Attachment 1.docx

REQ DOC NO. - RCP 22RX19752 ATTACHMENT ____1_____

CONTINUATION SHEET CONTRACT NO. - _______________ PAGE _1__ OF _6__

NAME OF OFFER OR/CONTRACTOR

______________________________________________________________________________ITEM # SUPPLIES/SERVICES QTY U/I

C. DESCRIPTION/SPECIFICATIONS

C.1 THIS IS LEVEL I MATERIAL

C.2 CAP SCREW, HEX HEAD: NICKEL COPPER ALUMINUM (K-MONEL), 0.875”-09UNC-2A X 5.500”.

C.3 MANUFACTURE CAP SCREWS PER 688-1864 REV K WITH APPENDIX 1&5, AND MIL-DTL-1222J IC 1 INCORPORATED AS APPLICABLE.

(A) DESIGN, MATERIAL AND QUALITY ASSURANCE REQUIREMENTS FOR THREADED FASTENERS: 688-1864 WITH APPENDIX 1&5 MODIFIED TO INCLUDE APPLICABLE PORTIONS OF STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR: MIL-DTL-1222.

(B) TYPE I (1), HEX HEAD CAP SCREW (FINISHED HEX BOLT), STYLE: NOT APPLICABLE. NICKEL COPPER ALUMINUM PER CHEMICAL AND MECHANICAL PROPERTIES OF MATERIAL NO. 5 (QQ-N-286G, ANNEALED AND AGE HARDENED) OF TABLE I OF 688-1864K. THE SLOW STRAIN RATE TENSILE TEST REQUIRED ON THE STARTING MATERIAL BY QQ-N-286G SHALL BE PERFORMED BY ONE OF THE LABS LISTED IN C.3(B)(1).

(1) LIST OF AUTHORIZED LABORATORIES FOR SLOW STRAIN RATE TENSILE TEST:

1. Huntington Alloys, a Special Metals Company Attn: Frank Veltry 3200 Riverside Drive Huntington, WV 25705 Phone: (304) 526-5759

FAX: (304) 526-5973

2. Metallurgical Consultants, Inc.

Attn: W. M. Buehler 4820 Caroline PO Box 88046 Huston, TX 77288-0046 Phone: (713) 526-6351

FAX: (713) 526-2964

3. Naval Surface Warfare Center, Carderock Division Attn: Charles Roe Code 614 9500 Macarthur Blvd West Bethesda, MD 20817-5700 Phone: (301) 227-5031

FAX: (301) 227-5576

4. Teledyne Allvac Attn: Dr. W. D. Cao 2020 Ashcraft Ave.

Monroe, NC 28110 Phone: (704) 289-4511 Fax: (704) 289-4269

5. Mannesmann Röhrenwerke Mannesmann Forschungsinstitut (MFI) Attn: Dr. Weiss Postfach 251160 47251 Duisburg Germany Phone: 011-49-0203-9993194 Fax: 011-49-0203-9994415

6. Westmoreland Mechanical Testing & Research. Inc.

Old Route 30, Westmoreland Drive P.O. Box 388 Youngstown, PA 15696-0388 Phone: (724) 537-3131

FAX: (724) 537-3151

7. ThyssenKrupp VDM USA, Inc.

Larry Paul Technical Marketing Manager ThyssenKrupp VDM USA Inc.

122 E. Jefferson Tipton, IN 46072

(765) 675-9964 (office)

(765) 860-3769 (mobile) larry.paul@thyssenkrupp.com www.thyssenkruppvdm.com

(C) SIZE, LENGTH, THREAD SERIES AND CLASS OF FIT PER PARAGRAPH C.2 OF THIS PART. ASME B1.3M, SYSTEM 22S IS INVOKED.

(D) COATING NOT APPLICABLE

(E) SELF-LOCKING ELEMENT NOT APPLICABLE

(F) APPLICBLE SPECIFICATION REVISIONS TO BE USED ARE:

FOR SPECIFICATIONS NOT LISTED ABOVE, REVISIONS SHALL BE THOSE LISTED IN THE ACQUISITION STREAMLINING AND STANDARDIZATION INFORMATION SYSTEM (ASSIST) AT THE TIME OF CONTRACT AWARD. AS OF THE ISSUE DATE OF THIS, ASSIST INFORMATION IS AVAILABLE AT THE FOLLOWING WEBSITE: https://quicksearch.dla.mil

C.4 CLEANLINESS REQUIREMENTS: PARTS SHALL BE CLEANED BY ANY PROCESS OR COMBINATION OF PROCESSES WHICH WILL ACCOMPLISH THOROUGH CLEANING WITHOUT DAMAGE TO THE PARTS. SURFACES SHALL BE EXAMINED VISUALLY TO DETERMINE FREEDOM FROM DIRT, CORROSION, OIL, GREASE OR FOREIGN RESIDUE.

C.6 DATA REQUIREMENTS PER EXHIBIT A (DD-1423) & ATTCHMENT #1.

C.6.1 MATERIAL CERTIFICATIONS; EXHIBIT A SEQUENCE A001.

C.6.1.1 THE CONTRACTOR SHALL PROVIDE THE LISTED PROCEDURE(S)/CERTIFICATION REPORT(S) TO THE PROCURING ACTIVITY. THE CONTRACTOR SHALL SPECIFY THE FOLLOWING ON PROCEDURE(S)/REPORT(S) REQUIRING SUBMITTAL, AS APPLICABLE, IN ORDER THAT THE PROCEDURE/REPORT CAN BE READILY REVIEWED AGAINST THE APPROPRIATE ACCEPTANCE CRITERIA:

C.6.2.2 LIQUID PENETRANT TESTING IS REQUIRED BY PARAGRAPH 4.7.4 OF 688-1864K.

D. PRESERVATION/PACKAGING/PACKING

D.1 PRESERVATION, PACKAGING, AND PACKING SHALL BE IN ACCORDANCE WITH ASTM D3951-15, STANDARD PRACTICE FOR COMMERCIAL PACKAGING, EXCEPT THAT EACH EXTERNALLY THREADED FASTENER SHALL BE FURNISHED WITH A THREAD PROTECTOR AND EACH ITEM SHALL BE INDIVIDUALLY PACKAGED IN A COLORED (EXCEPT YELLOW) TRANSPARENT ZIP-LOCK TYPE PACKAGE WITH A MINIMUM SIZE OF 4” X 7”. MARKING AND LABELING SHALL BE IN ACCORDANCE WITH MIL-STD-129. BAR CODE MARKING FOR HAND SCANNING IS REQUIRED.

E. INSPECTION AND ACCEPTANCE

E.1 GOVERNMENT INSPECTION IS REQUIRED DURING MANUFACTURE AND PRIOR TO SHIPMENT FROM THIS FACILITY. UPON RECEIPT OF THIS ORDER, PROMPTLY NOTIFY THE REPRESENTATIVE OF THE GOVERNMENT OFFICE WHO NORMALLY SERVES YOUR FACILITY SO THAT APPROPRIATE PLANNING FOR GOVERNMENT INSPECTION CAN BE ACCOMPLISHED. IN THE EVENT A REPRESENTATIVE OF THE GOVERNMENT OFFICE CANNOT BE LOCATED, THE CONTRACT SPECIALIST SHOULD BE NOTIFIED PROMPTLY. PROVIDE THE LOCATION WHERE PROCUREMENT QUALITY ASSURANCE (PQA) OF THE SUPPLIES WILL BE MADE ALONG WITH THE ORGANIZATION THAT WILL BE PERFORMING PQA.

E.2 ALL NON-CONFORMANCES TO CONTRACT REQUIREMENTS AFFECTING PRODUCT AND/OR DOCUMENTATION SHALL REQUIRE PROCURING ACTIVITY WAIVER APPROVAL TO ACCEPT.

E.3 APPROVED SAMPLING PLANS (E.G. MIL-STD-105, ANSI/ASQC Z1.4) ARE ALLOWED AS DELINEATED IN THE APPLICABLE MANUFACTURING SPECIFICATION EXCEPT THAT A LOT IS ACCEPTABLE BASED ON ZERO DEFECTS. WHEN A REJECT IS FOUND, THE ENTIRE LOT SHALL BE INSPECTED FOR THAT ATTRIBUTE AND ANY DEFECTIVE ITEMS SHALL BE REMOVED FROM THE LOT IN ORDER FOR THE LOT TO BE ACCEPTABLE