Attachment 1 - SOW w Pictures.pdf

PDF 3 MB Posted

Attached to
Clean Diesel Fuel Tank
Solicitation number
FA480125Q0013
Issued by

About this file

This Statement of Work (SOW) details the cleaning of a 10,000-gallon diesel fuel tank and associated piping located at Building 933 on Holloman Air Force Base. The contractor is required to remove 25 bolts from the tank's access hatch, pressure wash the interior of the tank and 300 feet of 4-inch diameter piping using an appropriate diesel fuel cleaner, and properly remove and dispose of all wastewater. The tank is situated approximately 180 feet from the pavement, accessible by vehicle over gravel terrain.

Upon completion of the cleaning, the contractor must notify the Civil Engineering (CE) Inspector, who will inspect the tank. The project will be considered complete only after the tank interior is verified as clean and all waste products have been removed. Supplementary documentation includes a site plan drawing with the tank location circled in red and multiple photographs of the tank and piping infrastructure. The solicitation is part of the Department of the Air Force Air Combat Command's procurement process, with a site visit scheduled for 30 April 2025 at 1000 and questions due by 1 May 2025 at 1400.

View the file

Other files

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

STATEMENT OF WORK

CLEAN FUEL TANK & PIPING, BLDG 933

April 8, 2025

1. The Contractor shall clean a 10-000 gallon diesel fuel tank and associated piping at Bldg 933.

2. A Site Plan drawing is attached. The location of the tank is circled in red. Several pictures of the tank and piping are also attached.

3. There is an access hatch on top of the tank. The hatch cover is attached with 25 bolts that must be removed.

4. The tank is located about 180' from pavement. There is gravel between the tank and the pavement. A vehicle can drive over the gravel to the tank.

5. Pressure wash the inside of the tank and 300' of piping. Use an appropriate diesel fuel cleaner. The piping is about 4" in diameter. All waste water shall then be removed and properly disposed of.

6. Once all work is complete, notify the CE Inspector that the work is complete. The CE

Inspector will then inspect the tank. The project will be considered complete when the inside of the tank is clean and all waste products have been removed.

-----END-----

Imagery ©2025 Airbus, Maxar Technologies, Map data ©2025 50 ft

1231323259C Oval

SOW - Bldg 933 Fuel Tank correct
Site Plan 1
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5

File details come from the government source that posted it. Updated .