Attachment 1.pdf
PDF 213 KB Posted
- Attached to
- Cap / Flat / Hex head screws
- Solicitation number
- SPMYM326Q9002
About this file
FSC 5305 Contract Attachment B Summary
This is a federal contract specification document for a Flat Socket Head Self-Locking Capscrew (Stock Number 5305-LL-D00-0366). The item is specified as FF-S-86(MOD) TY-IV self-locking internal assembly wrench per MIL-DTL-18240F(1), available in Type I or Type P, nickel QQ-N-286G annealed and age hardened in size 0.625-11UNC-3A X 2.250. Lot numbers are required to be marked on the heads per specification requirements.
The contract incorporates PNS Standard Clauses C500 (Mercury Exclusion), C524 (Marking & Certification Requirements), and C531 (Restrictions on K-Monel Material). Standard commercial packaging practices apply, and contractor inspection requirements per FAR 52.246-1 with inspection and acceptance at destination (E-2) and notice of constructive acceptance period (E504) are required. The contract specifies two data items for submission with material: (1) Certificate of Compliance (DI-MISC-81356A) certifying quality compliance and (2) Certification Data/Report (DI-MISC-82386) containing actual chemical and mechanical test results with quantitative measurements in specification-required units. Both data items require submission one time with material under separate shipment numbers, with distribution to Code 245 requiring office. Special provisions for threaded products (H500) apply, and material classification is non-Level 1.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Attachment 7.pdf | ||
| Security Agreement For NNPI.pdf | ||
| Attachment 2.pdf | ||
| Attachment 5.pdf | ||
| Attachment 4.pdf | ||
| RFQ SPMYM326Q9002.pdf | ||
| Attachment 3.pdf | ||
| Attachment 6.pdf | ||
| Combined Synopsis Solicitation SPMYM326Q9002.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONTRACT DATA REQUIREMENTS LIST
(2 DATA ITEMS)
A. CONTRACT LINE ITEM NO. B. EXHIBIT
A
C. CATEGORY
TDP TM ______ OTHER______
D. SYSTEM/ITEM
CAPSCREW
E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO.
A001
2. TITLE of DATA ITEM
CERTIFICATE OF COMPLIANCE
3. SUBTITLE
CERTIFICATION OF QUALITY
COMPLIANCE
4. AUTHORITY(DATA Item Description Number)
DI-MISC-81356A
5. CONTRACT REFERENCE
SECTION C. 2
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Technical content as described in the respective contract line item(s).
2. For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
0 0 0
15. TOTAL 0 1 0
1.DATA ITEM NO.
A002
2 TITLE of DATA ITEM
CERTIFICATION DATA / REPORT
3. SUBTITLE
CHEMICAL & MECHANICAL CERTIFICATION
4. AUTHORITY
DI-MISC-
5. CONTRACT REFERENCE
SECTION C. 3
6. REQUIRING OFFICE
CODE 245
7. DD 250 REQ
DD
9. DIST
STATEMENT
REQUIRED
A
10. FREQUENCY
One Time
12. DATE OF 1st
SUBMISSION
With Material
14. DISTRIBUTION
a. ADDRESSEE b. COPIES
DRAFT FINAL
8. APP. CODE
N/A
11. AS OF DATE
N/A
13. DATE OF
SUBSEQUENT
SUBMISSION
N/A
REG REPRO
133.2 0 1 0
16 REMARKS
1. Paragraphs & of DI-MISC- do not apply.
2.
3.
Technical content as described in the respective contract line item(s).
This certification shall contain the actual Test results of all Chemical & Mechanical Test required by the Specification The Test results shall be quantitative & in the units required by the specification.
For Payment & Submission of Data refer to Clauses 252.232-7006 & 252.232-7003 or 52.232-36. Each Data Item Submitted by Vendor must be Submitted under a Separate Shipment Number.
Fastener certification shall show evidence of testing of the correct number of specimens, new untested fasteners are required for each test where wedge tensile testing and yield strength testing are required.
In addition to the Certification Data requirements specified in DI- MISC- , the requirements of the contract section titled, Marking and Certification requirements for Controlled Industrial Material” apply.
0 0 0
15. TOTAL 0 1 0
G. PREPARED BY H. DATE I. APPROVED BY 245.2
X
J. DATE
File details come from the government source that posted it. Updated .