Attachment 3.pdf

NTSB Seal Guidelines

Color Seal

Seal #1

Monochrome seal The NTSB has two versions of the monochrome seal.

Seal #2

When the seal is shown on a dark background, use the ‘white’ version, where the head and tail of the eagle and scroll are filled so as to appear ‘white’ (screenshot below). Use this art for yellow on navy blue.

ATTACHMENT 3

Seal #3

When the seal is shown on a light background, use the version where the head and tail is same color as the light background (screenshot below). Use this art for blue on gray or safety yellow.

BRAND IDENTITY

X = ½ of height X

X

Logo Guidelines

Area of Isolation To ensure that the logo is clearly visible, there should always be a surrounding clear zone. The minimum clear space (marked as X) is based on half of the cap height measured from the edge of the logo. Text or graphic elements should never appear branding without interference.

Logo Sizes There is a minimum size for reproduction of the logo to ensure that it maintains legibility. The smallest size for the logo when used independently is 5⁄8” wide.

Minimum sizes for applications such as embroidery or engraving vary for each type, so careful testing is recommended when creating these items.

To maintain the integrity of the System of Logos and Lockups:

• DO give the logo prominence on a page.

DO ensure logos meet proper size requirements

DO maintain the required clear space around the

DO scale the logo proportionately.

logo.

DO NOT use the logo more than once on a single page or screen.

DO NOT use the logo as part of a sentence within text.

DO NOT stretch, condense or distort when scaling.

The minimum size reduction for the Logo when used independently is 5⁄8” (0.625 in / 60 pixels) wide.

These minimum sizes apply to all logos, both for print and digital use.

NAVY BLUE

PMS 296C

CMYK 100/46/0/70

RGB 0/45/86

HEX# 002D56

CAUTION YELLOW

PMS 109C

CMYK 0/10/100/0

RGB 255/221/0

HEX# FFDD00

Navy Blue for print on light colors

Caution Yellow for print on dark colors