Attachment D - QAP E33.10 Manufacturing and Fill Points.pdf
PDF 280 KB Posted
- Solicitation number
- SPE60124R0304
- Issued by
-
Defense Logistics Agency Energy
About this file
This document is an attachment that provides information on the manufacturing and fill points for Monomethylhydrazine (MMH), a propellant product, under Solicitation SPE60124R0304.
The attachment identifies the primary and secondary manufacturing and filling locations for the MMH product, which are facilities located at Vandenberg Space Force Base, California and Kennedy Space Center, Florida. It specifies that suppliers must provide a 30-day notice to the government before using an alternate manufacturing/filling point. The contract price will not be adjusted if the contractor uses a different fill location, but the contractor must reimburse the government for any increased transportation costs.
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REVISIONS
REV DESCRIPTION DATE APPROVAL
ENERGY QAP E33.10 January 2023
PRODUCT: PROPELLANT,
MONOMETHYLHYDRAZINE (MMH)
IAW DLA ENERGY MMH FS1, NSN: 9135-01-
697-9015 F.O.B. Destination
PRIMARY Name / Manufacturing Fill Plant Address / Phone#
SECONDARY Name/ Manufacturing Fill Plant Address / Phone#
SOLICITATION
ITEM #
806 13TH Street, BLDG 7000 Vandenberg SFB, CA 93437
806 13TH Street, BLDG 7000 Vandenberg SFB, CA 93437
BLDG. K7-0418/KPLSS-001
Kennedy Space Center (KSC), FL 32899
BLDG. K7-0418/KPLSS-001
Kennedy Space Center (KSC), FL 32899
806 13TH Street, BLDG 7000 Vandenberg SFB, CA 93437
SUPPLEMENTAL QUALITY ASSURANCE PROVISION (SQAP)
E33.10 MANUFACTURING AND FILLING POINTS (AEROSPACE ENERGY)
(a) Provide the name, complete addresses and telephone number of the manufacturing and filling points for each product to be furnished, and identify the filling points as primary or secondary.
DLA Energy - SPE60124R0304 - Product/Locations:
(b) Suppliers that list primary and alternate manufacturing/filling points for supporting the same requirement shall provide a 30 calendar day notice to the Government prior to offering an initial shipment from an alternate manufacturing/filling point.
(c) For f.o.b. origin shipments, the contract price shall not be adjusted if a Contractor uses a different fill location other than the primary fill point during contract performance. However, if the use of the alternate fill point results in increased costs to the Government, such as transportation costs, the Contractor agrees to reimburse the Government for those increased costs.
Sheet1
File details come from the government source that posted it. Updated .