Attachment B _ Marine Board Platform Purchase Proposal - Marion CSO - Rogue.pdf
PDF 877 KB Posted
- Attached to
- RFP 21-035 Incident Management Software
- Solicitation number
- S-KS2410-00000984
- Issued by
- Marion County, Oregon
About this file
This is a Marine Board Platform Purchase Proposal submitted to the Marion County Sheriff's Office for the acquisition of a 22-foot center console inboard jet vessel with auxiliary outboard motor and associated equipment. The proposal, issued by Rogue Jet on July 30, 2021, includes detailed specifications for a law enforcement patrol boat designed for rapid response and shallow-water operations. The vessel specifications encompass hull requirements in 5086 aluminum with a 22-foot length, 102-inch beam, 14-degree bottom deadrise, and minimum bottom thickness of 0.250 inches, along with comprehensive requirements for the center console, seating configuration, propulsion system featuring an Indmar 6.2L Raptor 440 engine and Hamilton Jet 213 pump, and electrical systems. The proposal includes a commercial-duty aluminum trailer with dual torsion axles, surge disc brakes, and commercial-grade radial tires. Additionally, the proposal encompasses the integration of Marion County-supplied FireCom wireless communication systems and law enforcement radios, a Garmin EchoMap UHD 93sv marine electronics package, and extensive lighting systems including LED navigation and law enforcement lights. The quote was valid from August 12, 2021, through September 11, 2021, with shipping not included in the pricing.
The total cost for the marine vessel platform is $116,630, representing the government pricing for the fully equipped 2022 Fastwater model with all standard features, optional features, and integrations included. The proposal demonstrates compliance with ABYC, USCG, and NMMA standards and includes performance criteria specifications requiring the vessel to achieve 40 miles per hour with full load, carry 1,200 pounds on plane, and operate in as little as 4 inches of water. A separate FireCom communication system quote totaling $2,796.43 was provided under quote number 4283, which includes wireless radio units, base stations, digital intercom, and associated hardware with a 30-percent OSMB program discount applied. Contact points for the Marion County Sheriff's Office included Deputy Garrett Olson and Brian Paulsen of the Oregon State Marine Board, with orders directed to Sonetics Corporation. The proposal specifies a 10-year hull warranty and a minimum 3-year engine warranty upon delivery.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Customer Marion County Sheriff
Address 2845 Merry Lane
Phone White City, Oregon email 97503
Diagrams Specifications Garrett Olson Model Center Console Fastwater 22' "2022" golson@co.marion,or.us Length 22 feet
Beam 102" Brian Paulsen Side Height 30 inches brian.paulsen@oregon.gov Bottom Width 78"
Deadrise 14 degree Tapered Radius Fuel Capacity 80 Gallon
5086 alloy sides, transom, bottom Standard Power FORD "Raptor" 6.2 Standard Pump Hamilton 213 with turbo impeller 6 lifting/turning strakes Heavy duty Side Thickness 0.125 Bottom Thickness 0.250 Transom Thickness 0.190 Box Girder Thickness 0.160
Boat Color NO Optional Features (and Deducts) color powder coat Government Pricing "2022" 116,630$ canvas X wide CC Catalytic exhaust manifolds incl.
upholstery color Super welded "T" top to gunnels, slant forward windshield, welded incl.
carpet color grab handles, roof railing, light bar welded on roof incl.
Graphics 2 interior dome lights-red/white one forward of windshield incl.
Name Plaque Storage box seat forward of C.C. with cushion/back rest, side grab incl.
Standard Features handles, beveled corners incl.
"Guardian welded Aluminum tandem axle trailer- Law enforcement 2/3 swim platform with hooks and grab handles-32" incl.
Disc surge brakes both axles (above platform 3"- 4" higher than normal location incl.
with UHMW bunks and side guides Custom rack and pinion steering system 3/4 turn lock to lock incl.
LED lights including LED back up lights Custom billet throttle/shift system single lever incl.
15" radial tires and wheels Custom billet intake base for jet drive incl.
"Vault" oil bath bearings Diamond plate or non skid on gunnels where boarding incl.
spare tire, wheel and mount Move Center console forward to accommodate SHOX seat incl.
15X225 10 ply radials Intake cleanout system (stomp grate) incl.
Aluminum rims 3 welded 8" cleats each side of gunnel w/backing plates incl.
Sand Trap/sea water strainer incl.
Heater/defroster system 3 vents, 2 dash, one towards operator incl.
Radio compartment above windshield w/lockable door incl.
Horn 2 recessed cup holders on dash incl.
Navigation Lights 2 compartments at bow with springs holding doors up incl.
Dual heavy duty marine batteries + Switch AGM 1 SHOX seat 3700 forward/aftheight adj. incl.
2 Bilge Pumps and auto switch (2,000 gal.) 2 - 18X30" storage boxes w/cushions and beveled corners-lockable incl.
Bilge Blower Sea Dek on top of engine cover incl.
12 volt Power Point 1/4"X30"wideX60" long overlay from transom forward incl.
Wash down pump system incl.
Water Separator Welded fold down swim ladder - starboard incl.
Instrument Panel - Fuel, hours, volts, temp, Storage compartment with cushion in front of C.C. incl.
oil pressure, with oil/temp alarm system Panoramic windshield wiper incl.
Motor box insulation - latches each side Boat Serial # RQJT
Engine Serial # Jet Serial #
Diamond Plate (step deck, trim, fore deck) Trailer serial # Engine Heat Exchanger 5 lb. fire extinguisher mounted incl.
Garmin #010-02523-01 9" lakeVu Ge GT56UHD transducer installed incl.
tapered radius performance bottom w/six 2 USB ports one each side of dash incl.
lifting/turning strakes Battery maintenance charger incl.
Welded diamond plate swim board Welded transom tow bit incl.
Heavy duty bracing around engine and jet Removable bow tow post off set from center incl.
Transducer bracket Jumper cables located at bow w/switch at dash incl.
6 heavy duty lifting/turning strakes Port zinc anode at transom incl.
SeaDek 5mm in side trays-storm grey and dash incl.
Dierks bow anchor roller with jam cleat bolt on incl.
Port Yamaha 25 h.p. tiller, power trim, fuel Inj. With elec. And fuel incl.
connections and separate water seperating fuel filter incl.
larger kicker pocket for larger engine incl.
Zinc anode port incl.
Install Marion's Fire Com system incl.
Install Marion's police radios and antennas incl.
18" LED strips located under gunnells 3 each side incl.
8 LED blue law enforcement lights on "T" top 2 each side incl.
Siren, light controller, speaker, w/dash controls and hand mic incl.
Bow 20" LED removable light bar with switch at dash incl.
TOTAL 116,630$
Rogue Jet Signature Customer Signature motor box cusion
7/30/2021 3:45 PM Marion Co. Sheriff (002)
Attachment B mailto:golson@co.marion,or.us mailto:golson@co.marion,or.us mailto:brian.paulsen@oregon.gov mailto:brian.paulsen@oregon.gov
Quote #4283
Date: 8/12/2021
Expires: 9/11/2021 17600 SW 65th Ave Lake Oswego OR 97035 United States
Ph: (503) 684-6647 Fax: (503) 620-2943 www.firecom.com
The quote total may not reflect freight or sales tax charges. Amounts are in $USD.
Please send your purchase order(s) to orders@soneticscorp.com
ATTENTION SALES REP
Brian Paulsen Brian.Paulsen@oregon.gov 503-378-2610
Phil Crowder phil.crowder@soneticscorp.com 5036083417
BILL TO SHIP TO
Deputy Garrett Olson Marion County Sheriff's Office 100 High St NE Salem OR 97301 United States
Deputy Garrett Olson Marion County Sheriff's Office 100 High St NE Salem OR 97301 United States
Memo: For Marion County Sheriff's Office - Shipping Not Included
ITEM QUANTITY PRICE AMOUNT
UHW505
RADIO TRANSMIT UH, DECT7, HEAD
2 $795.00 $1,590.00
WB505R
WIRELESS BASE STATION 5-USER RADIO TRANSMIT
1 $1,195.00 $1,195.00
5100D DIGITAL INTERCOM 1 RADIO Firecom GA
1 $995.00 $995.00
MR-CABLE
MR-CABLE (To be determined) Place holder for MR-CABLE TBD
1 $195.00 $195.00
108-0678-00
HANGER HOOK, YELLOW NFPA FOR HEADSET
2 $9.95 $19.90
OSMB Program OSMB Program Discount
-30% ($1,198.47)
Subtotal $2,796.43 Total Tax (0%) $0.00
Total $2,796.43
Attachment B https://www.firecom.com mailto:orders@soneticscorp.com mailto:Brian.Paulsen@oregon.gov mailto:phil.crowder@soneticscorp.com
REQUEST FOR QUOTATION - MARINE LAW ENFORCEMENT VESSEL SPECIFICATION SHEET
Agency: Marion County Sheriff's Office Agency Contact: Garrett Olson (golson@co.marion.or.us)
Propulsion: Inboard Jet, Auxiliary Outboard OSMB Contact: Brian Paulsen (brian.paulsen@oregon.gov)
Configuration: Center Console T-Top Request For Quotation Deadline: 15 days from request
Specifications Item X Details
HULL REQUIREMENTS Note: Quoter shall mark each item to acknowledge specification.
Length: 22' 1.11 Not to include swim step
Beam: 102" 1.12
Bottom Dead Rise 1.13 10 - 14 degree
Side Height: 30" 1.14 Minimum
Bottom Thickness: .250 1.15 Minimum, 5086 Aluminum
Side Thickness: .125 1.16 Minimum, 5086 Aluminum
Transom Thickness: .190 1.17 Minimum, 5086 Aluminum
Strakes/Chines: 4 - 6 1.18 Full continuous welds
Box Girder Thickness: .160 1.19 Minimum
Longitudinal Supports: 2 Per Side 1.20 Minimum
Keel Protection 1.21 Reinforced .250 X 2" 5086 extrusion
Bottom Overlay 1.22 Bottom doubler to 1/2"; .250 forward of pump intake 48" - 60"
Intake Overlay 1.23 3/4" x 3" 6061 T-6 intake overlay OR billet intake block
Gunnels: 5" 1.24 Minimum, reinforced non skid step for boarding on each side
Swim Deck: 2/3 transom width, 30" deck length 1.25 Diamond plate with painted top surface OR non skid flat surface.
Swim Deck: Grab Handles 1.26 Welded to transom and swim deck
Folding Boarding Ladder 1.27 Starboard Side
Stainless Steel Fasteners & Hardware 1.28
Low Profile Tow Post On Bow 1.29 Removable 8" Tall - offset from bow anchor roller/cleat (1.43)
Low Profile Tow Post On Transom 1.30 Fixed - 10" Tall - reinforced backing plate
Welded 8" cleats with backing plates 1.31 6 Total - 3 per side
Dual row deep storage compartment in bow 1.32 Self holding open hinged lids and flush mounted latches, water tight
Deck Storage Surface 1.33 Painted diamond plate or flat non skid.
Row One Storage Compartment 1.34 Suitable for anchor and rope storage
Row Two Storage Compartment 1.35 Suitable for storage of removable (1.29) and (6.16) - storage ports
2 Welded Bow Eyes 1.36 Suitable for trailer winch and safety chain
1 Welded Stern Eye On Each Side of the Transom 1.37 Suitable for attaching transom straps for towing
Two Welded Transducer Brackets 1.38 One mounted on each side of transom
Attachment B
Paint: PPG AUE-360 (no zolotone) 1.39 Agency to specify color and surfaces to be painted.
Non-Skid Deck Flooring 1.40 Commercial Grade
Zinc Anode - Bolt On Style 1.41 Bolted to port side transducer bracket
Gunnel Trays 1.42 SeaDek Embossed 5mm sheet material - Storm Gray
Bow Anchor Roller w/ Jam Cleat - (Bolt On) 1.43 Dierks SR42 (Bolt On)
1” drain hole to exterior through the transom 1.44 Heavy duty drain tube
Recessed auxiliary motor well on port transom 1.45 Designed for 25" Shaft, permanent installation
CENTER CONSOLE
Welded 5052 Aluminum Console 2.11 Extended T-Top - Gunnel to Gunnel - Welded
Grab Handles on Each Side of Console 2.12 Welded
Fixed Windshield - Laminated Safety Glass 2.13
T-Top Roof Construction 2.14 Aluminum - Attachment Points and Railing Grab Handles
Heavy Duty Marine Heater/Defogger 2.15 3 vents minimum - one on each side of dash, other(s) toward operator
Radio Compartment - self holding hatch when open 2.16 Attached to T-Top, suitable for 3 radio units minimum, lockable
Dash Top Surface 2.17 SeaDek Embossed 5mm sheet material - Storm Gray
Cup Holders 2.18 2 - recessed/flush mount on dash top surface, one on each side
Hatches and Compartments 2.19 Waterproof seals
SEATING
Operator: Shoxs 3700 seat - Shoxs X4 pedestal 3.11 Forward/Aft Slider, Height Adjustment, Standard Armrest, Grey Upholstery
Full Width Cushioned Seat Box Forward of Console 3.12 Back cushion, side grab handles, lockable, beveled corners toward (3.13)
Additional: 2 - Cushioned bench seats w/ grab handles 3.13 Lockable aluminum storage box, beveled corners toward center console
PROPULSION
Engine: Indmar 6.2L Raptor 440 4.11 Commercial Duty Service Driveline
Pump: Hamilton Jet 213 4.12 3.4 kW Impeller
Throttle - Bucket Controls 4.13 Flow-Tec Single Lever Control
Sea Strainer 4.14 Easily Accessible For Service
Oil Drain Kit 4.15
Stomp Grate 4.16
Hinged Aluminum Engine Cover 4.17 Opens toward aft, beveled forward corners
Sound Proofing Inside Engine Cover 4.18 Top of engine box - SeaDek Embossed 5mm sheet material - Storm Gray
Cover Provides Easy Access To Engine 4.19 Dog house style design, latch on each side to secure.
Fuel Tank: 70 Gallon 4.20 Minimum Size - USCG/EPA Approved Mounted Under Floor
Auxiliary Motor: Yamaha T25XWTC 4.21 Bolted, fuel water separator, fuel line to main tank, prop guard installed
ELECTRICAL
Electrical System: 12 volt Negative Ground 5.11
Dual Batteries with Selector Switch 5.12 AGM, selector switch in easily accessible location
Batteries Secured in Transom 5.13 All battery terminals covered
Marine Battery Maintenance Charger 5.14 Plug in port near battery selector switch
Lighted Instrumentation 5.15 Oil pressure, temperature, fuel, volts, hour meter, tachometer
All Electrical Shall Comply with ABYC Standards 5.16 Fuses and resets easily accessible
Combination Dual USB - 12V Receptacles w/ covers 5.17 2 Total - one on each side of dash face
No Exposed Wires or Cables 5.18
Bilge Blower 5.19 Switched at Console - Meets or Exceeds USCG Requirements
Jumper Cable - Light Accessory (6.16) - Anderson Plug 5.20 Located in bow - switch located at console for on/off
FireCom 5.21 Install County Supplied FireCom Wireless System inside (2.16)
Law Enforcement Radios 5.22 Install County Supplied Law Enforcement Radio inside (2.16)
MFD: GARMIN ECHOMAP UHD 93sv 5.23 Garmin PN: 010-02523-01 (9", LakeVu G3, GT56UHD-TM, UHD S/C/TC)
MFD & Transducer 5.24 MFD off centered on (2.17) to starboard,transducer installed starboard (1.38)
LIGHTING
Deck Lights 6.11 18" LED strips located under gunnel - 6 total - 3 per side
1 Dome Light Interior 6.12 Red/White Combo
USCG Approved LED Navigation Lights 6.13
Blue Law Enforcement LED Lights 6.14 8 Total on T-Top: 2 front, 2 on each side, 2 rear
Siren Box, Light Controller and Public Address w/ Speaker 6.15 Installed with Dash Mounted Switches & Hand Mic
Removable front Light Post, Must be stowable in (1.35) 6.16 20" Marine Dual Row LED Light Bar Installed On Post w/ Anderson Plug
OTHER EQUIPMENT
Wash Down Pump 7.11 Rear Mounted
Electric Horn 7.12
Single Pantograph Windshield Wiper 7.13 Commercial Grade - Top Mounted
Two 2000 GPH Bilge Pumps 7.14 1 Auto, 1 Manual - wired separately - "Auto" always powered
Rack and Pinion Steering 7.15 FlowTech (3/4 Turn Lock to Lock)
SeaDek Embossed 5mm sheet material - Gray 7.16 Gunnel trays, dash surfaces and top of engine box.
Fire Extinguisher Storage 7.17 Mounted 5 lb. ABC Extinguisher - USCG Approved Bracket
Manuals 7.18
Instructional Time 7.19
10 Year Hull Warranty 7.20 Minimum
3 year Engine Warranty 7.21 Minimum
Warranty Forms Upon Delivery 7.22
MSOs Upon Delivery 7.23
BOAT TRAILER
Commercial Duty Trailer - Welded 8.11 Aluminum or Galvanized, no bolt together
2 inch Coupler 8.12
Dual - Torsion Axles 8.13
Surge Disc Brakes - both axles 8.14
UHMW Bunks/Side Guides 8.15
Dual Wheel 1,500 lbs. Tongue Jack 8.16
Commercial Grade Radial 15" Tires 8.17 ST225/75R15 LRE
Matching Spare Tire and Wheel 8.18 Black Aluminum Wheels
Trailer tongue and winch step for boarding 8.19
LED Marine DOT Lights 8.20
Sealed Oil Bath Wheel Bearings - Vault Gel System 8.21
Round RV Seven Prong Plug 8.22
Fenders and Steps 8.23 Heavy Duty - Constructed of Aluminum or Galvanized Steel
Heavy Duty Winch and Nylon Strap To Bow 8.24
Heavy Duty Bow/Trailer Safety Chain 8.25
Two Heavy Duty Trailer/Transom Straps 8.26 Boat Buckle F14256 - Stainless Steel G2
Two Heavy Duty Trailer/Vehicle Coiled Cables 8.27
Trailer VIN 8.28
PERFORMANCE CRITERIA
Capable of 40 MPH with full load 9.11
Ability to carry 1,200 lbs. on plane 9.12
Capable of running in 4 inches of water on a full plane 9.13
ABYC, USCG, and NMMA Standards 9.14 Boat and trailer must meet all standards
Swim Deck Height When Fully Loaded In Reverse 9.15 Must stay above waterline when operating upstream in moderate current
| Marine Board Platform Purchase Proposal - Marion CSO |
| Quote - Rogue Jet - Marion CSO - 07.30.21 |
| Retail |
| MarionCountySO_Firecom_Quote4283 |
| Marion CSO - Specifications - 22' CC - Inboard Jet |
File details come from the government source that posted it. Updated .