Attachment-A-Station Ft Macon PA Install-Hardware Specifications.pdf

ATTACHMENT A

Public Address Hardware Specifications

1. Telephone Paging Amplifier 60-Watt or 100-Watt: Bogen Models TPU-60, TPU-100 or equivalent. Description:

60-watt or 100-watt amplifier Inputs for 600-ohm balanced telephone line, Lo-Z balanced microphone, and background music Music input (RCA jack or screw terminals) Integral automatic level control (ALC) circuit for controlling pages made by persons with varying voice levels and paging techniques Page from telephone and/or microphone Signal-activated paging channel automatically mutes background music Adjustable background music muting level during a page Music gradually returns to its normal level after a page Audio Enhancement circuit increases intelligibility, improves perceived loudness

(with no increase in power), and reduces listener fatigue Separate controls for page volume, music volume, night ringer, music mute, and

Audio Enhancement Bass and treble controls Built-in night ringer activated by contact closure or by 90V ring signal Balanced or unbalanced 16-ohm, 25V, 25V CT, and 70V outputs are available VOX sensitivity level control eliminates accidental transmission of background noise from a paging telephone Thermal and electronic overload protection Jacks provided for bridging additional amplifiers Brackets are attached to each model for easy wall mounting; Can also be rack-mounted with optional brackets.

Peak level indicator lights when amplifier is driven into clipping 120V AC, 60 Hz power source Listed to UL Standard 60065 for U.S. & Canada

2. Telephone Paging Central Processing Unit (CPU), Zone Module (ZPM) and Telephone Interface Module (TIM): Bogen Models PCMCPU or equivalent, PCMZPM or equivalent, PCMTIM or equivalent. Description:

1 to 99 paging zones and up to 32 programmable paging groups.

Emergency All-Zone override paging input.

250W power handling capacity (separate amplifier required) Operates with 70V and self-amplified (24V) paging systems Select zones or groups for background music, night ringer, code calling, tones & talkback Telephone interface allowing the use of loop or ground start trunks, page ports and analog extensions.

Field programmable using DTMF Background music by zone or local input CPU modules and zone groups served by individual power supplies

3. Power Mixer/Pre-Amplifier with Mono Auxiliary input, Tone Generator, and Relay input/output: Bogen Vector Model VMIX with MAX1R, TNG1S, & RIO1 or equivalent.

Description:

8 module input bays, accepts up to 2 signal-processing output modules or up to 8 input modules.

Four priority levels Rack mountable (with optional kit) Output level meter with Average/Peak switch Gain/trim control Bass & treble controls Variable ducking level when muted Fade back from mute RCA connector Select 4 of 8 tones to trigger generator Burst/steady, slow whoop, siren, mechanical bell, klaxon, night ringer, double chime, and doorbell tones.

Momentary and continuous playback modes.

Screw terminal trigger connections Level control Microprocessor-controlled operation Transformer-isolated, balanced line-level input 600-ohm or 10k jumper selectable input impedance Transformer-isolated, balanced line-level output 8-ohm, 750mW output Input & Output level controls Normally Open or Normally Closed relay contacts

4. Dual-Balanced Input Module for Microphone input to Mixer, Bogen model BAL2S or equivalent. Description:

Stereo, high-impedance, balanced inputs Low-noise Selectable gain 0dB or 18dB Compatible with telephone system page ports Variable ducking level when muted Fade back from mute Screw terminals

5. Interior Box Speaker with volume control, Bogen Model WBS87T25BRV or equivalent.

Description:

4-watt capacity 6 power taps available (4, 2, 1, 1/2, 1/4, 1/8 watts) Works with both 70V and 25V amplifier outputs 8" cone speaker 6 oz. or 10 oz. magnet weights Recessed volume control Screw terminals

6. Outdoor 15W horn speaker with wattage adjustment, Bogen model SPT15 or equivalent.

Description:

Weatherproof, all-metal construction 15 watts; 25/70 volt Tap settings for 70V: 15, 7.5, 3.8, 1.8, 0.9 watts; for 25V: 15, 7.5, 1.8, 0.94, 0.46 watts Rotary tap impedance selector Tilt and swivel base Screw terminals All-purpose mounting bracket Self-aligning, field replaceable diaphragm

7. Interior flush-mount speakers, Bogen model with volume control S86T725PG8WBRVK or equivalent. Description:

4-watt capacity 8" cone speaker 6 different power taps (4, 2, 1, 1/2, 1/4, 1/8 W) T725 4-watt transformer Off-white enamel over steel grill Works with both 70V and 25V amplifier outputs volume control – recessed or with knob Screw terminals 6 oz. or 10 oz. magnet weights

8. Interior surface-mount speakers, Bogen model with volume control SM4T or equivalent.

Description:

4-watt capacity Simple, easy and quick install, less than 1 minute with no tools.

5 different power taps (4, 2, 1, 1/2, 1/4 W) Built-in T725 4-watt transformer Lightweight durable plastic shell with off-white finish Works with both 70V and 25V amplifier outputs Wire wound volume control on outside of speaker for easy access Wire nut terminals Drop ceiling mounting hardware included with optional tile bridge if needed

9. Single pair 2/18 non-plenum shielded speaker wire, Belden model 2C18FS-CMR-GY-B- BED or equivalent. Description:

Two 18AWG bare copper conductors PVC insulation and jacket material Foil Shield with braid and drain wire

10. Desktop Paging Microphone, Bogen model MBS1000a or equivalent. Description:

Cardioid pickup pattern

Locking mechanism with push-to-talk bar Impedance: Hi-Z, 50k ohms; Lo-Z 500 ohms Frequency response range 45 Hz to 15 kHz Sensitivity: Hi-Z -52dB +/- 3dB; Lo-Z -72 dB +/- 3dB

11. Matching transformer, Bogen model WMT1a or equivalent. Description:

Hi-Z, 10k-ohm primary impedance Lo-Z, 600-ohm secondary impedance, balanced with center tap Matches high-to-low impedance or low-to-high impedance Adapts line-level signals to microphone inputs RCA connector for Hi-Z side Screw terminals for Lo-Z side Small steel enclosure w/ mounting ears

12. VoIP Gateways for Paging, Bogen models MVP130 (single port), MVP210 (two port), MVP410 (4 port) and MVP810 (8 port) or equivalent. Description:

1, 2, 4 or 8 analog ports for communications over existing IP networks or the internet Ethernet connectivity and full IP compatibility with existing routers and WAN infrastructures Overhead voice paging to multiple locations within a facility, branch buildings or remote locations Simple configuration and management using a web browser or Microsoft Window’s Utilizes H.323 or SIP protocols to provide complete interoperability with other internet telephony solutions Single Port Protocol (SPP) allows the use of dynamic IP addresses

13. Digital Feedback Terminators (DFT), Bogen model DFT120 or equivalent. Description:

Up to 240 seconds of high quality recording Record a message while another is being played, stacking up to 16 messages for playback Loop start or dry loop input modes Adjustable time delay between messages Regeneration of DTMF tones Message repeat function Pre-page tone available Unit status LED’s indicating in-use, play and record states 8 or 600 ohm output

14. Voice Activated Relay (VAR), Bogen model VAR1m or equivalent. Description:

Double pole / double throw relay activated by audio signal Input selection of microphone, 600 ohm, 25V or 70V Voice Activation (VOX) detect circuit Adjustments for sensitivity, volume and delay External 12-24V DC power source Two make / brake relays for optional external hardware activation

15. Attenuators with Bypass for 25/70V Speaker line, Bogen models ATP10 or ATP35 or equivalent. Description:

Allows output of 25 or 70 volt amplifier signal to speakers to be controlled by wall mounted volume control without affecting the overall amplifier volume setting

Bypass option for emergency announcements Control 10 watt or 35 watt as needed 10 attenuation steps at 3db each and off Mounts in a single or double electrical box

16. Touch Tone Relay, Viking Electronics model RC-3 or equivalent. Description:

User Touch Tone programmable 6 digit security code (to access programming) 6 digit access code (disable or enable for additional control security) Switchable 12V talk battery Relay interrogation tones Programmable relay time delays Cascade up to three RC-3’s to control up to nine relays Programmable ring delay before answering Status LED’s for relays 1, 2, 3 and the answer relay Power: 120V AC/12V DC 500mA UL listed adapter provided Pulse Dialing Speed: 10 pps Talk Battery Output: 12V DC minimum (15V nominal) Relay contact ratings: .5A @ 125V AC/1A @ 30V DC On hook time between alarm dialing: 2.5 seconds Connections: (2) RJ11 jacks, 10 position screw terminal strip

17. Remote Access Device, Viking Electronics model RAD-1 or equivalent. Description:

Programmable 6 digit security code Two programmable levels of access Programmable toll restriction Allows 1-800, 1-888 and 911 calls Disconnects on CPC, call time out, toll restriction, or by dialing #7 Programmable 5 second to 50 minute call timer Provides a 500ms hook switch flash to access features on PABX, Centrex, C.O. lines Provides a 2 second disconnect for new calls Bridges any loop start/ground start line or analog PABX station to a 600 ohm audio input Auxiliary contacts for systems that need a dry contact closure Non-volatile memory (no batteries required) with security Telephone Line Powered (24V DC 20mA minimum) Relay Contact Ratings: 220V AC/DC @ 1 Amp resistive Audio Loss (through unit): 1 dB Connections: (2) RJ11 modular jacks, five position screw terminal strip