attachment_1_bid_90_25.pdf
PDF 106 KB Posted
- Attached to
- Work Boat for Oil Spill Response
- Solicitation number
- Bid 90-25
- Issued by
- Rockingham County, New Hampshire
About this file
This is a technical specifications document from the New Hampshire Department of Environmental Services for an Oil Spill Response Work Boat (Specification #WB-3, dated 12/2/24). The document details requirements for a new aluminum-hulled spill response vessel to be used for spill cleanup, boom deployment, and field operations in New Hampshire estuarine waters up to 10 miles offshore. The vessel must be at least 30 feet in length with a 10-foot minimum beam, featuring a pilot house and rear work deck configuration suitable for tow operations in an oil spill environment. The boat will be berthed in salt water year-round at a facility in the Piscataqua River area.
The specifications outline detailed technical requirements including aluminum hull construction (5086 alloy ¼" hull, 5052 alloy 3/16" sides), a minimum 300 hp single engine inboard or inboard/outboard diesel, comprehensive electrical systems with dual marine AGM batteries, and various navigation and communication equipment including two Marine VHF radios, radar/GPS/depthfinder with a minimum 9" screen, and LED navigation lights meeting USCG specifications. The builder must have experience in constructing aluminum-hulled work vessels for oil spill environments and must provide cut sheets and/or photographs of the proposed boat with their bid for review.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Addendum_1_bid_90_25.pdf | ||
| Addendum_2_bid_90_25.pdf | ||
| bid_90_25.pdf | ||
| attachment_1_bid_90_25.pdf | ||
| bid_90_25.pdf | ||
| addendum-2-bid-90-25.pdf | ||
| bid-90-25.pdf | ||
| addendum-3-bid-90-25.pdf | ||
| addendum-1-bid-90-25.pdf | ||
| attachment-1-bid-90-25.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 1: SPECIFICATIONS
Specifications for Oil Spill Response Work Boat
New Hampshire Department of Environmental Services
Specification # WB-3 12/2/24
Wanted:
Spill response boat to be used for spill cleanup, boom deployment and field operations. This vessel will need to be of aluminum-hulled construction and have a pilot house and rear work deck configuration designed to work as a tow vessel in an oil spill environment. Its use will be mainly in New Hampshire estuarine waters and up to 10 miles offshore and remain berthed in salt water up to 365 days/year. The vessel will be berthed at a facility in the Piscataqua River area. Builder must have experience in building aluminum-hulled work vessels for use in oil spill environments. Builder must provide cut sheet and/or photographs depicting the proposed boat with bid for review and consideration. Boat will be of new construction.
Hull:
Length – 30’minimum.
Beam – 10’minimum
Aluminum hull construction –minimum 5086 alloy ¼” hull, 5052 alloy 3/16” sides
Non-skid flooring – Marine Grade Aluminum Alloy, 3/16” minimum
Semi displacement hull with full length keel
Optimal design to incorporate operational vessel draft of 3 feet or less – to be approved by DES.
Pilot house aluminum hardtop driving station with glass windshield, sliding windows on sides, full enclosure and door with lock.
Heating system for pilot house – engine cooling system heater loop controlled with electric fan
Electric windshield wipers.
Driving station pedestal seat with cushion
Fuel tank below deck – minimum 50 gallon capacity
Self-bailing deck draining to the stern
Tow post – 3” aluminum – mounted amidships forward of propeller
Push Knees on the bow of the vessel
Rub rail - to be installed on sides and bow of vessel – fabric covered foam or equivalent rubber
D ring bumper that covers the bow and both beams of the boat
Deck plates to access fuel tank (fittings and sender) and bilge (pumps and level switches)
Propulsion:
Minimum 300 hp Single engine inboard or inboard/outboard diesel– new motor and transmission
Bow thruster with driving station mounted control – thruster power to be approved by DES
Single binnacle control for combined shift and throttle operation
Hydraulic Steering
Attachment 1: SPECIFICATIONS
Specifications for Oil Spill Response Work Boat
New Hampshire Department of Environmental Services
Specification # WB-3 12/2/24
Electrical:
Full grounded electrical system, hull not part of galvanic feeding loop, zinc anode protection
Dual marine AGM batteries – Battery configuration and size to accommodate bow thruster operation in heavy current for docking activities (est. 1-2 minutes of intermittent operation for power bank)
Battery switch – all switches to be mounted inside pilot house
Battery charging system – 120v shore power connection acceptable
Waterproof breaker/switch panel on console driving station
LED navigation lights – USCG specifications
Deck Lights/Flood Lights installed to illuminate cockpit and work areas of boat
(2) Marine VHF Radios – ICOM M324 or equivalent – mounted on console driving station
8’ Marine VHF Antenna – Mounted to side/top of pilot house (not on gunwale)
Radar/GPS/Depthfinder –Minimum 9” screen - internal GPS antenna – Garmin GPSMap 942 xs and GMR 18 HD+ Radome or equivalent (Marine Charts) - with transom mount transducer
Bilge pumps with automatic float switches and manual switches
(2) 12v plugs - mounted on console driving station
(2) USB plugs - mounted on console driving station
Electric horn – Waterproof configuration – control switch mounted on console driving station
Trim tabs – trim tab control mounted on console driving station
File details come from the government source that posted it. Updated .