B01 Att J05 IHS BLACKFEET HOUSING - Submittal Book.pdf

Indian Health Service Division of Engineering Services 100% Construction Documents

Contract Number: HHSI102201800005I Task Order Number: 75H70119F30002

Professional Architect-Engineer (A-E) Services for Design for an Browning 18-Unit Apartment Building, Blackfeet Service Unit Browning, Montana

Catalog

Number

Notes

Type

LED Striplight

ZL1N

24", 48" and 96" Lengths

FEATURES & SPECIFICATIONS

INTENDED USE — Built on the compact, low-profile Z strip channel, this LED strip offers long maintenance-free life, several color temperatures, lumen outputs and lengths. Ideal for new construction and retrofit applications in T5 and T8 lengths. Ideal for uplight and downlight in commercial, retail, manufacturing, warehouse, cove and display applications. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate

Compatibility table for suitable uses.

CONSTRUCTION — Compact-design channel and cover are formed from code-gauge cold-rolled steel.

Easy to install row aligner included for continuous row mounting.

Finish: Paint options include high-gloss, baked white enamel (WH), galvanized (GALV), matte black (MB) and smoke gray (SKGY). After fabrication, five-stage iron phosphate pre-treatment ensures superior paint adhesion and rust resistance.

OPTICS — Standard diffuse snap on/snap off lens eliminates pixels, improves uniformity and minimizes glare. L/LENS option available.

ELECTRICAL — L70>60,000hours. Utilizes high-output LEDs integrated on a two-layer circuit board, ensuring cool-running operation. Optional internal pluggable wiring harness for reduced labor cost in row mounting applications. (See PLR_ ordering information on page 3.) Electronic LED driver is rated for 75 input watts maximum (see Operational Data on page two for actual wattage consumption), multi-volt input and 0-10V dimming standard. This fixture is designed to withstand a maximum line surge of 2.5kV at 0.75kA combination wave for indoor locations, for applications requiring higher level of protection additional surge protection must be provided.

LEDs provide nominal 80 CRI at 3000 K, 3500 K,4000 K, or 5000 K.

Lumen output up to 2,000 lumens per foot. In 86°F (30°C) ambient environments. Luminaire should be installed in applications where ambient temperatures do not exceed 86°F (30°C).

INSTALLATION — Tool-less channel cover for easy installation.

Fixture may be surface mounted (with or without ZSPRG hanger), pendant or stem mounted with appropriate mounting options. Three-point aligner locks in place for easy continuous row mounting.

LISTINGS — CSA certified to US and Canadian safety standards. For use in damp locations between

-40°F (-40°C) and 86°F (30°C).

DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org to confirm which versions are qualified.

WARRANTY — 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

INDUSTRIAL ZL1N

L/Lens

Lensed

Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency

• This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless control networks marked by a shaded background*

To learn more about A+, visit www.acuitybrands.com/aplus.

*See ordering tree for details

TYPE AA, AA1

ZL1N LED Striplight

INDUSTRIAL ZL1N

Notes

1 Optional. Reflectors ship separately.

2 See Operational Data on page 3 for actual lumens.

3 Not available with L24, 24" fixture. 347V and 480V utilize a step-down transformer.

4 See ordering information on page 5. When choosing sensor options and and PLR configuration, contact factory representative.

5 Not available with cordsets.

6 Not available with L24, 24" fixture. See spec sheet PS1055LCP, PS1555LCP and PS750L for more information. Emergency battery backup only available from -4 °F (-20 °C) to 86 °F (30 °C)

7 Must specify voltage. 120, 208, 240 or 277V.

8 Only available with the 8' (96") fixtures.

9 Voltage must be specified. This sensor configuration is suitable for minimum ambient temperature of 14°F (-10°C). See page 5 for low temperature option providing -4°F (-20°C) minimum ambient temperature. Sensors come prewired, they must be snapped into place at time of installation.

10 Cordsets exit back of fixture unless OUTEND option is specified.

Must specify voltage (not required when ordering CS93W).

11 Not compatible with reflector.

12 Order 2 for tandem double length fixtures (TZL1N).

Accessories: Order as separate catalog number.

HC36 Hanger chain, 36"

ZACVH Aircraft cable 10' (one pair)

ZLANGBKT Luma-tilt™ angle bracket for shelf or ledge mounting only

SQ_ Stem kit, 2" increments up to 48"

NPP16D nLight® switching/dimming module rPP20D nLight® Air switching/dimming module

LSXR Sensor Switch® LSXR occupancy sensor4

ZSPRG For 15/16" T-grid only

WGZ24 24" wireguard, white11

WGZ48 48" wireguard, white11,12

ZLR L24 SYM UPL WH 24" symmetric reflector with uplight, white finish

ZLR L24 SYM WH 24" symmetric reflector, white finish

ZLR L46 SYM UPL WH 46" symmetric reflector with uplight, white finish

ZLR L46 SYM WH 46" symmetric reflector, white finish

ZLR L48 ASY WH 48" asymmetric reflector, white finish

ZLR L48 SYM UPL WH 48" symmetric reflector with uplight, white finish

ZLR L48 SYM WH 48" symmetric reflector, white finish

ZLR L92 SYM UPL WH 92" symmetric reflector with uplight, white finish

ZLR L92 SYM WH 92" symmetric reflector, white finish

ZLR L96 SYM UPL WH 96" symmetric reflector with uplight, white finish

ZLR L96 SYM WH 96" symmetric reflector, white finish

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: ZL1N L48 3000LM FST MVOLT 40K 80CRI WH

Series Length Reflectors1 Nominal lumens2 Diffuser Voltage

ZL1N LED striplight

TZL1N LED striplight

L24 24"

L46 46"

L48 48"

L92 92"

L96 96"

(blank) Less reflector

SMR Symmetric

(blank) Less reflector

ASR Asymmetric (L48 only)

SMR Symmetric

(blank) Less reflector

SMR Symmetric

1500LM 1,500 lumens

2500LM 2,500 lumens

3500LM 3,500 lumens

3000LM 3,000 lumens

5000LM 5,000 lumens

7000LM 7,000 lumens

6000LM 6,000 lumens

10000LM 10,000 lumens

14000LM 14,000 lumens

FST Snap on frosted, diffuse

L/LENS No diffuser

SBL FST Straight blade louver with snap on frosted, diffuse

MVOLT 120-277V

120 120V

208 208V

240 240V

277 277V

347 347V 3

480 480V 3

Color temperature Color rendering index Options Paint finish

30K 3000 K

35K 3500 K

40K 4000 K

50K 5000 K

80CRI 80 CRI

90CRI 90 CRI

PLR__ Plug-in wiring4,5

PLR1LVG Plug-in wiring-low voltage4,5

E7W Emergency battery pack, 7W (not available for California)6,7

2E7W Two Emergency battery packs, 7W (not available for California)6,7,8

E10WLCP Emergency battery pack, 10W Linear Constant Power, CA Title 20 compliant6,7

2E10WLCP Two Emergency battery packs, 10W Linear Constant Power, CA Title 20 Compliant6,7, 8

E15WLCP Emergency battery pack, 15W Linear Constant Power, CA Title 20 compliant6,7,8

OUTEND Cord set to exit endplate of fixture

LBOZU 360° low mount motion sensor, pre-wired 9

LBH0SZU 360° low mount motion sensor with dimming, pre-wired 9

LBPZU 360° low mount motion sensor with photocell, pre-wired 9

LBM0SZU 360° low mount motion sensor, dimming & switching photocell, pre-wired 9

Cord sets:10

CS1W Straight plug, 120V

CS3W Twist-lock, 120V

CS7W Straight plug, 277V

CS11W Twist-lock, 277V

CS25W Twist-lock, 347V

CS97W Twist-lock, 480V

CS93W 600V SEOOW white cord, no plug (no voltage required)

WH White

GALV Galvanized

MB Matte black

SKGY Smoke gray

A+ Capable options indicated by this color background.

2-1/8 (5.4)

(122.0)

(122.0)

(244.0)

2-1/8 (5.4)

2-1/8 (5.4)

2-1/8 (5.4)

(61.0)

(61.0)

(122.0)

2-1/8 (5.4)

2-1/8 (5.4)

(30.5)

(30.5)2-1/8

(5.4)

(61.0)

2-1/8 (5.4)

2-1/8 (5.4)

2-1/8" (5.39)

2-3/16" (5.56)

2-1/8" (5.39)

2-1/8" (5.39)

ZL1N LED Striplight

INDUSTRIAL ZL1N

PHOTOMETRICS

Please see www.lithonia.com

DIMENSIONS

All dimensions are shown in inches (centimeters) unless otherwise noted.

Specifications subject to change without notice.

PALLET DIMENSIONS

Length Approximate weight Fixtures per pallet Approximate pallet dimensions

(L x W x H)

L24 7 lbs. 408 46" X 51" X 32 11/16"

L46 11 lbs. 176 46" X 51" X 32 1/16"

L48 12 lbs. 176 46" X 51" X 31 3/8"

L92 22 lbs. 176 46" X 98 1/2" X 31 1/16"

L96 24 lbs. 176 46" X 98 1/2" X 31 1/16"

OPERATIONAL DATA

Nominal lumen package

Length (inches)

Delivered Lumens 3000

K CCT @ 77°F (25°C)

ambient temperature

Delivered Lumens 3500

K CCT @ 77°F (25°C)

ambient temperature

Delivered Lumens 4000

K CCT @ 77°F (25°C)

ambient temperature

Delivered Lumens 5000

K CCT @ 77°F (25°C)

ambient temperature Wattage

120V/277V

Comparable Light Source

80 CRI 90 CRI 80 CRI 90 CRI 80 CRI 90 CRI 80 CRI 90 CRI

Le n se d

1500LM 24 1738 1409 1777 1467 1804 1494 1871 1528 15 1-lamp 17W T8

2500LM 24 2265 1846 2315 1900 2351 1947 2438 1991 19 1-lamp 17W T8

3500LM 24 3586 2924 3666 3026 3723 3084 3860 3152 31 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID

3000LM 46 or 48 3172 2586 3243 2677 3293 2728 3415 2788 25 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID

5000LM 46 or 48 4417 3601 4515 3727 4585 3798 4754 3882 34 2-lamp 32W T8, 1-lamp 54W T5H0, 70W HID

7000LM 46 or 48 6535 5328 6681 5515 6785 5619 7035 5744 52 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID

6000LM 92 or 96 6561 5349 6708 5537 6812 5642 7063 5767 48 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID

10000LM 92 or 96 8687 7082 8881 7331 9019 7470 9351 7636 68 4-lamp 32W T8, 2-lamp 54W T5H0, 100W HID

14000LM 92 or 96 12457 10513 12735 10665 12933 10711 13409 10949 104 4-lamp 32W T8, 3-lamp 54W T5H0, 150W HID

U n le n se d

1500LM 24 1881 1534 1923 1588 1953 1618 2025 1654 15 1-lamp 17W T8

2500LM 24 2452 1999 2506 2069 2545 2108 2639 2155 19 1-lamp 17W T8

3500LM 24 3882 3165 3969 3276 4031 3338 4179 3412 31 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID

3000LM 46 or 48 3434 2800 3511 2898 3565 2953 3697 3019 25 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID

5000LM 46 or 48 4781 3898 4888 4035 4964 4111 5147 4203 34 2-lamp 32W T8, 1-lamp 54W T5H0, 70W HID

7000LM 46 or 48 7075 5768 7233 5971 7345 6083 7616 6219 52 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID

6000LM 92 or 96 7103 5791 7261 5995 7374 6108 7646 6243 48 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID

10000LM 92 or 96 9404 7667 9614 7937 9764 8087 10123 8266 68 4-lamp 32W T8, 2-lamp 54W T5H0, 100W HID

14000LM 92 or 96 13485 10994 13786 11381 14001 11596 14516 11853 104 4-lamp 32W T8, 3-lamp 54W T5H0, 150W HID

(234)

(117)

(117)

(5.4) 2-1/8

(5.4) _2

(5.4) _2

(58)

(58)23

(58)(5.4) 2-1/8

(5.4) 2-1/8

(5.4) 2-1/8

Knockout hole is .86in in diameter.

INDUSTRIAL ZL1N

PHOTOMETRICS

Please see www.lithonia.com

REFLECTORS (Optional)

L48 Reflector

L24 Reflector

L96 Reflector

48.00

24.00

96.00

10.70

3.67

10.70

3.67

10.70

3.67

INDUSTRIAL ZL1N

PRODUCT INFORMATION

Advanced plug-in system with three-circuit capability. Available on industrial and strip products and a variety of architectural products mounted in continuous rows. 1, 2, 3 and 4-lamp fixtures. PLR22

(2-circuit) and PLR33 (3-circuit) crossover harness switches hot circuit serving next fixture in row.

Reduces fixture types on job for alternating circuit applications (see example below.)

Easy one-step installation, saves up to 35% on labor costs. Expanded switching flexibility helps save energy.

Rows can be 50% longer with two-circuit systems. Polarized, lock-together nylon connectors prevent miswiring in the field. #12 THHN conductor, rated 600V, 90°C. White neutral wire included. Grounding accomplished by fixture in-row connectors.

CSA certified systems available with up to 2 circuits. G ground required.

Note: Specifications subject to change without notice.

Wiring

PLR

Advanced 3-Circuit Plug-In

Typical Applications

• Multiple-circuit and single-circuit for longer continuous rows

• Multiple-circuit with alternating fixtures on separate circuits, 2-circuit (PLR 22) and 3-circuit (PLR 33)

• Multiple circuit with night-lights located along row as desired

TYPICAL APPLICATIONS

PLR 3 C PLR 3 C PLR 3 C PLR 3 C PLR 2 B PLR 2 B PLR 2 B PLR 2 B PLR 1 PLR 1 PLR 1

(All PLR22)

Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A Circuit B Circuit A

(All PLR33)

Circuit A Circuit B Circuit C Circuit A Circuit B Circuit C Circuit A Circuit B Circuit C Circuit A Circuit B

PLR 3 A PLR 3 A PLR 3 A PLR 3 C PLR 3 B PLR 3 B PLR 3 B PLR 3 C PLR 3 A PLR 3 A PLR 3 A

Series Number of hot wires Branch circuits Dimming Ground

PLR

PLR22

PLR33

(blank) Not required for 22 or 33

1 Black

2 Black and red

3 Black, red and blue

Circuits to which ballast is connected

(blank) Not required for 22 or 33

A Black wire

B Red wire

C Blue wire

LV Low-voltage dimming (blank) No ground in PLR

G Ground. Maximum 2 circuits

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.

INDUSTRIAL ZL1N

SINGLE RELAY

SELECTIONS BELOW WILL EXTEND ORDER LEAD TIME. CONSULT YOUR SALES REPRESENTATIVE FOR DETAILS.

Series Lens option Dimming/Photocell Max. dim level Min. dim level Temp/Humidity Default occupancy time delay

L LSXR passive infrared indoor occupancy sensor

A High mount, 360°

B Low mount, 360°

C High mount aisleway

O None1

H High/low occupancy operation

P Switching photocell (on/off)1

M Dimming and switching photocell

G Dimming and switching photocell with high/low oc-cupancy operation

0 10 VDC

9 9 VDC

8 8 VDC

7 7 VDC

S Minimum dim level of ballast

1 1 VDC

2 2 VDC

3 3 VDC

4 4 VDC

5 5 VDC

6 6 VDC

Z None

T Low temperature2

I 30 sec

D 2.5 min

X 5.0 min

R 7.5 min

U 10.0 min (with minimum 15 minute on time)

V 15.0 min

W 20.0 min

Y 30.0 min

ORDERING INFORMATION Example: LAH0SZU

DUAL RELAY (Available with 120, 277, and 347V only

Series Lens option Poles Operating mode Temp/Humidity Default occupancy time delay

L LSXR passive infrared indoor occupancy sensor

A High mount, 360°

B Low mount, 360°

C High mount aisleway

2 Dual relay J None

K Alternating off relays (promotes even lamp wear)

O Alternating off relays w/photocell

P Switching photocell(on/off)

E Photocell on/off (pole 1 only)

F Photocell on/off - both poles (dual set-point)

Z None

T Low tempera-ture1

I 30 sec

D 2.5 min

X 5.0 min

R 7.5 min

U 10.0 min (with minimum 15 minute on time)

V 15.0 min

W 20.0 min

Y 30.0 min

ORDERING INFORMATION Example: LA2KZU

Replacement lenses: Order as separate catalog number.

Series

LENS

Lens type

6 High mount 360°

10 Low mount 360°

50 High mount aisleway

Package quantity

[blank] Single Lens

J10 10-pack

J100 100-pack

Example: LENS 50 J100

Notes

1 Max and min dim levels not applicable with this option.

2 Ambient temperature rating of -4°F (-20°C) to 131°F (55°C).

Notes

1 Ambient temperature rating of -4°F (-20°C) to 131°F (55°C).

LSXR Fixture Mount Occupancy Sensor (see www.AcuityControls.com for additional information)

• Three interchangeable lens options to satisfy multiple mount-ing heights and coverage pattern requirements.

• Integrated mounting bracket drops lens down 3” from chase nipple.

• Single or dual relay versions — designed with robust protection from the harsh switching requirements of T5 and LED loads.

• Photocell and 0-10VDC dimming options.

• No PIR field calibration or sensitivity adjustments required.

• Sensor ambient temperature rating of 14°F (-10°C) to 131°F

(55°C).

LSXR

configuration

Comparable

CMRB sensor

Old style sensor nomenclature

For shortest lead times use one of the following LSXR configurations

LCOZU CMRB 50 MSI

LCH0SZU CMRB 50 D MSID

LCPZU CMRB 50 P MSIPED

LAOZU CMRB 6 MSI360

LAH0SZU CMRB 6 D MSI360D

LAPZU CMRB 6 P MSI360PED

INDUSTRIAL ZL1N

Passive Infrared Indoor Occupancy Sensor

LSXR

Single Relay

PRODUCT INFORMATION

A standard occupancy time delay is also present to ensure lights turn off (once minimum on timer has also elapsed) if no occupancy is detected.

This timer is factory set at 10 minutes to promote energy savings, but is adjustable between 30 seconds and 30 minutes. These adjustments may be done through the unit’s push-button.

FEATURES

• Four interchangeable lenses - high mount 360°, low mount 360°, high mount aisleway, and small motion 360°.

• Integrated mounting bracket drops lens down 3" from chase nipple - no bracket accessory required.

• 100% digital PIR detection - provides excellent RF immunity

Note: Specifications subject to change without notice.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: LSXR 10 ADC HVOLT 30M

LSXR

Series Lens option Dimming/photocell

LSXR Passive Infrared Indoor Occupancy Sensor

(blank) No lens

6 High mount, 360®

10 Low mount, 360°

50 High mount aisleway

9 Small motion, 360°

610 High and low mount 360°

650 High mount 360° and aisleway

3PK High and low mount 360° and aisleway

4PK All lenses

(blank) None

HL High/low occupancy operation

P Switching photocell (on/off)

ADC Dimming and switching photocell

ANL Dimming and switching photocell with high/low occupancy operation

Voltage Max dim level Min dim level Lead length Temp humidity Default time delay

(blank) 120-277 VAC

(MVOLT)

HVOLT 347-480 VAC

(blank) 10 VDC

9H 9 VDC

8H 8 VDC

7H 7 VDC

(blank) Minimum dimming level of ballast

1V 1 VDC

2V 2 VDC

3V 3 VDC

4V 4 VDC

5V 5 VDC

6V 6 VDC

(blank) 14"

42L 42"

(blank) None

LT Low temperature

(blank) 10 minutes (with minimum 15 minutes on time)

5M 5 minutes (LED only)

15M 15 minutes

20M 20 minutes

30M 30 minutes

For additional information see www.lithonia.com

ZL1N

INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4963 www.lithonia.com © 2013-2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/11/18

OPTIONS AND ACCESSORIE

The Z Series fixture offers numerous options for almost every electrical and optical component, including a long list of field-installable accessories.

HANGER CHAIN

36" chain with Y hanger.

Order as:

HC36

Z SPRING HANGER

Snap ‘n’ lock design requires no fasteners and can be used on T-grid ceiling or universal mounting systems.

Order as:

ZSPRG

ANGLE MOUNTING BRACKET

Luma-tilt™ angle bracket ships as a pair

Order as:

ZLANGBKT

ZL1N LED Striplight

ZACVH HANGER

10' Aircraft cable with Y hanger.

Order as:

ZACVH

WIRE GUARD

Order as:

WGZ24

WGZ48

LED Enclosed and Gasketed

DMW2

FEATURES & SPECIFICATIONS

INTENDED USE —For areas that require good vertical illumination and excellent glare control at low mounting heights. Ideal for open areas, retail spaces and aisles. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate

Compatibility table for suitable uses.

CONSTRUCTION — One-piece 5VA rated fiberglass housing with integral perimeter channel utilizes continuous poured-in-place NEMA 4X gasket. Simple two-piece design consists of housing and optical assembly to streamline installation process. Polymeric latches positively attach to housing and keep from becoming a hindrance during install.

OPTICS — Injection-molded, acrylic lens (.080" thick), provides high impact-resistance comparable to

100% DR. F1 rated for outdoor use, lenses resist breaking, yellowing or becoming brittle over time. UV stabilized polycarbonate diffuser available (.080" thick) in clear or frosted for additional impact strength.

Polycarbonate lens is recommend for lower mounting heights where vandal protection is desired.

ELECTRICAL — Tool-less one piece optical assembly combines LEDs and lens into one component.

Optical assembly easily connects to housing with plug and play harness, eliminating time consuming wiring connections. High-efficiency drivers operate 120-480V offered with 0-10V dimming, allowing granular control when coupled with wireless networking controls. Integral surge protection tested in accordance with IEEE/ANSI C62.41.2 to commercial indoor standards 2.5kV/2kA.

L85 at 60,000 hours.

INSTALLATION — Two-piece design makes installations faster than ever by simplifying wiring connections. Power connection is easily accommodated through pre-drilled holes at each end, optional wet location fittings available for maximum flexibility.

Stainless steel (#316) surface spring-mounting brackets with bail wires standard (2 included) allow for ceiling, wall or suspended mount.

Swivel stem(provided by others) when pendant mounting. Factory installed junction box option accommodates up to 4X4 sized boxes and includes integrated gasket to maintain wet location listings.

Quick Mount Bracket (QMB) ships installed on fixture and is recommended for fastest surface mount installs, ideal for end to end installations or larger jobs.

LISTINGS — CSA Certified to UL and C-UL standards. F1 rating makes luminaire suitable for wet locations without covered ceilings. NEMA 4X rated. IP ratings: IP65 and IP66 rated. 1500 PSI hose-down. See page

3 for ambients.

NSF listed for Splash Zone II.

DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified.

Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

WARRANTY — 5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

INDUSTRIAL LITHONIADMW2LINEARSURFACELEDENCLOSED AND GASKETED

D

IM

MABLE

DIMENSIONS

All dimensions are shown in inches (centimeters) unless otherwise noted.

PHOTOMETRICS

Please see www.lithonia.com.

5.88 (14.94)

3.74 (9.50)

24.0 (60.96)

Catalog

Number

Notes

Type

Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning.

• All configurations of this luminaire meet the Acuity Brands’ specification for chromatic consistency

• This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless control networks marked by a shaded background*

To learn more about A+, visit www.acuitybrands.com/aplus.

TYPE B

LITHONIADMW2LINEARSURFACELEDENCLOSED AND GASKETED

INDUSTRIAL: One Lithonia Way Conyers, GA 30012 Phone: 800-315-4963 www.lithonia.com © 2015-2018 Acuity Brands Lighting, Inc. All rights reserved Rev. 10/08/18

DMW2 LED Wet Location

Accessories: Order as separate catalog number.

RK1 T10BIT W/PIN U Hex-base driver bit, Torx TX10, for tamper-resistant screws with center reject pin

DMW2WLF Wet location fitting

DMW2QMB Quick-mount ceiling bracket

Notes

1. Plastic latches supplied as standard. Provided with 2X KO plugs at both ends

2. Not available with XAD, JSB, PMP4X mounting options. Not available with CS88 cord sets or CS88R receptacle. Must specify voltage. Not available with 347, 480V.

Maximum ambient temperature 25°C.

3. Not for field install.

4. Not available with PS1050 option. Not available with QMB, JSB mounting options.

5. Not available with WLFEND2. Not available with PS1050. Not available with cordsets or sensors.

6. Not available with WLFEND, PS1050, CS cord sets, or MSI sensors

7. Not available with other mounting options

8. Not available with other cord sets. Not available with PS1050 option.

9. Receptacle only. Not available with PS1050.

10. Not available with 4000LM, PS1050, XAD, SBOR & RSBOR.

11. Not available with other external MSI sensors, WLFEND2, XAD. Must specify voltage.

12. Not available with external MSI sensors. Not available with PS1050 option. Must specify voltage. Minimum ambient temperature -20°C.

13. Not available with other external MSI sensors, WLFEND2, XAD

Series1 Length Nominal lumens Diffuser Distribution Voltage Driver Color temperature

Color rendering index

DMW2 LED wet location

L24 24" 2000LM 2,000 lumens

3000LM 3,000 lumens

4000LM 4,000 lumens

ACL Acrylic

AFL Frosted acrylic

PCL Polycarbonate

PFL Frosted Polycarbonate

MD Medium distribution

WD Wide distribution

MVOLT 120-277V

120 120V

208 208V

240 240V

277 277V

347 347V1

480 480V1

GZ10 0-10V

Dimming

30K 3000 K

35K 3500 K

40K 4000 K

50K 5000 K

80CRI 80 CRI

90CRI 90 CRI

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: DMW2 L24 4000LM PCL MD MVOLT GZ10 40K 80CRI

Options

PS1050 Emergency LED battery pack for 0°C and up (1400 lumens)2

E10WCP EM Self-diagnostics battery pack, 10W, Constant Power CEC compliant 2,3

PMP4X Pendant monopoint with NEMA4X fitting (not available with JSB option)3,4

WLFEND Wet location fitting (one fitting out end)5

WLFEND2 Wet location fitting (fittings out both ends)6

JSB Junction box snap-bracket7

QMB Quick-mount ceiling bracket7

CS89 6' white cord, 16/3, no plug, wet location8

CS89L12 12' white cord, 16/3, no plug, wet location8

CS88 6' Brad Harrison 16/3 cord and straight blade plug set, NEMA 4X rated 8

CS88L12 12' Brad Harrison 16/3 cord and straight blade plug set, NEMA 4X rated 8

CS88R Brad Harrison receptacle, NEMA 4X rated 9

NOM Nom certified

TPS TorxT10 tamper-resistant screws

STSL Stainless steel latches

SPD 10KV surge protection device 10

MSI10XAWL10M DSCXAWL Xpoint wireless integral motion sensor, On/Off operation for motion sensing, override Off due to daylight11

MSI10NWL Low mount 360 integral motion sensor, wet location, On/Off operation11

MSI102L3VWL Low mount 360 integral motion sensor, wet location, High/Low operation (3 level)11

MSI10NWL DSCNWL low mount 360 integral motion sensor, wet location , On/Off operation for motion sensing, override Off due to daylight11

XAD XPoint wireless relay12

NLTAIR2 RSBOR10 nLight AIR Generation 2 enabled 360° low mount motion sensor13

INDUSTRIAL: One Lithonia Way Conyers, GA 30012 Phone: 800-315-4963 www.lithonia.com © 2015-2018 Acuity Brands Lighting, Inc. All rights reserved Rev. 10/08/18

DMW2 LED Wet Location

OPERATIONAL DATA 80 CRI*

Package Input Wattage CCT AFL ACL Comparable

Light SourceLumens (LPW) Lumens (LPW)

2000LM 18

30K 2419 (134) 2419 (134)

1-32T8 lamp 35K 2481 (138) 2556 (142)

40K 2536 (141) 2612 (145)

50K 2661 (148) 2740 (152)

3000LM 27

30K 3483 (129) 3587 (133)

2-32T8 lamps 35K 3572 (132) 3680 (136)

40K 3651 (135) 3761 (139)

50K 3831 (142) 3946 (146)

4000LM 40

30K 4631 (116) 4770 (119)

3-32T8 Lamps, 2-54T5HO lamps

35K 4751 (119) 4893 (122)

40K 4855 (121) 5001 (125)

50K 5094 (127) 5247 (131)

CSA LISTED AMBIENT RATING*

Package Bare Fixture X-Point/Sensor Emergency

2000LM 40°C 35°C 0 to 25°C

3000LM 40°C 35°C 0 to 25°C

4000LM -40 to 40°C 35°C 0 to 25°C

*Minimum Ambient is -20°C unless noted.

** Suspended 18" from ceiling.

OPTIONS AND ACCESSORIES

The DMW2 Series fixture offers numerous options for almost every electrical and optical component, including a long list of field-installable accessories.

SMB

Surface mounting bracket

(ships standard with fixture)

QMB

Quick mounting bracket field installable option order as DMW2QMB

JSB

Junction mounting bracket

(factory installed only)

(Not intended for wall mounting.

Voids IP65 rating.)

PMP4X

Pendant monopoint

(factory installed only)

INDUSTRIAL: One Lithonia Way Conyers, GA 30012 Phone: 800-315-4963 www.lithonia.com © 2015-2018 Acuity Brands Lighting, Inc. All rights reserved Rev. 10/08/18

OPTIONS AND ACCESSORIES

The DMW2 Series fixture offers numerous options for almost every electrical and optical component, including a long list of field-installable accessories.

DMW2 LED Wet Location rSBOR/SBOR Fixture Mount Sensor (see www.sensorswitch.com for additional information)

• 360° coverage

• On/Off dim

• Photocell optional

• IP66 rated

• Photocell and 0-10VDC dimming options.

Fixture sensor nomenclature RSBOR/SBOR sensor nomenclature

For shortest lead times use one of the following SBOR configurations

NLTAIR2 RSBOR10 RSBOR 10 EB4 WH G2

MSI10NWL SBOR 10 OEX EB4 WH

MSI102L3VWL SBOR 10 OEX D EB4 WH 3V

MSI10NWL DSCNWL SBOR 10 OEX P EB4 WH

Sfera Chandelier

Shown in: Autumn Bronze / Cafe

Description:

The Sfera Chandelier features detailed center bands and rounded, sweeping curves offering a rustic design with a modern inspiration. Available in Mercury or Cafe tint glass and an Autumn Bronze finish. Available in two sizes. Available with incandescent or LED lamping. LED bulbs are included. LED Products are Energy Star rated.

Damp location rated.

List Price: $481.13 Our Price: $327.17

Shade Color: Cafe Body Finish: Autumn Bronze Lamp: 4 x A19/Medium (E26)/72W/120V Incandescent Wattage: 288W Dimmer: Incandescent Dimensions: 164.25"L x 18.5"W x 24.5"H

Product Number:

Company: Fixture Type: Date: Jan 14, 2020

Project: Approved By: w w w .L ig h to lo g y.

c o m A d d re ss

Ph o n e

Fa x:

W

. F ul le rto n Av e.

C hi c a g o

IL

6-

4-

(7

) 8

-6

C

Yin & Yang Wall Light

Shown in: Old Bronze / Alabaster

Description:

The Yin & Yang Wall Light offers a sleek, modern design featuring a an Alabaster glass shade placed off-center from its wall mount, yet maintaining a balance with its proportions. Available finished in Aged Brass, Old Bronze, or Polished Nickel in two sizes. Suitable for damp locations. UL and CUL listed. ADA compliant.

List Price: $507.50 Our Price: $406.00

Shade Color: Alabaster Body Finish: Old Bronze Lamp: 1 x LED/4.5W/120V LED Wattage: 4.5W Dimmer: Dimmable Dimensions: 5.5"W x 13"H x 2.25"D

Technical Information Luminous Flux: 1200 lumens Lumens/Watt: 266.67 Lamp Color: 3000 K Color Rendering: 90 CRI

Product Number:

Company: Fixture Type: Date: Jan 14, 2020

Project: Approved By: w w w .L ig h to lo g y.

c o m A d d re ss

Ph o n e

Fa x:

W . F ul le rto n

Av e.

C hi c a g o

IL

6-

4-

(7

) 8

-6

D

Yin & Yang Wall Light

Description:

The Yin & Yang Wall Light offers a sleek, modern design featuring a an Alabaster glass shade placed off-center from its wall mount, yet maintaining a balance with its proportions. Available finished in Aged Brass, Old Bronze, or Polished Nickel in two sizes. Suitable for damp locations. UL and CUL listed. ADA compliant.

Shown in: Old Bronze / Alabaster

Price: $417.60

Shade Color: Alabaster Body Finish: Old Bronze Lamp: 1 x LED/9W/120V LED Wattage: 9W Dimmer: Dimmable Dimensions: 5.5"W x 18.5"H x 2.25"D

Technical Information Luminous Flux: 1200 lumens Lumens/Watt: 133.33 Lamp Color: 3000 K Color Rendering: 90 CRI

Product Number:

Company: Fixture Type: Date: Apr 14, 2020

Project: Approved By: w w w .L ig h to lo g y.

c o m A d d re ss

Ph o n e

Fa x:

W . F ul le rto n

Av e.

C hi c a g o

IL

6-

4-

3-

3-

DA

SPECIFICATION FEATURES

Lower Shielding Reflector Painted die cast aluminum or spun aluminum lower reflector with a lensed upper optical chamber providing superior lumen output with minimal source brightness.

Spun reflectors are offered in all Portfolio Alzak® finishes.

Available with non-conductive polymer trim. Reflector is retained with two torsion springs holding the flange tight to the finished ceiling surface. Plaster lathing ring accessory offered for flush reflector transition.

Plaster Frame / Collar Die cast aluminum 1-1/2” deep collar accommodates ceiling materials up to 2”. Universal mounting bracket accepts 1/2” EMT, C channel and bar hangers and adjusts 5” vertically from above and below the ceiling.

Junction Box Listed for (8) #12 AWG (four in, four out) 90°C conductors and feed thru branch wiring. (4) 1/2” and (2) 3/4” trade size pry outs positioned to allow straight conduit runs.

Lever connectors for simple push in wiring.

Thermal Aluminum heat sink conducts heat away from the LED module for optimal performance and long life.

LED

Chip on board with a multitude of highly efficient white LED’s, combined with a high reflectance upper reflector and convex transitional lens produce even distribution with no pixilation.

Rated for 50,000 hours at 70% lumen maintenance. Auto resetting, thermally protected, LED’s are turned off when safe operating temperatures are exceeded. Color variation within 3-step MacAdam ellipses. Quick disconnect allows for tool-less replacement of LED engine from below ceiling. Available in 80, 90 or 97 CRI.

D2W™ – dim-to-warm shifts CCT from 3000K to1850K as fixture dims mimicking halogen sources.

W2N - Tunable white CCT range 2700K to 6500K or 2000K to 5000K, 90 CRI.

Driver Standard 120-277V 0-10V dimming driver provides flicker free dimming from 100% to 1%.

Optional 120V leading edge, <1% 0-10V, Fifth Light, DMX or Lutron® Ecosystem. Driver can be serviced from above or through the aperture.

Connected Lighting Systems WaveLinx tilemount daylight sensor includes control module, sensor and cable allowing use with the comprehensive lighting system.

LumaWatt Pro (powered by Enlighted) wireless tile mount sensor and relay accessory enables wireless control using a tile mount sensor accessory.

Distributed low voltage power system combines power, lighting, and controls with ease of installation.

Code Compliance Thermally protected and cULus listed for wet locations with covered ceiling. IP66 rated when used with IP66 gasket kit accessory. Optional City of Chicago environmental air (CCEA) marking for plenum applications. EMI/RFI emissions per FCC 47CFR Part 18 Class B consumer limits. 2000 lumen and abover are Non-IC rated - Insulation must be kept 3” from top and sides of housing.

IC rated up to 1500 lumens. 5000 lumen and above are marked spacing and must follow spacing requirements. RoHS Compliant.

Photometric testing completed in accordance with IES LM 79 and TM-30 standards. LED life testing completed in accordance with LM 80 standards.

Warranty 5-year warranty

LD4B EU4B

4LBW 4LBM

4LBN

1000-6000 Lumen LED

STEPREPEAT>

Narrow, Medium, or Wide Beam

New Construction

4 inch LED recessed narrow, medium, or wide beam downlight designed for glare free even illumination. Featuring a two-stage diffused reflector system producing smooth distribution with excellent light control and low aperture brightness. Lumen packages range from 1000 to 6000 with color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, and 5000K.

VividTune: Dim-to-warm technology – similar to halogen at full power, the 3000K LED warms smoothly as dimmed to 1850K creating a rich warm glow within the space. Tunable white technology - adjust the color temperature from warm white to cool white while independently controlling intensity.

DESCRIPTION

Refer to ENERGY STAR® Qualified Products List. Can be used to comply with California Title 24 High Efficacy requirements.

EM OPTION

Ă 4-1/4" [108mm]

10-3/16" [259mm]

14-1/2" [369mm]

Ă 5-1/8" [130mm]

Ă 5-11/16" [144mm]

5-1/2" [140mm]

13-3/4" [349mm]

9-13/16" [250mm]

TD520034EN

June 4, 2019 9:09 AM

Portfolio Catalog # Type

Project

Comments Date

Prepared by

F,F1

LD4B EU4B 4LBW 4LBM 4LBN

ENERGY DATA

Sound Rating: Class A standards

(Values at non-dimming line voltage)

Minimum Starting Temperature: -30°C (-22°F)

EMI/RFI: FCC Title 47 CFR, Part 15, Class B (Consumer)

Input Voltage: UNV (120V - 277V)

Power Factor: >0.90 (at nominal input 120-277 VAC & 100% of Rated Output Power)

Input Frequency: 50/60Hz

1000 Lumen D010 1500 Lumen D010

Input Power: 11W THD: <14% Input Power: 15.5W THD: <13%

120V Input Current: 0.09A 277V Input Current: 0.04A 120V Input Current: 0.13A 277V Input Current: 0.06A

2000 Lumen D010 3000 Lumen D010

Input Power: 21.2W THD: <9% Input Power: 27.6W THD: <10%

120V Input Current: 0.18A 277V Input Current: 0.08A 120V Input Current: 0.23A 277V Input Current: 0.10A

4000 Lumen D010 5000 Lumen D010TE

Input Power: 41.6W THD: <13% Input Power: 57.9W THD: <14%

120V Input Current: 0.35A 277V Input Current: 0.15A 120V Input Current: 0.49A 277V Input Current: 0.22A

6000 Lumen D010TE

Input Power: 59.7W THD: <14%

120V Input Current: 0.50A 277V Input Current: 0.22A

120V 277V

Lumens Inrush (A) Duration (ms) Inrush (A) Duration (ms)

1000 Lumen D010 1.02 0.041 2.18 0.021

1500 Lumen D010 1.02 0.042 2.24 0.064

2000 Lumen D010 1.02 0.077 2.43 0.027

3000 Lumen D010 1.15 0.067 3.26 0.027

4000 Lumen D010 1.2 0.088 3.9 0.03

5000 Lumen D010TE 5.1 0.132 10.2 0.153

6000 Lumen D010TE 5.4 0.123 10.8 0.154

ENERGY

SAMPLE NUMBER: LD4B15D010IEMBOD

Housing Lumens1 Voltage Driver Options3

LD4B=LED Downlight 4” Nominal Aperture

LD4BCP=LED Downlight 4” Nominal Aperture, Chicago Plenum

10=1000 lumens 15=1500 lumens 20=2000 lumens 30=3000 lumens 40=4000 lumens 50=5000 lumens15

60=6000 lumens15

Blank=120-277V 3=347V (step down transformer)

1000-4000 D010=0-10V Dimming, 1% to 100%, 120V-277V D010TR=0-10V or Line Voltage Dimming, 5% to 100%, 120V-277V DE010=0-10V Linear Dimming, 0% to 100%, 120V-277V D5LT=Fifth Light® (DALI) Logarithmic Dimming, 0% to 100%, 120V-277V DMX=DMX/RDM Logarithmic Dimming, 0% to 100%, 120V-277V13

DL2=Lutron® Hi-Lume Forward Phase Dimming, 1% to 100%, 120V Only

DLE=Lutron Ecosystem dimming 1% to 100%, 120V-277V DLV=Low voltage dimming driver (1-100%) for use with DLVP system

(3000 lumen and below)3,14

5000-6000 D010TE=0-10V 1% or trailing edge 10%, 120-277V (120V only with trailing edge dimming) Tunable white 1000-2000 Lumens16

1DE010W2N2050=0-10V dimming, 0% to 100%, 120V, 2000K - 5000K 1DE010W2N2765=0-10V dimming, 0% to 100%, 120V, 2700K - 6500K 1D5LTW2N2050=Fifth Light (DALI), 0% to 100%, 120, 2000K - 5000K 1D5LTW2N2765=Fifth Light (DALI), 0% to 100%, 120V, 2700K - 6500K 2DE010W2N2050=0-10V dimming, 0% to 100%, 277V, 2000K - 5000K 2DE010W2N2765=0-10V dimming, 0% to 100%, 277V, 2700K - 6500K 2D5LTW2N2050=Fifth Light (DALI), 0% to 100%, 277V, 2000K - 5000K 2D5LTW2N2765=Fifth Light (DALI), 0% to 100%, 277V, 2700K - 6500K

EMBOD=Bodine® Emergency Module with Remote Test Switch

EM7=7W Emergency Module with Remote Test Switch

EM14=14W Emergency Module with Remote Test Switch

IEMBOD=Bodine® Emergency Module with Integral Test Switch

IEM7=7W Emergency Module with Integral Test Switch

IEM14=14W Emergency Module with Integral Test Switch

EMV7=7W Low Voltage Emergency Module with Remote Test Switch4

EMV14=14W Low Voltage Emergency Module with Remote Test Switch4

IEMV7=7W Low Voltage Emergency Module with Integral Test Switch4

IEMV14=14W Low Voltage Emergency Module with Integral Test Switch4

SWPD1=Factory installed WaveLinx tilemount daylight sensor (includes control module, sensor, cable, and tile mount)

LWTPD1=Factory installed LumaWatt Pro wireless sensor kit

SAMPLE NUMBER: EU4B10208035

Power Module Lumen Levels1 CRI Color

EU4B=4” Universal LED Module

1020=1000, 1500, 2000 lumens 3040=3000-4000 lumens 5000=5000 lumens15

6000=6000 lumens15

1015IC=1000, 1500 lumen IC rated

80=80 CRI Minimum 90=90 CRI Minimum 97=97 CRI Minimum

80 CRI

27=2700K 30=3000K 35=3500K 40=4000K 50=5000K

90 CRI

24=2400K 27=2700K 30=3000K 35=3500K 40=4000K 50=5000K

97 CRI

27=2700K 30=3000K

Dim 2 Warm 109030D2W=1000 lumen, 90 CRI, Dim 2 Warm, IC rated 159030D2W=1500 lumen, 90 CRI, Dim 2 Warm, IC rated 209030D2W=2000 lumen, 90 CRI, Dim 2 Warm 309030D2W=3000 lumen, 90 CRI, Dim 2 Warm

Tunable white16

1020W2N902050 =1000, 1500, 2000 lumens, 90 CRI, tunable white 2000K-5000K 1020W2N902765 =1000, 1500, 2000 lumens, 90 CRI, tunable white 2700K-6500K

SAMPLE NUMBER: 4LBM1LIE

Trim Distribution5 Flange Finish Options

4LB=4” LED N=Narrow (30° Beam), Spun Aluminum M=Medium (50° Beam), Spun Aluminum W=Wide (75° Beam), Spun Aluminum S=Shallow (75° Beam), Spun Aluminum PS=Non-conductive Shallow (75° Beam), Injection Molded white11

CS=Cast Shallow (75° Beam), Die Cast Aluminum BA=Baffle, Spun Aluminum7

0=White Polymer Trim Ring 1=Self-flanged12

2=White Painted Self-flanged

LI=Specular Clear10

H=Semi-Specular Clear10

WMH=Warm Haze10

WH=Wheat10

GPH=Graphite Haze10

B=Specular Black10

MW=Matte White MB=Matte Black9

MMS=Matte Metallic Silver8

E=Integral Emergency Test Switch Hole6

Accessories

HSA4=Slope Adapter for 4” Aperture Housings, Specify Slope in 5° increments TRM4=Metal Trim Ring, Specify Color2

TRR4=Rimless Trim Ring2

LGSKT4IP66=IP66 Gasket Kit PRR4=Rimless Plaster Ring for Flush Mount2

Bar Hangers HB26=C-channel Bar Hanger, 26” Long, Pair HB50=C-channel Bar Hanger, 50” Long, Pair RMB22=Wood Joist Bar Hanger, 22” Long, Pair

Transformers H347=347 to 120V Step Down Transformer, 75VA H347200=347 to 120V Step Down Transformer, 200VA

Connected Lighting Systems PORLWTPD1=LumaWatt Pro wireless sensor kit (0-10V only) field installed14

TMSWPD1=WaveLinx tilemount daylight sensor (includes control module, sensor, cable and tile mount) field installed14

Notes:

1 Nominal Lumens will vary depending on selected color, driver and reflector finish.

2 Order spun trim with polymer trim ring or die cast with rimless flange (Consult specification sheet for color ordering information and options).

3 Not available with Chicago Plenum.

4 ULus approved only.

5 Beam angles are nominal with LI finish trims.

6 Only available with Narrow and Medium Spun Aluminum trims.

Required for use with all IEMBOD, IEM7, and IEM14 housings.

7 Only available with Matte White and Matte Black Finishes.

8 Only available on CS distribution.

9 Available only on BA and CS distributions.

10 Not available on PS, CS or BA distributions.

11 Matte white and self flanged only, 2000 lumen max.

12 Flange is same finish as the reflector.

13 DMX fixtures default to full on upon loss of DMX signal.

14 Refer to system specifications for additional information, features, and benefits.

Order either factory installed option or accessory.

Use with 0-10V driver.

15 Product is marked spacing and must be installed with the following minimum spacing

- Center to center of adjacent luminaires: 36”

- Center of luminaire to side of building member: 18”

- Minimum overhead: ½” 16 Non-IC

Specifications and dimensions subject to change without notice.

Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting

CANDLEPOWER DISTRIBUTION

Downlight

2790 15º 30º

45º

60º

75º

90º

CANDLEPOWER DISTRIBUTION

Downlight

2267 15º 30º

45º

60º

75º

90º

CANDLEPOWER DISTRIBUTION

Downlight

1016 15º 30º

45º

60º

75º

90º

CANDLEPOWER DISTRIBUTION

Downlight

688 15º 30º

45º

60º

75º

90º

ZONAL LUMEN SUMMARY

Zone Lumens % Fixture

0-30 1144 77.3

0-40 1406 95

0-60 1477 99.7

0-90 1481 100

90-180 0 0

0-180 1481 100

ZONAL LUMEN SUMMARY

Zone Lumens % Fixture

0-30 926 82.1

0-40 1094 97

0-60 1127 99.9

0-90 1128 100

90-180 0 0

0-180 1128 100

ZONAL LUMEN SUMMARY

Zone Lumens % Fixture

0-30 512 34.2

0-40 816 54.5

0-60 1333 89

0-90 1497 100

90-180 0 0

0-180 1497 100

ZONAL LUMEN SUMMARY

Zone Lumens % Fixture

0-30 816 53.8

0-40 1252 82.5

0-60 1513 99.7

0-90 1518 100

90-180 0 0

0-180 1518 100

MEDIUM (50° BEAM)

Test Number P201206

Housing LD4B15D010

Module EU4B10208035

Trim 4LBM1LI

Lumens 1481

Efficacy 103.6 Lm/W

SC 0.71

NARROW (30° BEAM)

Test Number P201208

Housing LD4B15D010

Module EU4B10208035

Trim 4LBN1LI

Lumens 1128

Efficacy 78.9 Lm/W

SC 0.5

SHALLOW (75° BEAM)

Test Number P201210

Housing LD4B15D010

Module EU4B10208035

Trim 4LBCS1MMS

Lumens 1497

Efficacy 104.7 Lm/W

SC 1.16

WIDE (75° BEAM)

Test Number P201204

Housing LD4B15D010

Module EU4B10208035

Trim 4LBW1LI

Lumens 1518

Efficacy 106.2 Lm/W

SC 1.3

CONE OF LIGHT

D FC L W

5.5' 75 3.8 3.8

7' 46 5 5

8' 35 5.6 5.6

9' 28 6.4 6.4

10' 23 7 7

12' 16 8.4 8.4

0º D

CONE OF LIGHT

D FC L W

5.5' 92 2.6 2.6

7' 57 3.4 3.4

8' 44 3.8 3.8

9' 34 4.4 4.4

10' 28 4.8 4.8

12' 19 5.8 5.8

0º D

CONE OF LIGHT

D FC L W

5.5' 23 6.2 6.2

7' 14 8 8

8' 11 9.2 9.2

9' 9 10.4 10.4

10' 7 11.6 11.6

12' 5 13.8 13.8

0º D

CONE OF LIGHT

D FC L W

5.5' 30 7 7

7' 19 9 9

8' 14 10.4 10.4

9' 11 11.6 11.6

10' 9 13 13

12' 6 15.6 15.6

0º D

CANDELA TABLE

Degrees Vertical Candela

0 2267

5 2227

15 1690

25 1027

35 409

45 70

55 8

65 3

75 1

85 0

90 0

CANDELA TABLE

Degrees Vertical Candela

0 2790

5 2550

15 1421

25 667

35 266

45 32

55 3

65 1

75 0

85 0

90 0

CANDELA TABLE

Degrees Vertical Candela

0 688

5 682

15 645

25 577

35 486

45 380

55 253

65 126

75 32

85 1

90 0

CANDELA TABLE

Degrees Vertical Candela

0 914

5 925

15 998

25 977

35 707

45 286

55 30

65 4

75 1

85 0

90 0

LUMINANCE

Average Candela Degrees

Average 0°

Luminance

45 1072

55 151

65 77

75 42

85 0

LUMINANCE

Average Candela Degrees

Average 0°

Luminance

45 489

55 55

65 26

75 0

85 0

LUMINANCE

Average Candela Degrees

Average 0°

Luminance

45 5827

55 4771

65 3226

75 1339

85 124

LUMINANCE

Average Candela Degrees

Average 0°

Luminance

45 4372

55 574

65 100

75 42

85 0

PHOTOMETRY

Specifications and dimensions subject to change without notice.

Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/lighting

CANDLEPOWER DISTRIBUTION

Downlight

7625 15º 30º

45º

60º

75º

90º

CANDLEPOWER DISTRIBUTION

Downlight

6015 15º 30º

45º

60º

75º

90º

CANDLEPOWER DISTRIBUTION

Downlight

2775 15º 30º

45º

60º

75º

90º

CANDLEPOWER DISTRIBUTION

Downlight

1880 15º 30º

45º

60º

75º

90º

ZONAL LUMEN SUMMARY

Zone Lumens % Fixture

0-30 3036 77.3

0-40 3731 95

0-60 3918 99.7

0-90 3929 100

90-180 0 0

0-180 3929 100

ZONAL LUMEN SUMMARY

Zone Lumens % Fixture

0-30 2531 82.1

0-40 2989 97

0-60 3080 99.9

0-90 3083 100

90-180 0 0

0-180 3083 100

ZONAL LUMEN SUMMARY

Zone Lumens % Fixture

0-30 1400 34.2

0-40 2230 54.5

0-60 3645 89

0-90 4093 100

90-180 0 0

0-180 4093 100

ZONAL LUMEN SUMMARY

Zone Lumens % Fixture

0-30 2230 53.8

0-40 3421 82.5

0-60 4134 99.7

0-90 4148 100

90-180 0 0

0-180 4148 100

MEDIUM (50° BEAM)

Test Number P201207

Housing LD4B40D010

Module EU4B30408035

Trim 4LBM1LI

Lumens 3929

Efficacy 94 Lm/W

SC 0.71

NARROW (25° BEAM)

Test Number PP201209

Housing LD4B40D010

Module EU4B30408035

Trim 4LBN1LI

Lumens 3083

Efficacy 73.8 Lm/W

SC 0.5

SHALLOW (75° BEAM)

Test Number P201211

Housing LD4B40D010

Module EU4B30508035

Trim 4LBCS1MMS

Lumens 4093

Efficacy 97.9 Lm/W

SC 1.16

WIDE (75° BEAM)

Test Number P201205

Housing LD4B40D010

Module EU4B30408035

Trim 4LBW1LI

Lumens 4148

Efficacy 99.2 Lm/W

SC 1.3

CONE OF LIGHT

D FC L W

5.5' 199 3.8 3.8

7' 123 5 5

8' 94 5.6 5.6

9' 74 6.4 6.4

10' 60 7 7

12' 42 8.4 8.4

0º D

CONE OF LIGHT

D FC L W

5.5' 252 2.6 2.6

7' 156 3.4 3.4

8' 119 3.8 3.8

9' 94 4.4 4.4

10' 76 4.8 4.8

12' 53 5.8 5.8

0º D

CONE OF LIGHT

D FC L W

5.5' 62 6.2 6.2

7' 38 8 8

8' 29 9.2 9.2

9' 23 10.4 10.4

10' 19 11.6 11.6

12' 13 13.8 13.8

0º D

CONE OF LIGHT

D FC L W

5.5' 83 7 7

7' 51 9 9

8' 39 10.4 10.4

9' 31 11.6 11.6

10' 25 13 13

12' 17 15.6 15.6

0º D

CANDELA TABLE

Degrees Vertical Candela

0 6015

5 5909

15 4484

25 2725

35 1085

45 186

55 21

65 8

75 3

85 0

90 0

CANDELA TABLE

Degrees Vertical Candela

0 7625

5 6969

15 3883

25 1822

35 727

45 87

55 8

65 3

75 0

85 0

90 0

CANDELA TABLE

Degrees Vertical Candela

0 1880

5 1864

15 1763

25 1578

35 1329

45 1040

55 691

65 344

75 87

85 3

90 0

CANDELA TABLE

Degrees Vertical Candela

0 2499

5 2528

15 2727

25 2670

35 1933

45 780

55 83

65 11

75 3

85 0

90 0

LUMINANCE

Average Candela Degrees

Average 0°

Luminance

45 2844

55 400

65 205

75 113

85 0

LUMINANCE

Average Candela Degrees

Average 0°

Luminance

45 1337

55 149

65 67

75 0

85 0

LUMINANCE

Average Candela Degrees

Average 0°

Luminance

45 15933

55 13046

65 8819

75 3657

85 323

LUMINANCE

Average Candela Degrees

Average 0°

Luminance

45 11948

55 1569

65 274

75 113

85 0

PHOTOMETRY

TD518030EN

11/13/2018

S P E C I F I C A T I O N F E A T U R E S

D E S C R I P T I O N

The Halo Surface LED Downlight (SLD) incorporates WaveStream™ technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional downlight. SLD6-1200 UNV series is designed for installation in many 4” x 2-1/8” deep square junction boxes. Accessory mounting kit allows retrofit in 5” and 6” IC and Non-IC recessed housings.* Suitable for residential or commercial installations. Ideal for closets, storage areas, attics and basements.

Compliant with NFPA® 70, NEC® Section 410.16 (A)(3) and 410.16 (C)(5).

CONSTRUCTION

• Die cast aluminum trim ring, and die formed aluminum frame

OPTICS

• WaveStream™ technology provides uniform luminance from a low profile flat lens

• AccuAim™ optics provide directional control for the

“cone-of-light” beam distribution of a traditional downlight.

• Precision molded lens features high transmission polymer with UV stabilized protecting film

DESIGNER TRIMS

Accessories (sold separately) SLD designer trims are accessory rings that attach to the SLD for a permanent finish.* Refer to SLD accessories specification sheet for details.

• White (Paintable)

• Satin Nickel

• Tuscan Bronze *SLD accessory trims attach with permanent adhesion and are not interchangeable after installation.

ELECTRICAL JUNCTION BOX

MOUNTING

• SLD may be used in compatible electrical junction boxes in direct contact with insulation including spray foam insulation

• Suitable for installation in many 4” x 2-1/8” deep square electrical junction boxes.

• Driver consumes 3 cubic inches of junction box.

• Compatible with other junction boxes with accessory SLD6EXT extension spacer ring.

• Installer must ensure compatibility of fit, wiring and proper mounting in the electrical junction box.

This includes all applicable national and local electrical and building codes.

• Proprietary Slot-N-Lock quick installation system for junction box installation

• T-bracket with Slot-N-Lock mounting tabs included

OPTIONAL - RECESSED HOUSING

MOUNTING

• Accessory SLD6ACCKIT required for mounting in 5” and 6” enclosed recessed housings

• May be installed in IC recessed housings in direct contact with insulation

* Note: Not for use in recessed housings in direct contact with spray foam insulation. Refer to

NEMA LSD 57-2013

• The SLD6 may be used with any 5 or 6 inch diameter recessed housing constructed of steel or aluminum with an internal volume that exceeds 107.9 in³.

LED

• Linear LED arrays are integrated in trim perimeter

• Color Temperature: 2700K, 3000K, 3500K, 4000K

• CRI options: 80 and 90

- 90 CRI can be used for

California Title 24 compliance/ certified to Title 20

- 80 CRI can be used to comply with California Title 24 Non- Residential Lighting Controls as a LED luminaire.

WARRANTY

Eaton provides a five year limited warranty on the SLD LED

LED CHROMATICITY

• A tight chromaticity specification ensures LED color uniformity, sustainable Color Rendering Index (CRI) and Correlated Color Temperature (CCT) over the useful life of the LED

• LED chromaticity of 3 SDCM exceeds ENERGY STAR® color standards per ANSI.

• 90 CRI model features high color performance with R9 greater than 50

• Every Halo LED is quality tested, measured, and serialized in a permanent record to register lumens, wattage, CRI and CCT.

• Halo LED serialized testing and measurement ensures color and lumen consistency on a per-unit basis, and validates long-term product consistency over time

ELECTRICAL CONNECTIONS

Junct ion Box

• Compatible with 4” x 2-1/8” deep square boxes

• Supply Wire Adapter with LED quick connector included

• LED connector is a non-screwbase luminaire disconnect for tool-less installation

Opt ional - Recessed Hous ings

• Accessory SLD6ACCKIT required.

• LED connector is compatible with

Halo 5” H550 Series and 6” H750, H2750 Series LED Housings

• LED Connector meets California Title-24 high-efficacy luminaire standard as a non-screw base

LED DRIVER

• Driver is a 120V-277V universal voltage input, high efficiency,…