Attachment 6_Requirements Acceptability Checklist_V1.xlsx
XLSX spreadsheet 130 KB Posted
- Attached to
- Air Force Security Forces Non-Fire Resistant Combat Shirt Federal contract opportunity
- Solicitation number
- FA805422R0001
View the file
Other files for this federal contract opportunity
Show all 25
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SFCS Acceptability Checklist
| Non-Fire Resistant Combat Shirt Requirements Acceptability Checklist | |
| TO ENSURE YOU SEE ENTIRE REQUIREMENT, VERIFY THE REQUIREMENT BY LOOKING AT IT IN THE FORMULA BAR JUST BELOW MICROSOFT EXCEL WINDOW ABOVE |
INSTRUCTIONS:
SECTION A: ALL OFFERORS must complete yellow highlighted cells in ROWs 5, 6, 7, 8 and 9.
| SECTION B: ENTER A RESPONSE IN EVERY CORRESPONDING YELLOW CELL IN ROWs 12 through 38. Failure to respond to every requirement (i.e. a yellow cell is blank) will result in an UNACCEPTABLE determination. | Acceptable/Unacceptable | Rationale for Unacceptable Score | ||
| SECTION A | ||||
| Category | SECTION A | |||
| Offeror Information (OI) and Berry Amendment Certification | ||||
| OI 1.1 | Offeror Name | |||
| OI 1.2 | Offeror Address | |||
| OI 1.3 | Point of Contact Name | |||
| OI 1.4 | POC email & phone | |||
| OI 1.5 | Offeror certifies that all proposed Non-Fire Resistant Combat Shirt samples are Berry Amendment Compliant. In addition, certifies that all Non-Fire Resistant Combat Shirt items delivered over the period of performance of the contract will be Berry Amendment Compliant (ref DFARS 252.225-7012) Enter "Yes" or "No" -----> | |||
| SECTION B | ||||
| Category | SECTION B |
Provide reference for literature submitted to substantiate proof that proposal meets requirement (specify document name and location/page number within document, as appropriate).
FAILURE TO COMPLETE EVERY YELLOW CELL WILL RESULT IN A TECHNICAL ASSESSMENT OF "UNACCEPTABLE"
Manufacturer and Product Information (MaPI) for Security Forces Non-Fire Resistant Combat Shirt - CLIN # 0001-0014
| MaPI 1.1 | Manufacturer Name |
| MaPI 1.2 | Product Name |
| MaPI 1.3 | Manufacturer Part Number for each CLIN (i.e., different shirt size) |
| MaPI 1.4 | Offeror Part or Item Number for each CLIN (i.e., different shirt size) |
| MaPI 1.5 | Measuring guide and sizing instructions for shirts |
| Security Forces Combat Shirt (SFCS) | |
| SFCS 1.1 | All fabric shall be lightweight, breathable, moisture wicking and odor resistant |
| SFCS 1.2 | Long sleeve “over the head” style with a semi-tight fit that eliminates bunching or riding up under armor |
| SFCS 1.3 | Right & left sleeves: Operational Camouflage Pattern (OCP) |
| SFCS 1.4 | Right & left sleeves: Hook and loop cuff closures |
| SFCS 1.5 | Right & left sleeves: OCP patterned abrasion resistant elbow patches on outside of shirt sleeves |
| SFCS 1.6 | Right & left sleeves: Two-channel flapped pen pocket on both forearms secured by hook & loop fastener tape |
| SFCS 1.7 | Right & left sleeves: Non-metal zippered shoulder pockets with 6-1/4 inch opening for all sizes. Opening toward front of arm |
| SFCS 1.8 | Right shoulder pocket must accommodate hook & loop name tape, rank insignia and flag |
| SFCS 1.9 | Loop fastener for name tape shall be 1 inch wide x 5-1/2 inches long |
| SFCS 1.10 | Loop fastener for the rank patch shall be 2 inches wide x 2 inches long |
| SFCS 1.11 | Loop fastener for the flag shall be 2 inches wide x 3-1/2 inches long |
| SFCS 1.12 | Left shoulder pocket must accommodate hook & loop unit patch |
| SFCS 1.13 | Loop fastener for the unit patch shall be 6-1/4 inches wide x 4 inches long |
| SFCS 1.14 | Combat shirt side panels from underarm/sleeve down shall be OCP |
| SFCS 1.15 | Front and back torso panels & mock turtle neck shall be Tan 499 |
| SFCS 1.16 | Modesty panel covering chest area may be single or double layered |
| SFCS 1.17 | Available in the following men's sizes: |
| SFCS 1.17.1 | o X-Small: <34" chest |
| SFCS 1.17.2 | o Small: 34" - 38" chest |
| SFCS 1.17.3 | o Medium: 38" - 42" chest |
| SFCS 1.17.4 | o Large: 42" - 46" chest |
| SFCS 1.17.5 | o X-Large: 46" - 50" chest |
| SFCS 1.17.6 | o XX-Large: 50" - 54" chest |
| SFCS 1.17.7 | o XXX-Large: 54" - 58" chest |
| SFCS 1.18 | Available in the following women's sizes: |
| SFCS 1.18.1 | o X-Small: 32" - 33"chest |
| SFCS 1.18.2 | o Small: 34" - 35" chest |
| SFCS 1.18.3 | o Medium: 36" - 37" chest |
| SFCS 1.18.4 | o Large: 38" - 41" chest |
| SFCS 1.18.5 | o X-Large: 42" - 44" chest |
| SFCS 1.18.6 | o XX-Large: 45" - 48" chest |
| SFCS 1.18.7 | o XXX-Large: 49" - 52" chest |
| SFCS 1.19 | Descriptive information added to the Combat Shirt’s label, tag and packaging shall clearly indicate this shirt does not provide fire resistance or flame retardant protection |
File details come from the government source that posted it. Updated .