Colonial Pipeline Company

CPC Product Specifications March 2016

PRODUCT SPECIFICATIONS

3.3.1 CONVENTIONAL REGULAR GASOLINE BLENDSTOCK (CBOB)

FOR BLENDING WITH 10% DENATURED FUEL ETHANOL

Cancels Previous Issues of A grades (92% PURITY) AS DEFINED IN ASTM D4806

This CBOB may not be combined with any other CBOB except CBOB having the same requirement for oxygenate type and amount.

All parameters must be met after blending with denatured fuel ethanol unless noted.

ALL A GRADE REQUIREMENTS (SEGREGATED AND FUNGIBLE)

ASTM Test

Product Property Method Minimum Maximum Note Octane RON D2699 Report

MON D2700 82.0

(R+M)/2 87.0

Oxygen Content, weight % [C]D4815, D5599 0.1 1,2,7 RVP (psi) D5191 3

Grades A1,1A 8.8 A2,2A 10.0 A3,3A 12.5 A4,4A 14.5 A5,5A 15.5

Heavy Metals are not allowed to be present.

Additive requirements/restrictions - refer to section 3.2.

This is a base gasoline, not for sale to the ultimate consumer.

Any gasoline exhibiting an offensive odor and/or poses a personal health hazard will not be accepted for shipment.

Any gasoline containing more than 0.50 wt. % of dicyclopentadiene will not be accepted for shipment.

The referee method will be based on a gas chromatograph test.

Gasoline designed for gasoline-ethanol blends in accordance with 40 CFR 80.27(d)(2) Suitable for the special RVP provisions for ethanol blends that contain 9 and 10 vol % ethanol.

Delivery test results may vary by the smaller of ASTM reproducibility for a given test or any test tolerance as allowed by state or EPA regulations at the point of delivery.

The use of this gasoline to manufacture a gasoline-ethanol blend containing anything other than between 9 and 10 volume percent ethanol may cause a summertime RVP violation.

Test Results

A1,1A, the RVP of this blendstock/gasoline for oxygenate blending does not exceed 7.8 psi A2,2A, the RVP of this blendstock/gasoline for oxygenate blending does not exceed 9.0 psi

PRODUCT SPECIFICATIONS

3.3.2 CONVENTIONAL REGULAR GASOLINE BLENDSTOCK (CBOB)

FOR BLENDING WITH 10% DENATURED FUEL ETHANOL

Cancels Previous Issues of A grades (92% PURITY) AS DEFINED IN ASTM D4806

FUNGIBLE ONLY REQUIREMENTS:

ASTM Test Product Property Method Minimum Maximum Note Benzene (vol%) D3606 3.8 Color Undyed Corrosion (Cu) 3 hrs @122oF (50oC) D130 1 Corrosion (Ag) 3 hrs @122oF (50oC) [C]D7667 D7671 1 Doctor test D4952 Negative (sweet) 5 or Mercaptan sulfur, wt.% D3227 0.002

Solvent Washed Gum mg/100 ml D381 4 Gravity oAPI at 60oF [C]D287 D1298, Report 7

D4052 Oxidation stability-minutes D525 240 7 Phosphorous, gms/gal D3231 0.004 Sulfur (ppmwt) D2622 80 8 or equivalent Nace Corrosion TM0172 B+ (Origin) 7 Volatility:

Driveability Index D4814 See Chart Distillation, oC (oF) @ %Evap. D86 Vapor/Liquid Ratio (V/L), oC (oF) @ 20 6

D5188 (See Note 6) Driveability 10 vol% 50 vol% 90 vol% End Pt. V/L

Grades Index Max Min Max Max Max Min A1,A2 1250 70(158) 66(150) 121(250) 190(374) 221(430) 50 (122) A3 1230 60(140) 66(150) 116(240) 185(365) 221(430) 47(116) A4 1220 55(131) 66(150) 113(235) 185(365) 221(430) 42(107) A5 1200 50(122) 66(150) 110(230) 185(365) 221(430) 39(102)

1. All A grades may not contain oxygenates, such as ethers and alcohols. The use of non-hydrocarbon blending components in these grades is prohibited.

3. For products blended to meet EPA or state imposed summer VOC requirements, tests must be performed in accordance with the procedures described in 40 CFR, Part 80.

[C] 4. Reserved [W] 5. 4. Mercaptan Sulfur waived if fuel is negative by Doctor test.

[W] 6. 5. Computer and Linear methods may be used to determine V/L value. [C] D5188 will be the referee method [W] 7. 6. Specifications must be met before blending of denatured fuel ethanol.

2. Refer to test methods published in 40 CFR Chapter 1, Part 80.46. Alternative aromatics and oxygenates test methods, ASTM D1319 and ASTM D 4815, may be used according to federal and state regulations.

[W] 8. 7. Refer to 40 CFR Part 80.195 (d)(2). Alternative sulfur test methods, ASTM D 5453 and D 7039, may be used according to federal and state regulations.

Test Results

[N] 8. Colonial will accept test methods results that are listed in ASTM D4814 for all tests. Test methods listed in the table above are considered referee methods by Colonial Pipeline. Referee methods apply for any dispute.

[N] 9. Use of these grades is controlled by the RVP calendar.

PRODUCT SPECIFICATIONS

3.5.1 REFORMULATED REGULAR GASOLINE BLENDSTOCK (RBOB)

FOR BLENDING WITH 10% DENATURED FUEL ETHANOL

Cancels Previous Issues of F grades (92% PURITY) AS DEFINED IN ASTM D4806

This RBOB may not be combined with any other RBOB except RBOB having the same requirement for oxygenate type and amount.

All parameters must be met after blending with denatured fuel ethanol unless noted.

ALL F GRADE REQUIREMENTS (SEGREGATED AND FUNGIBLE)

ASTM Test

Product Property Method Minimum Maximum Note Octane RON D2699 Report

MON D2700 82.0

(R+M)/2 87.0

Benzene (vol%) D3606 1.30 Oxygen Content, weight % D5599 (See Note) 1,2,7,8 Aromatics (vol%) D5769 (See Note) 50 2 E200 (vol%) D86 30 70 E300 (vol%) D86 70 100 Olefins (vol%) D1319 [C],D6550 25 Sulfur (ppmwt) D2622 80 9 Non-VOC Controlled Requirements RVP (psi) D5191 3

Grades F3,3F (Non-VOC Controlled) 11.5 F4,4F (Non-VOC Controlled) 13.5 F5,5F (Non-VOC Controlled) 15.0

VOC Controlled Requirements (Grades F1,F2,1F,2F, only) 2

RVP (psi) D5191 Report 3 Emissions Performance Reductions (%) 4

Region 1 (Grades F1,1F) Origin: -28.0% 11

Delivery: -25.0%

Region 2 (Grades F2,2F) Origin: -26.4% 11 -25.4%

Delivery: -23.4%

Test Results

PRODUCT SPECIFICATIONS

3.5.2 REFORMULATED REGULAR GASOLINE BLENDSTOCK (RBOB)

FOR BLENDING WITH 10% DENATURED FUEL ETHANOL

Cancels Previous Issues of F grades (92% PURITY) AS DEFINED IN ASTM D4806

FUNGIBLE ONLY REQUIREMENTS:

ASTM Test Product Property Method Minimum Maximum Note Color Undyed Corrosion (Cu) 3 hrs @122oF (50oC) D130 1 Corrosion (Ag) 3 hrs @122oF (50oC) [C] D7667,D7671 1 Doctor test D4952 Negative (sweet) 5 or Mercaptan sulfur, wt.% D3227 0.002

Solvent Washed Gum mg/100 ml D381 4 Gravity oAPI at 60oF [C] D287 ,D1298, Report 7

D4052 Oxidation stability-minutes D525 240 7 Phosphorous, gms/gal D3231 0.004 Nace Corrosion TM0172 B+ (Origin) 7 Volatility:

Driveability Index D4814 See Chart Distillation, oC (oF) @ %Evap. D86 Vapor/Liquid Ratio (V/L), oC (oF) @ 20 6

D5188 (See Note 6) Driveability 10 vol% 50 vol% 90 vol% End Pt. V/L

Grades Index Max Min Max Max Max Min F1,F2 1250 70(158) 66(150) 121(250) 190(374) 221(430) 50(122) F3 1230 60(140) 66(150) 116(240) 185(365) 221(430) 47(116) F4 1220 55(131) 66(150) 113(235) 185(365) 221(430) 42(107) F5 1200 50(122) 66(150) 110(230) 185(365) 221(430) 39(102)

NOTES (Apply to Fungible and Segregated):

Heavy Metals are not allowed to be present.

Additive requirements/restrictions - refer to section 3.2.

This is a base gasoline, not for sale to the ultimate consumer.

Any gasoline exhibiting an offensive odor and/or poses a personal health hazard will not be accepted for shipment.

Any gasoline containing more than 0.50 wt. % of dicyclopentadiene will not be accepted for shipment.

The referee method will be based on a gas chromatograph test.

1. All F grades may not contain oxygenates, such as ethers and alcohols. The use of non-hydrocarbon blending components in these grades is prohibited.

3. For products blended to meet EPA or state imposed summer VOC requirements, tests must be performed in accordance with the procedures described in 40 CFR, Part 80.

2. Refer to test methods published in 40 CFR Chapter 1, Part 80.46. Alternative aromatics and oxygenates test methods, ASTM D1319 and ASTM D 4815, may be used according to federal and state regulations.

Delivery test results may vary by the smaller of ASTM reproducibility for a given test or any test tolerance as allowed by state or EPA regulations at the point of delivery.

Test Results

PRODUCT SPECIFICATIONS

3.5.3 REFORMULATED REGULAR GASOLINE BLENDSTOCK (RBOB)

FOR BLENDING WITH 10% DENATURED FUEL ETHANOL

(92% PURITY) AS DEFINED IN ASTM D4806

Cancels Previous Issues of F grades

NOTES [N]CONTINUED (Apply to Fungible and Segregated):

4. Emissions reductions must be calculated using EPA guidelines.

5. Mercaptan Sulfur waived if fuel is negative by Doctor test.

6. Computer and Linear methods may be used to determine V/L value. [C] D5188 will be the referee method

7. Specifications must be met before blending of denatured fuel ethanol.

10. Woodbury and Linden facilities will only allow shipments of region 2 fuels.

Any Region 1 fuels shipped downstream of Aberdeen will be comingled with region 2 fuels

11. Refer to Colonial's current RVP schedule for cycle numbers

[N] 13. Use of these grades is controlled by the RVP calendar.

8. Oxygen content must meet a minimum of 1.7 wt.% and a maximum of 4.0 wt.% after blending of denatured fuel ethanol.

9. Refer to 40 CFR Part 80.195 (d)(2). Alternative sulfur test methods, ASTM D 5453 and D 7039, may be used according to federal and state regulations.

[N] 12. Colonial will accept test methods results that are listed in ASTM D4814 for all tests. Test methods listed in the table above are considered referee methods by Colonial Pipeline. Referee methods apply for any dispute.