Attachment 2.pdf
PDF 209 KB Posted
- Attached to
- Cap / Flat / Hex head screws
- Solicitation number
- SPMYM326Q9002
About this file
This is a federal contract document (FSC 5305) for the procurement of Socket Flat Head Self-Locking Capscrews. The contract specifies the item as FF-S-86J Type IV self-locking IAW MIL-DTL-18240F(1), Type L or P, Nicual QQ-N-286G, annealed and age hardened, sized 0.625-11UNC-3A X 1.500. Stock Number 5305-LL-D00-0357 is assigned to this item.
The contract includes two data items required from the contractor: (1) Data Item A001 – Certificate of Compliance (DI-MISC-81356A) certifying quality compliance, and (2) Data Item A002 – Certification Data/Report (DI-MISC-82386) containing chemical and mechanical certification with actual test results. Both data items must be submitted with the material on a one-time basis under separate shipment numbers. The certification data must include quantitative test results in specification-required units, evidence of correct specimen testing, new untested fasteners for wedge tensile and yield strength testing, and compliance with controlled industrial material marking and certification requirements. Standard commercial packaging applies, and inspection and acceptance occur at destination. Applicable clauses include PNS Standard Clauses C500 (Mercury Exclusion), C524 (Marking & Certification), and C531 (K-Monel Material Restrictions), along with FAR 52.246-1 (Contractor Inspection Requirements) and other standard inspection and acceptance provisions.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 1.pdf | ||
| Attachment 7.pdf | ||
| Security Agreement For NNPI.pdf | ||
| Attachment 3.pdf | ||
| Attachment 6.pdf | ||
| Combined Synopsis Solicitation SPMYM326Q9002.pdf | ||
| Attachment 5.pdf | ||
| Attachment 4.pdf | ||
| RFQ SPMYM326Q9002.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs & of DI-MISC- do not apply.
2.
3.
Technical content as described in the respective contract line item(s).
This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification The Test results shall be quantitative & in the units required by the specification.
For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
In addition to the Certification Data requirements specified in DI- MISC- , the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .