned cities.

ZONE 5: Projects located more than 60 miles and less than 70 miles of the respective city of the above mentioned cities

ZONE 6: Projects located more than 70 miles of the respected city of the above mentioned cities

* ELEC0048-014 01/01/2021

Rates Fringes

ELECTRICIAN......................$ 50.35 25.48

HOURLY ZONE PAY:

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following https://sam.gov/wage-determination/WA20210074/2 3/11 listed cities:

Portland, The Dalles, Hood River, Tillamook, Seaside and Astoria

Zone Pay:

Zone 1: 31-50 miles $1.50/hour Zone 2: 51-70 miles $3.50/hour Zone 3: 71-90 miles $5.50/hour Zone 4: Beyond 90 miles $9.00/hour

*These are not miles driven. Zones are based on Delorrne Street Atlas USA 2006 plus.

ELEC0077-001 02/01/2019

Rates Fringes

Line Construction:

LINEMEN.....................$ 52.76 19.42

ENGI0701-016 01/01/2018

Rates Fringes

POWER EQUIPMENT OPERATOR

GROUP 4.....................$ 37.51 14.35

GROUP 5.....................$ 36.27 14.35

GROUP 6.....................$ 33.05 14.35

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

GROUP 4: TRACKHOE-ROBOTIC: up to and including 20,0000 lbs.

with any or all attachments; DRILLING: Churm Drill and Earth Boring Machine Operator; Directional Drill Operator over 20,000 lbs pullback; CRANE: Chicago boom and similar types; Boom type lifting device, 5 ton capacity or less;

Paver; Piledriver; Scraper; Screed

GROUP 5: TRACKHOE-HYDRAULIC: up to and including 20,000 lbs.;

Boom truck operator; DRILLING: Churm Drill and Earth Boring Machine Operator; Directional Drill Operator less than 20,000 lbs pullback;

GROUP 6: Oiler; Roller (Subgrade); Drill Assistant

Zone Differential (add to Zone 1 rates):

Zone 2 - $3.00 https://sam.gov/wage-determination/WA20210074/2 4/11

Zone 3 - $6.00

For the following metropolitan counties: MULTNOMAH;

CLACKAMAS; MARION; WASHINGTON; YAMHILL; AND COLUMBIA;

CLARK; AND COWLITZ COUNTY, WASHINGTON WITH MODIFICATIONS AS

INDICATED:

All jobs or projects located in Multnomah, Clackamas and Marion Counties, West of the western boundary of Mt. Hood National Forest and West of Mile Post 30 on Interstate 84 and West of Mile Post 30 on State Highway 26 and West of Mile Post 30 on Highway 22 and all jobs or projects located in Yamhill County, Washington County and Columbia County and all jobs or porjects located in Clark & Cowlitz County, Washington except that portion of Cowlitz County in the Mt.

St. Helens ""Blast Zone"" shall receive Zone I pay for all classifications.

All jobs or projects located in the area outside the identified boundary above, but less than 50 miles from the Portland City Hall shall receive Zone II pay for all classifications.

All jobs or projects located more than 50 miles from the Portland City Hall, but outside the identified border above, shall receive Zone III pay for all classifications.

For the following cities: ALBANY; BEND; COOS BAY; EUGENE;

GRANTS PASS; KLAMATH FALLS; MEDFORD; ROSEBURG

All jobs or projects located within 30 miles of the respective city hall of the above mentioned cities shall receive Zone I pay for all classifications.

All jobs or projects located more than 30 miles and less than 50 miles from the respective city hall of the above mentioned cities shall receive Zone II pay for all classifications.

All jobs or projects located more than 50 miles from the respective city hall of the above mentioned cities shall receive Zone III pay for all classifications.

IRON0029-010 07/01/2020

Rates Fringes

IRONWORKER (Reinforcing, https://sam.gov/wage-determination/WA20210074/2 5/11

Structural and Ornamental).......$ 39.10 29.75

LABO0335-011 06/01/2020

Rates Fringes

LABORER (Mason Tender-Brick, Cement/Concrete).................$ 34.93 12.44

LABO0335-017 06/01/2020

Rates Fringes

Laborers:

ZONE 1:

GROUP 1....................$ 34.93 12.44

GROUP 2....................$ 35.65 12.44

GROUP 4....................$ 36.66 12.44

GROUP 5....................$ 31.93 12.44

LABORERS CLASSIFICATIONS

GROUP 1: Form-Stripping

GROUP 2: Handheld Drill

GROUP 4: Grade Checker

GROUP 5: Flaggers

ZONE DIFFERENTIAL (Add to Zone Rates): ZONE 2 - $0.65

ZONE 3 - 1.15

ZONE 4 - 1.70

ZONE 5 - 2.75

ZONE 1: Projects within 30 miles of the respective city hall.

ZONE 2: More than 30 miles but less than 40 miles from the respective city hall.

ZONE 3: More than 40 miles but less than 50 miles from the respective city hall.

ZONE 4: More than 50 miles but less than 80 miles from the respective city hall.

ZONE 5: More than 80 miles from the respective city hall.

https://sam.gov/wage-determination/WA20210074/2 6/11

BASE POINTS: LONGVIEW AND VANCOUVER

PAIN0055-017 07/01/2019

Rates Fringes

PAINTER

Brush, Roller...............$ 25.14 12.90 Spray.......................$ 25.14 12.90

TEAM0037-007 06/01/2020

Rates Fringes

Truck drivers:

GROUP 1.....................$ 29.33 16.40

GROUP 2.....................$ 29.46 16.40

GROUP 3.....................$ 29.60 16.40

GROUP 4.....................$ 29.89 16.40

Zone Differential (Add to Zone 1 Rates):

Zone 2 - $0.65 Zone 3 - 1.15 Zone 4 - 1.70 Zone 5 - 2.75

BASE POINTS: ASTORIA, THE DALLES, LONGVIEW AND VANCOUVER

ZONE 1: Projects within 30 miles of the respective city hall.

ZONE 2: More than 30 miles but less than 40 miles from the respective city hall.

ZONE 3: More than 40 miles but less than 50 miles from the respective city hall.

ZONE 4: More than 50 miles but less than 80 miles from the respective city hall.

ZONE 5: More than 80 miles from the respective city hall.

TRUCK DRIVERS CLASSIFICATIONS

GROUP 1: Water Truck up to 3,000 gallons

GROUP 2: Semi-Trailer Truck; Water Truck over 3,000 to 5,000 gallons https://sam.gov/wage-determination/WA20210074/2 7/11

GROUP 3: Water Truck over 5,000 to 10,000 gallons

GROUP 4: Water Truck over 10,000 to 15,000 gallons

SUWA2009-065 08/07/2009

Rates Fringes

CEMENT MASON/CONCRETE FINISHER...$ 24.64 5.82

LABORER: Common or General......$ 20.60 4.53

LABORER: High Scaler............$ 21.08 6.61

LABORER: Landscape & Irrigation.......................$ 12.27 2.73

LABORER: Pipelayer..............$ 16.61 0.72

OPERATOR: Asphalt Plant.........$ 34.14 0.68

OPERATOR: Backhoe...............$ 18.03 0.00

OPERATOR: Bobcat/Skid Steer/Skid Loader................$ 10.63 0.00

OPERATOR: Broom/Sweeper.........$ 27.03 4.67

OPERATOR: Bulldozer.............$ 28.33 5.20

OPERATOR: Crane.................$ 28.00 7.43

OPERATOR: Excavator.............$ 29.43 3.60

OPERATOR: Forklift..............$ 28.17 5.97

OPERATOR: Grader/Blade..........$ 29.43 3.60

OPERATOR: Loader................$ 18.03 0.00

OPERATOR: Mechanic..............$ 28.46 6.04

OPERATOR: Power Shovel..........$ 25.12 7.83

OPERATOR: Roller................$ 28.87 3.60

TRUCK DRIVER, Includes Dump https://sam.gov/wage-determination/WA20210074/2 8/11

Truck............................$ 16.34 3.60

TRUCK DRIVER: Flatbed Truck.....$ 22.74 6.29

TRUCK DRIVER: Lowboy Truck......$ 22.89 5.72

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers https://sam.gov/wage-determination/WA20210074/2 9/11

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date https://sam.gov/wage-determination/WA20210074/2 10/11 for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.)

and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210 https://sam.gov/wage-determination/WA20210074/2 11/11

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISION"

File details come from the government source that posted it. Updated .