Attachment 7.pdf
PDF 212 KB Posted
- Attached to
- Cap / Flat / Hex head screws
- Solicitation number
- SPMYM326Q9002
About this file
This is an FSC 5305 contract attachment (Section B) for a Hex Head Self-Locking Capscrew with Stock Number 5305-LL-D00-0352, digitally signed by Steve Harmon on April 14, 2026.
The contract specifies a MIL-DTL-1222J Type I self-locking IAW MIL-DTL-18240F(1) Type L capscrew, Class A, 0.625-11UNC-2A X 2,000, per Drawing 6160946, Revision C, with locking strip detail 2-4A. Standard commercial packaging applies per Section D2.2. Inspection and acceptance occur at destination with constructive acceptance period provisions per FAR 52.246-1, E-2, and E504. The contract references PNS Standard Clauses C500 (Mercury Exclusion) and C524 (Marking & Certification Requirements), along with standard FAR contractor inspection requirements and special provisions for threaded products under Clause H500.
The contract requires two data items: (1) Certificate of Compliance (DI-MISC-81356A, Data Item A001) certifying quality compliance, and (2) Certification Data/Report (DI-MISC-82386, Data Item A002) containing actual chemical and mechanical test results with quantitative data in specification-required units. Both items must be submitted with material under separate shipment numbers. Fastener certification must demonstrate testing of the correct number of specimens, with new untested fasteners required for wedge tensile and yield strength testing. The requiring office is Code 245, with distribution to Code 133.2.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1.pdf | ||
| Security Agreement For NNPI.pdf | ||
| Attachment 3.pdf | ||
| Attachment 6.pdf | ||
| Combined Synopsis Solicitation SPMYM326Q9002.pdf | ||
| Attachment 2.pdf | ||
| Attachment 5.pdf | ||
| Attachment 4.pdf | ||
| RFQ SPMYM326Q9002.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs & of DI-MISC- do not apply.
2.
3.
Technical content as described in the respective contract line item(s).
This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification The Test results shall be quantitative & in the units required by the specification.
For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
In addition to the Certification Data requirements specified in DI- MISC- , the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .