Attachment 2a- Maintenance Task List Bry Air Dehumidifier.pdf
PDF 14 KB Posted
- Solicitation number
- SP330026Q0160
- Issued by
-
Defense Logistics Agency Distribution
About this file
This file is a Maintenance Task List attachment that specifies required maintenance procedures for two Dry-Air HVAC units used in a federal contract.
The document outlines 19 maintenance tasks for the Dry-Air Model No. VFB-ECO-24G-2250 and 19 tasks for the Dry-Air Model No. VFB-ECO-50G-4500. Both maintenance schedules are nearly identical and include: air filter changes; drive belt maintenance; bearing greasing; blower assembly cleaning; pressure testing; coil and drain line cleaning; heat compartment servicing; motor oil and amperage testing; refrigerant charge verification; temperature and Delta-T recording; reversing valve verification; defrost component inspection; electrical connection tightening; valve cap replacement; Yellow Card documentation; unit mode and serial number recording; protective coating application to outdoor units; pad area cleaning; and disconnect activation. The tasks appear designed to ensure operational efficiency, safety, and proper functioning of heating and cooling system components. The two units differ only in model designation and capacity ratings (24G-2250 versus 50G-4500), suggesting the maintenance procedures are standardized across the product line with minor scaling differences.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 2
MAINTENANCE TASK LIST
Dry-Air Model No. VFB-ECO-24G-2250
1. Change air filters
2. Change & tighten all drive belts
3. Grease all motor bearings and drive bearings
4. Remove safety guard and clean blower assembly
5. Test head and suction pressure
6. Clean indoor coil, outdoor coil, drain line & pan
7. Clean in place heat compartment & components
8. Oil & test amps on all motors
9. Check refrigerant charge by sub-cooling or superheat
10. Record ambient temperature and Delta-T across coils
11. Verify reversing valve is functioning properly
12. Check and verify all defrost components
13. Tighten all electrical connections
14. Replace/tighten valve caps
15. Put “Yellow Card” in unit
16. Record outdoor unit mode & serial numbers
17. Wash & apply protective coating to outside unit
18. Clean area around pad
19. Turn on disconnect
Dry-Air Model No. VFB-ECO-50G-4500
1. Change air filters
2. Change & tighten all drive belts
3. Grease all motor bearings and drive bearings
4. Remove safety guard and clean blower assembly
5. Test head and suction pressure
6. Clean indoor coil, outdoor coil, drain line & pan
7. Clean in place heat compartment & components
8. Oil & test amps on all motors
9. Check refrigerant charge by sub-cooling or superheat
10. Record ambient temperature and Delta-T across coils
11. Verify reversing valve is functioning properly
12. Check and verify all defrost components
13. Tighten all electrical connections
14. Replace/tighten valve caps
15. Put “Yellow Card” in unit
16. Record outdoor unit mode & serial numbers
17. Wash & apply protective coating to outside unit
18. Clean area around pad
19. Turn on disconnect
File details come from the government source that posted it. Updated .