Attachment 3.pdf
PDF 197 KB Posted
- Attached to
- Cap / Flat / Hex head screws
- Solicitation number
- SPMYM326Q9002
About this file
Summary of FSC 5305 Contract Attachment Section B
This is a federal contract data sheet for a Flat Head Machine Screw (Stock Number 5305-LL-D00-0356). The item specification is FF-S-92E(1), TYPE III (DESIGN 1), STYLE 2C, NICU QQ-N-281D(2), CLASS A, with dimensions of 0.500-13UNC-2A X 2.250. The contract incorporates PNS Standard Clauses C500 (Mercury Exclusion) and C524 (Marking & Certification Requirements). Standard commercial packaging applies per Section D, and inspection and acceptance occur at destination with provisions for constructive acceptance per FAR 52.246-1, E-2, and E504. The material is classified as Non-Level-1 under Section G, and Special Provisions for Threaded Products per Standard Clause H500 apply.
The contract requires two data items from the contractor, both submitted with material on a one-time basis. Data Item A001 is a Certificate of Compliance certifying quality compliance per DI-MISC-81356A. Data Item A002 is a Certification Data/Report documenting chemical and mechanical certification per DI-MISC-82386, requiring actual quantitative test results in specification-required units, evidence of correct specimen testing, and new untested fasteners for wedge tensile and yield strength testing. Both data items must be submitted to CODE 245 (Requiring Office) under separate shipment numbers for payment processing, with one final copy required for each item and one regulatory/reproduction copy.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 2.pdf | ||
| Attachment 5.pdf | ||
| Attachment 4.pdf | ||
| RFQ SPMYM326Q9002.pdf | ||
| Attachment 6.pdf | ||
| Combined Synopsis Solicitation SPMYM326Q9002.pdf | ||
| Attachment 1.pdf | ||
| Attachment 7.pdf | ||
| Security Agreement For NNPI.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
SCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs & of DI-MISC- do not apply.
2.
3.
Technical content as described in the respective contract line item(s).
This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification The Test results shall be quantitative & in the units required by the specification.
For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
In addition to the Certification Data requirements specified in DI- MISC- , the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .