Attachment_3_-_Wage_Determination.pdf
PDF 58 KB Posted
- Attached to
- GAOA SOAP GULCH ROAD Federal contract opportunity
- Solicitation number
- 140L3626Q0021
About this file
This document is a General Decision wage determination issued by the U.S. Department of Labor for highway construction projects in Montana. General Decision Number MT20260080, effective January 30, 2026, applies statewide across all Montana counties for highway construction work.
The wage determination establishes prevailing wage rates and fringe benefits for various construction trades and labor classifications. Wage rates range from $27.71 per hour for Laborers Group 1 (flag persons for traffic control) to $92.66 per hour for divers performing diving work. Key classifications include Carpenters at $36.49/hour, Cement Masons at $33.41/hour, Electricians at $39.08/hour, Ironworkers at $30.43–$34.83/hour, Painters at $36.00/hour, and Power Equipment Operators ranging from $32.47–$41.95/hour depending on equipment type. Fringe benefits vary by classification, ranging from $12.36–$25.37 per hour. Special provisions apply to divers, including depth pay premiums for surface diving (ranging from $2.00–$5.00 per foot depending on depth) and enclosure diving ($1.00 per foot for depths exceeding 25 feet). The determination also incorporates Executive Order 13706 requirements for paid sick leave (1 hour per 30 hours worked, up to 56 hours annually) and references Executive Order 13658 minimum wage standards. Unlisted classifications needed for work outside the listed scope may be added after contract award through labor standards contract clauses. The document includes wage determination appeals procedures and instructions for contacting the Department of Labor's Wage and Hour Division and Branch of Construction Wage Determinations.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Sol_140L3626Q0021_Amd_0004.pdf | ||
| New_Attachment_2_-_Drawings_0004.pdf | ||
| New_Attachment_1_-_Supplemental_Specs_0004.pdf | ||
| Sol_140L3626Q0021_Amd_0003.pdf | ||
| Sol_140L3626Q0021_Amd_0002.pdf | ||
| Sol_140L3626Q0021_Amd_0001.pdf | ||
| Attachment_1_-_Supplemental_Specs.pdf | ||
| Sol_140L3626Q0021.pdf | ||
| Attachment_2_-_Drawings.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
"General Decision Number: MT20260080 01/30/2026
State: Montana
Construction Type: Highway
Counties: Montana Statewide.
HIGHWAY CONSTRUCTION PROJECTS
Modification Number Publication Date 0 01/16/2026 1 01/30/2026
* SAMT2025-001 01/11/2025
Rates Fringes
CARPENTER
Carpenter...................$ 36.49 14.33 Millwright..................$ 40.45 21.25
CEMENT MASON/CONCRETE FINISHER...$ 33.41 16.51
DIVER
Diver Tender................$ 45.30 18.38 Diving......................$ 92.66 18.38 Standy-By...................$ 46.33 18.38 The Tender shall receive 2 hours at the straight time pay rate per shift for dressing and/or undressing when work is done under hyperbaric conditions.
Depth Pay (Surface Diving):
0-20 ft.: Free zone >20-100 ft.: $2.00 per ft.
>100-150 ft.: $3.00 per ft.
>150-220 ft.: $4.00 per ft.
>220 ft.: $5.00 per ft.
Diving in Enclosures (Diver Only):
0-25 ft.: Free zone >25-300 ft.: $1.00 per ft.
ELECTRICIAN......................$ 39.08 20.00
IRONWORKER
Reinforcing Iron and Rebar Workers.....................$ 34.83 25.37 Structural Iron and Steel Workers.....................$ 30.43 25.22
LABORER
Group 1.....................$ 27.71 12.80 Group 2.....................$ 30.87 12.36 Group 3.....................$ 31.10 12.36 Group 4.....................$ 32.12 12.36 GROUP 1: Flag Person for Traffic Control
GROUP 2: General Labor; Asbestos Removal; Burning Bar; Bucket Man; Carpenter Tender; Caisson Worker; Cement Mason Tender;
Cement Handler (dry); Chuck Tender; Choker Setter; Concrete Worker; Curb Machine-Lay Down; Crusher and Batch Worker;
Heater Tender; Fence Erector; Landscape Laborer; Landscaper;
Lawn Sprinkler Installer; Pipe Wrapper; Pot Tender; Powderman
4/22/26, 2:56 PM SAM.gov https://sam.gov/wage-determination/MT20260080/1 1/6
Tender; Rail and Truck Loaders and Unloaders; Riprapper; Sign Erection; Guardrail and Jersey Rail; Spike Driver; Stake Jumper; Signalman: Tail Hoseman; Tool Checker and Houseman and Traffic Control Worker
GROUP 3: Concrete Vibrator; Dumpman (Grademan); Equipment Handler; Geotextile and Liners; High-Pressure Nozzleman;
Jackhammer (Pavement Breaker) Non-Riding Rollers; Pipelayer;
Posthole Digger (power); Power Driven Wheelbarrow; Rigger;
Sandblaster; Sod-Cutter-power and Tampers
GROUP 4: Hod Carrier; Water Well Laborer; Blaster; Wagon Driller; Asphalt Raker; Cutting Torch; Grade Setter; High- Scaler; Power Saws (Faller & Concrete); Powderman; Rock & Core Drill; Track or Truck Mounted Wagon Drill and Welder incl. Air Arc
LINE CONSTRUCTION
Equipment Operator..........$ 38.38 18.60 Groundman...................$ 29.96 17.64 Lineman.....................$ 50.11 19.88
PAINTER..........................$ 36.00 12.84
PILE BUCKS.......................$ 36.49 14.33
POWER EQUIPMENT OPERATOR:
Group 1.....................$ 32.47 12.77 Group 2.....................$ 34.55 12.77 Group 3.....................$ 35.70 12.77 Group 4.....................$ 36.91 12.77 Group 5.....................$ 38.05 12.77 Group 6.....................$ 39.27 12.77 Group 7.....................$ 41.95 12.77 GROUP 1: Air Compressor; Auto Fine Graders; Belt Finishing;
Boring Machine (small); Cement Silo; Crane, A-Frame Truck Crane; Crusher Conveyor; DW-10, 15, and 20 Tractor Roller;
Farm Tractor; Forklift; Form Grader; Front End Loader Under 1 CU Yard; Heavy Duty Drills; Herman Nelson Heater; Mulching Machine; Oiler, All Except Cranes & Shovels; Pumpman
GROUP 2: Air Doctor; Backhoe/Excavator/Shovel up to and including 3 CU Yard; Bit Grinder; Bituminous Paving Travel Plant; Boring Machine Large; Broom, Self-Propelled; Concrete Travel Batcher; Concrete Float & Spreader; Concrete Bucket Dispatcher; Concrete Finish Machine; Concrete Conveyor;
Distributor; Dozer; Rubber-Tired, Push & Side Boom; Elevating Grader/Gradall; Field Equipment Serviceman; Front End Loader 1 CU Yard to including 5 CU Yard; Grade Setter; Heavy Duty Drills, All Types; Hoist/Tugger, All; Hydralift Forklifts & Similar; Industrial Locomotive; Motor Patrol (except finish);
Mountain Skidder; Oiler, Cranes\Shovels; Pavement Breaker, EMSCO; Power Saw, Self-Propelled; Pugmill; Pumpcrete\Grout Machine; Punch Truck; Roller, Other Than Asphalt; Roller, Sheepsfoot (Self-Propelled); Roller, 25 Tons and Over; Ross Carrier; Rotomill Under 6 Ft; Trenching Machine;
Washing/Screening Plant
GROUP 3: Asphalt Paving Machine; Asphalt Screed;
Backhoe/Excavator/Shovel Over 3 CU Yard; Cableway Highline;
Concrete Batch Plant; Concrete Curing Machine; Concrete Pump;
Cranes; Creter; Cranes, Electric Overhead; Cranes 24 Tons and Under; Curb Machine/Slip Form Paver; Finish Dozer; Front End Loader Over 5 CU Yard; Mechanic/Welder; Pioneer Dozer; Roller Asphalt (Breakdown & Finish); Rotomill, Over 6 FT; Scraper, https://sam.gov/wage-determination/MT20260080/1 2/6
Single, Twin or Pulling Belly Dump; Yo-Yo Cat Haul Truck, Articulating Trucks, Vac Truck
GROUP 4: Asphalt/Hot Plant Operator, Cranes, 25 Tons up to and incl. 44 Tons; Crusher Operator; Finish Motor Patrol; Finish Scraper
GROUP 5: Cranes, 45 Tons up to and incl. 74 Tons
GROUP 6: Cranes, 75 Tons up to and incl. 149 Tons; Crane, Whirley (All)
GROUP 7: Cranes, 150 Tons up to and incl. 250 Tons; Cranes, over 250 tons-add $1.00 for every 100 tons over 250 tons;
Crane, Tower (All); Crane Stiff-Leg or Derrick; Helicopter Hoist
TRUCK DRIVER
Group 1.....................$ 28.21 12.57 Group 2.....................$ 35.74 12.57 Group 1: Pilot Car
Group 2: Combination Truck and Concrete Mixer and Transit Mixer; Dry Batch Trucks; Distributor Driver; Dumpman; Dump Trucks and Similar Equipment; Dumpster; Flat Trucks; Lumber Carriers; Lowboys; Pickup; Powder Truck Driver; Power Boom;
Serviceman; Service Truck/Fuel Truck/Tireperson; Truck Mechanic; Trucks With Power Equipment; Warehouseman, Partsman, Cardex and Warehouse Expeditor; Water Trucks
WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.
Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.
Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.
Note: Executive Order 13658 generally applies to contracts subject to the Davis-Bacon Act that were awarded on or between January 1, 2015 and January 29, 2022, and that have not been renewed or extended on or after January 30, 2022. Executive Order 13658 does not apply to contracts subject only to the Davis-Bacon Related Acts regardless of when they were awarded.
If a contract is subject to Executive Order 13658, the contractor must pay all covered workers at least $13.30 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing https://sam.gov/wage-determination/MT20260080/1 3/6 on the contract in 2025. The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under Executive Order 13658 is available at www.dol.gov/whd/govcontracts.
Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (iii)).
The body of each wage determination lists the classifications and wage rates that have been found to be prevailing for the type(s) of construction and geographic area covered by the wage determination. The classifications are listed in alphabetical order under rate identifiers indicating whether the particular rate is a union rate (current union negotiated rate), a survey rate, a weighted union average rate, a state adopted rate, or a supplemental classification rate.
Union Rate Identifiers
A four-letter identifier beginning with characters other than ""SU"", ""UAVG"", ?SA?, or ?SC? denotes that a union rate was prevailing for that classification in the survey. Example:
PLUM0198-005 07/01/2024. PLUM is an identifier of the union whose collectively bargained rate prevailed in the survey for this classification, which in this example would be Plumbers.
0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2024 in the example, is the effective date of the most current negotiated rate.
Union prevailing wage rates are updated to reflect all changes over time that are reported to WHD in the rates in the collective bargaining agreement (CBA) governing the classification.
Union Average Rate Identifiers
The UAVG identifier indicates that no single rate prevailed for those classifications, but that 100% of the data reported for the classifications reflected union rates. EXAMPLE:
UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a weighted union average rate. OH indicates the State of Ohio.
The next number, 0010 in the example, is an internal number used in producing the wage determination. The date, 01/01/2024 in the example, indicates the date the wage determination was updated to reflect the most current union average rate.
A UAVG rate will be updated once a year, usually in January, to reflect a weighted average of the current rates in the collective bargaining agreements on which the rate is based.
Survey Rate Identifiers
The ""SU"" identifier indicates that either a single non-union rate prevailed (as defined in 29 CFR 1.2) for this classification in the survey or that the rate was derived by computing a weighted average rate based on all the rates https://sam.gov/wage-determination/MT20260080/1 4/6 reported in the survey for that classification. As a weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SUFL2022-007 6/27/2024. SU indicates the rate is a single non-union prevailing rate or a weighted average of survey data for that classification. FL indicates the State of Florida. 2022 is the year of the survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. The date, 6/27/2024 in the example, indicates the survey completion date for the classifications and rates under that identifier.
?SU? wage rates typically remain in effect until a new survey is conducted. However, the Wage and Hour Division (WHD) has the discretion to update such rates under 29 CFR 1.6(c)(1).
State Adopted Rate Identifiers
The ""SA"" identifier indicates that the classifications and prevailing wage rates set by a state (or local) government were adopted under 29 C.F.R 1.3(g)-(h). Example: SAME2023-007 01/03/2024. SA reflects that the rates are state adopted. ME refers to the State of Maine. 2023 is the year during which the state completed the survey on which the listed classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination.
The date, 01/03/2024 in the example, reflects the date on which the classifications and rates under the ?SA? identifier took effect under state law in the state from which the rates were adopted.
WAGE DETERMINATION APPEALS PROCESS
1) Has there been an initial decision in the matter? This can be:
a) a survey underlying a wage determination
b) an existing published wage determination
c) an initial WHD letter setting forth a position on a wage determination matter
d) an initial conformance (additional classification and rate) determination
On survey related matters, initial contact, including requests for summaries of surveys, should be directed to the WHD Branch of Wage Surveys. Requests can be submitted via email to davisbaconinfo@dol.gov or by mail to:
Branch of Wage Surveys Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
Regarding any other wage determination matter such as conformance decisions, requests for initial decisions should be directed to the WHD Branch of Construction Wage Determinations.
Requests can be submitted via email to BCWD-Office@dol.gov or by mail to:
Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor https://sam.gov/wage-determination/MT20260080/1 5/6
200 Constitution Avenue, N.W.
Washington, DC 20210
2) If an initial decision has been issued, then any interested party (those affected by the action) that disagrees with the decision can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).
Requests for review and reconsideration can be submitted via email to dba.reconsideration@dol.gov or by mail to:
Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210
The request should be accompanied by a full statement of the interested party's position and any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.
3) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:
Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.
Washington, DC 20210.
END OF GENERAL DECISION"
https://sam.gov/wage-determination/MT20260080/1 6/6
File details come from the government source that posted it. Updated .