Attachment B - Section 10 75 00 Flagpoles Specification.pdf
PDF 108 KB Posted
- Attached to
- Snake River National Cemetery Flagpole Repair-
- Solicitation number
- 36C78625Q0110
About this file
This document is a technical specification section (10 75 00) for flagpole repairs at Snake River Canyon National Cemetery, dated 7/9/2025, with Project No. 941-M&R-FY25-065. The specification details requirements for deluxe internal halyard fixed high dimensional, ground set, cone tapered, seamless tube flagpoles, including precise fabrication and material specifications. Key technical requirements include aluminum and stainless steel materials (ASTM B241, B209, A167 standards), with components such as a gold anodized finial ball, satin brushed aluminum shaft, extra heavy revolving truck, internal halyard cable assemblies, and a gearless self-locking winch mechanism. The flagpoles will be heavily waxed and require careful cleaning and protection during construction, with the fabricator to approve any cleaning methods. The specification emphasizes high-quality manufacturing and installation standards, requiring manufacturers and installers with at least 5 and 3 years of respective experience.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| AMEND 1.docx | DOCX document | |
| IMG_3346.jpg | JPG image | |
| RFIs-AMEND 1.docx | DOCX document | |
| IMG_3347.jpg | JPG image | |
| IMG_3348.jpg | JPG image | |
| SOW.docx | DOCX document | |
| Attachment C - Flagpole Detail Drawing.pdf | ||
| Attachment A - Pictures of damage to flagpoles.pdf | ||
| 36C78625Q0110 RFQ-Snake River Flagpole Repair.docx | DOCX document | |
| wage determination.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Snake River Canyon National Cemetery Repair Flagpoles 7/9/2025 Project No. 941-M&R-FY25-065
FLAGPOLES
10 75 00 - 1
SECTION 10 75 00
FLAGPOLES
PART 1 - GENERAL
1.1 DESCRIPTION
A. This section specifies materials, shipping and delivery protection, storage, handling, and installation of flagpoles to be installed in the project area indicated. Flagpoles shall be deluxe internal halyard fixed high dimensional, ground set, cone tapered, seamless tube flag poles together with concealed halyard, revolving truck, finial ball, flashing collar, anchors, fittings, and accessories.
1.2 RELATED WORK
A. NOT USED
1.3 SUBMITTALS
A. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND
SAMPLES.
B. Shop Drawings: Flagpole details of all parts & accessories, and list of all materials, including but not limited to: base with support plate and grounding spike, lightning kit, pole, flash collar, revolving truck, internal halyard, cable assembly, winch detail w/lock, hooks, beaded retainer ring, counterweight, winch handle and finial ball, along with construction and installation details. Flagpole components shall match those for the main pole.
C. Manufacturer's Literature and Data: Flagpole, base and all parts and accessories.
1.4 APPLICABLE PUBLICATIONS
A. Publications listed below form a part of this specification to extent referenced. Publications are referenced in text by the basic designation only. Comply with applicable provisions and recommendations of the following, except as otherwise shown or specified.
B. American Society for Testing and Materials (ASTM):
A167-99 (R2009) Stainless and Heat-resisting Chromium-Nickel Steel Plate, Sheet and Strip
B209-10 Aluminum and Aluminum Alloy-Sheet and Plate
B241/B241M-12 Aluminum and Aluminum-Alloy Seamless Pipe and
Seamless Extruded Tube
C. American National Standards Institute Inc. (ANSI):
ANSI/NAAMM 1001-97 Guide Specifications for Design of Metal Flagpoles Manual.
1.5 QUALITY ASSURANCE
A. Manufacturer’s Qualifications: Firms regularly engaged in the manufacture of metal flagpoles and accessories, of types, size and configurations required, whose products have been satisfactory use in similar service for not less than 5 years.
B. Installer’s Qualifications: Firm with at least 3 years of successful installation experience on projects having flagpole installation work similar to that required for this project.
10 75 00 - 2
PART 2 - PRODUCTS
2.1 MATERIALS
A. Aluminum, Extruded: ASTM B241, alloy 6063 - T6.
B. Aluminum, Plate and Sheet: ASTM B209, alloy ll00.
C. Stainless Steel: ASTM A167, Class 302 or 304.
2.2 FABRICATION
A. Base: Aluminum plate or stainless steel, of stock design similar to that shown.
B. Finial Ball: 0.0747-inch-thick spun aluminum sphere, with seams of ball welded flush and watertight. Mount ball on threaded rod to fit truck. Diameter of ball shall be approximately same as pole diameter.
C. Truck: Equip pole with extra heavy, revolving, non-fouling, ball bearing type truck with cast aluminum body and designed to accept an ornament on top.
D. Halyards: Internal type cable assemblies. 1/8” and/or 3/16” stainless steel aircraft cable incorporating a stainless-steel swivel, upper cable section, and flag arrangement with cable and two stainless steel quick links and two stainless steel swivel snaps. The cable assemblies shall be constructed to fit the flagpole size and flag size specified.
E. Beaded Retainer Ring and Counterweights: Provide as recommended by manufacturer based on the pole size, flag size and design wind velocity. Provide recommended connection accessories.
F. Internal Halyard Accessories: Furnish and install a gearless, self-locking at any point, direct drive winch that does not require welding for installation and does not require monthly application of lubrication and is attached to the pole with one stainless steel bolt on the back side of the pole. The unit shall be silver in color. Provide locking mechanism and two keys.
Provide a winch handle designed for the unit. Pole shall be reinforced through the area of the winch opening by the manufacturer’s standard reinforcement method.
G. Foundation Tube: Hot dipped galvanized corrugated steel tube. Tube shall have a steel base plate and centering wedges and support plate for connection of lightening kit. Bottom plate shall be a minimum of 3/16” thickness.
2.3 FINISH
A. Finish exposed surfaces of flagpoles.
B. Flagpole shaft: Satin brushed aluminum, then heavily waxed.
C. Finial ball: Gold anodized aluminum, then heavily waxed.
D. Base: Finish to match flagpole.
PART 3 - EXECUTION
3.1 INSPECTION
A. NOT USED
10 75 00 - 3
3.2 PREPARATION
A. NOT USED
3.3 INSTALLATION
A. NOT USED.
3.4 LIGHTNING ROD
A. NOT USED
3.5 CLEANUP
A. After installation, carefully clean the flagpole and appurtenances, removing all dirt stains, and all other incident defacements.
1. Fabricator should be contacted regarding the use of any cleaners and must approve of them before use.
2. Protection of Finished Work: Flagpoles for this project shall be protected at all times during construction.
B. Clean up area of excess material and debris.
- - - E N D - - -
| SECTION 10 75 00 FLAGPOLES |
| PART 1 - GENERAL |
| 1.1 DESCRIPTION |
| A. This section specifies materials, shipping and delivery protection, storage, handling, and installation of flagpoles to be installed in the project area indicated. Flagpoles shall be deluxe internal halyard fixed high dimensional, ground set, cone... |
| 1.2 RELATED WORK |
| A. NOT USED |
| 1.3 SUBMITTALS |
| A. Submit in accordance with Section 01 33 23, SHOP DRAWINGS, PRODUCT DATA, AND SAMPLES. |
| B. Shop Drawings: Flagpole details of all parts & accessories, and list of all materials, including but not limited to: base with support plate and grounding spike, lightning kit, pole, flash collar, revolving truck, internal halyard, cable assembly,... |
| C. Manufacturer's Literature and Data: Flagpole, base and all parts and accessories. |
| 1.4 APPLICABLE PUBLICATIONS |
| A. Publications listed below form a part of this specification to extent referenced. Publications are referenced in text by the basic designation only. Comply with applicable provisions and recommendations of the following, except as otherwise shown o... |
| B. American Society for Testing and Materials (ASTM): |
| A167-99 (R2009) Stainless and Heat-resisting Chromium-Nickel Steel Plate, Sheet and Strip |
| B209-10 Aluminum and Aluminum Alloy-Sheet and Plate |
| B241/B241M-12 Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| C. American National Standards Institute Inc. (ANSI): |
| ANSI/NAAMM 1001-97 Guide Specifications for Design of Metal Flagpoles Manual. |
| 1.5 QUALITY ASSURANCE |
| A. Manufacturer’s Qualifications: Firms regularly engaged in the manufacture of metal flagpoles and accessories, of types, size and configurations required, whose products have been satisfactory use in similar service for not less than 5 years. |
| B. Installer’s Qualifications: Firm with at least 3 years of successful installation experience on projects having flagpole installation work similar to that required for this project. |
| PART 2 - PRODUCTS |
| 2.1 MATERIALS |
| A. Aluminum, Extruded: ASTM B241, alloy 6063 - T6. |
| B. Aluminum, Plate and Sheet: ASTM B209, alloy ll00. |
| C. Stainless Steel: ASTM A167, Class 302 or 304. |
| 2.2 FABRICATION |
| A. Base: Aluminum plate or stainless steel, of stock design similar to that shown. |
| B. Finial Ball: 0.0747-inch-thick spun aluminum sphere, with seams of ball welded flush and watertight. Mount ball on threaded rod to fit truck. Diameter of ball shall be approximately same as pole diameter. |
| C. Truck: Equip pole with extra heavy, revolving, non-fouling, ball bearing type truck with cast aluminum body and designed to accept an ornament on top. |
| D. Halyards: Internal type cable assemblies. 1/8” and/or 3/16” stainless steel aircraft cable incorporating a stainless-steel swivel, upper cable section, and flag arrangement with cable and two stainless steel quick links and two stainless steel swi... |
| E. Beaded Retainer Ring and Counterweights: Provide as recommended by manufacturer based on the pole size, flag size and design wind velocity. Provide recommended connection accessories. |
| F. Internal Halyard Accessories: Furnish and install a gearless, self-locking at any point, direct drive winch that does not require welding for installation and does not require monthly application of lubrication and is attached to the pole with one... |
| G. Foundation Tube: Hot dipped galvanized corrugated steel tube. Tube shall have a steel base plate and centering wedges and support plate for connection of lightening kit. Bottom plate shall be a minimum of 3/16” thickness. |
| 2.3 FINISH |
| A. Finish exposed surfaces of flagpoles. |
| B. Flagpole shaft: Satin brushed aluminum, then heavily waxed. |
| C. Finial ball: Gold anodized aluminum, then heavily waxed. |
| D. Base: Finish to match flagpole. |
| PART 3 - EXECUTION |
| 3.1 INSPECTION |
| A. NOT USED |
| 3.2 PREPARATION |
| A. NOT USED |
| 3.3 INSTALLATION |
| A. NOT USED. |
| 3.4 LIGHTNING ROD |
| A. NOT USED |
| 3.5 Cleanup |
| A. After installation, carefully clean the flagpole and appurtenances, removing all dirt stains, and all other incident defacements. |
| 1. Fabricator should be contacted regarding the use of any cleaners and must approve of them before use. |
| 2. Protection of Finished Work: Flagpoles for this project shall be protected at all times during construction. |
B. Clean up area of excess material and debris.
File details come from the government source that posted it. Updated .