Attachment D_SLS-370-691A R2 and SLS-370-692A R2 Spec.pdf
PDF 293 KB Posted
- Solicitation number
- 6923G526Q0041
About this file
This document contains technical specifications and engineering drawings for rubber fenders manufactured for the Great Lakes Saint Lawrence Seaway Development Corporation.
The fender manufacturer must fabricate two models: a 16-inch thick rubber fender (Drawing No. SLS-370-69/1A-R2) and a 10-inch thick rubber fender (Drawing No. SLS-370-69/2A-R2). Key fabrication requirements include shop-drilled holes with all hole diameter tolerances to be oversize only, dimensional tolerances of ±1/8 inch on all non-hole length dimensions unless otherwise noted, and cumulative stackup error not to exceed ±1/8 inch, with steel template guidance drilling recommended. All pieces must be handled, packaged, and shipped with protective dunnage to prevent damage and allow forklift insertion without harm. Prior to manufacture, the fender manufacturer must submit for approval: certified rubber material properties meeting or exceeding Statement of Work requirements, manufacturer qualifications, and shop drawings that conform precisely to the dimensional tolerances specified on the GLS-provided drawings. Non-conformance to specified dimensional tolerances may result in the offer being deemed non-responsive. Reference Drawing No. SLS-370-69/1 contains information regarding same fender with mounting hardware.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment D_SLS-370-691A R2 and SLS-370-692A R2 Spec_RV1.pdf | ||
| 6923G526Q0041 A00001 .pdf | ||
| 6923G526Q0041 QA.pdf | ||
| Attachment B_Pricing Sheet.xlsx | XLSX spreadsheet | |
| Attachment C_SLS-370-274 Rev 2_Steel Mounting Hardware.pdf | ||
| Attachment A_SOW.pdf | ||
| RFQ 6923G526Q0041.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
16" Thickness
NOTE: ALL SHOP DRAWINGS
PROVIDED SHALL CONFORM TO
THE DIMENSIONAL TOLERANCES
AS SPECIFIED ON THIS SHEET.
10" Thickness
NOTE: ALL SHOP DRAWINGS
PROVIDED SHALL CONFORM TO
THE DIMENSIONAL TOLERANCES
AS SPECIFIED ON THIS SHEET.
SPECIFICATIONS
1. FENDER REQUIREMENTS.
1.1. Materials. The fender materials shall meet or exceed the requirements specified in the Statement of Work.
1.2. Fabrication. The fender elements shall be fabricated to the dimensions shown on revised Drawing No. SLS-370-69/1A-R2 (16" thick rubber fender) and SLS-370-69/2A- R2 (10" thick rubber fender). Holes shall be shop-drilled. All pieces shall be handled, packaged and shipped in such a way as to prevent damage. Dunnage is to be provided on the truck when shipped so that forklift forks may be inserted under the fenders without damaging the fender.
1.3. Submittals.
The fender manufacturer shall submit the following items for approval prior to manufacture:
• Certified rubber material properties.
• Fender manufacturer qualifications, per paragraph 1.3.1.
• Shop drawings for approval. Shop drawings shall conform to the dimensional tolerances specified on the GLS provided drawings. Failure to meet the specified dimensional tolerances may result in the offer being deemed non-responsive.
| SLS-370-691A R2 & SLS-370-692A R2.pdf |
| SLS-370-692A R2 (10_in).pdf |
| ADP4A17.tmp |
| SPECIFICATIONS |
| 1.3. Quality Assurance. |
| 1.4. Submittals. |
SLS-370-691A R2 (16_in).pdf
Drawing SLS-370-274-R2 RUBBER FENDER STEEL Mounting HARDWARE_.pdf
File details come from the government source that posted it. Updated .