Attachment 04_Cross Referrence Matrix (3 Pages).xlsx
XLSX spreadsheet 29 KB Posted
- Attached to
- Wattmeter Calibration Systems
- Solicitation number
- N6426726R1003
About this file
This file is a Compliance Technical Evaluation Matrix for a Wattmeter Calibration Systems solicitation (N64267-26-R-1003) issued by the Department of the Navy Naval Sea Systems Command. The detailed matrix covers comprehensive technical requirements across multiple sections, including safety, design and construction, digital interfaces, electrical power sources, environmental requirements, performance specifications, and workload test point support.
The solicitation is for a single Indefinite Delivery/Indefinite Quantity (IDIQ) contract with strict compliance requirements for wattmeter calibration equipment. Key technical areas include precise RF power and frequency outputs, component specifications for low and high power transfer standards, transit case requirements, maintenance provisions, and compatibility testing for 38 specific wattmeter models from manufacturers like Bird Electronic, Electro Impulse Laboratory, and Lexan Industries. The procurement is an all-or-none requirement, with proposals to be submitted electronically, and contractors must be registered in the System for Award Management (SAM).
View the file
Other files
Show all 18
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CSS 01-3246 Compliance
| Technical Evaluation | |||||
| Solicitation: N64267-26-R-1003 | |||||
| Contractor: | TBD | ||||
| Paragraph | Title | Meets | Does Not Meet | Complaince Reference in Proposal | Comments |
| 3.0 | Requirements | ||||
| 3.1 | Safety | ||||
| 3.2 | Interchangeability | ||||
| 3.3 | Design and Construction | ||||
| 3.3.1 | Operator adjustments and controls | ||||
| 3.3.1.1 | Operator adjustments | ||||
| 3.3.1.2 | Operator Controls | ||||
| 3.3.2 | Connectors, electric | ||||
| 3.3.3 | Wiring, internal | ||||
| 3.3.1 | Internal Cooling | ||||
| 3.3.4.1 | Cooling devices | ||||
| 3.3.5 | Self-Test capability | ||||
| 3.4 | Digital Interface | ||||
| 3.4.1 | Digital Interface Requirements | ||||
| 3.5 | Electrical power sources and connections | ||||
| 3.5.1 | Electrical Power Source | ||||
| 3.5.1.1 | Nominal and alternate power source | ||||
| 3.5.1.1.1 | Interruption of power source | ||||
| 3.5.1.1.2 | Battery Restricitons | ||||
| 3.5.1.1.2.1 | Lithium Batteries | ||||
| 3.5.2 | Electrical Power connections | ||||
| 3.5.2.1 | Input power cable | ||||
| 3.5.2.2 | Input power switch | ||||
| 3.5.2.3 | Excessive current drain protection | ||||
| 3.5.2.4 | Indicators | ||||
| 3.6 | Enclosure physical characteristics | ||||
| 3.6.1 | Dimensions | ||||
| 3.6.2 | Weight | ||||
| 3.6.3 | Enclosure requirements | ||||
| 3.6.3.1 | Enclosures, console cabinet | ||||
| 3.6.3.2 | Work surfaces, console cabinet | ||||
| 3.7 | Marking and identification | ||||
| 3.7.1 | Marking | ||||
| 3.7.1.1 | Warning Markings | ||||
| 3.7.1.2 | Panel marking and processes | ||||
| 3.7.2 | Equipment identification | ||||
| 3.8 | Environmental Requirements | ||||
| 3.8.1 | Warm-up | ||||
| 3.8.2 | Temperature and Humidity | ||||
| 3.8.3 | Acoustic noise | ||||
| 3.9 | Performance Requirements | ||||
| 3.9.1 | Wattmeter calibration | ||||
| 3.9.2 | Transfer Standard Calibration | ||||
| 3.9.2.1 | Transfer Standard Calibration Points | ||||
| 3.9.3 | Calorimeter Calibration | ||||
| 3.9.3.1 | AC Reference Standard | ||||
| 3.9.3.2 | DC or AC power supply | ||||
| 3.9.3.3 | Vector network analyzer | ||||
| 3.9.4 | PLWCS Precision RF Power and Frequency Outputs | ||||
| 3.9.4.1 | Output Control | ||||
| 3.9.4.2 | Frequency Range | ||||
| 3.9.4.3 | Freqency Accuracy | ||||
| 3.9.4.4 | Frequency Resolution | ||||
| 3.9.4.5 | Harmonics, non-harmonics, and sub-harmonics | ||||
| 3.9.4.6 | Power Output Range and Accuracy | ||||
| 3.9.4.7 | PowerResolution/Adjustibility | ||||
| 3.9.4.8 | Stability (drift) | ||||
| 3.9.4.9 | Power Display Resolution/Units | ||||
| 3.9.4.10 | Connector output | ||||
| 3.9.5 | PLWCS components | ||||
| 3.9.5.1 | Impedence | ||||
| 3.9.5.2 | High Power RF Load | ||||
| 3.9.5.3 | RF cable | ||||
| 3.9.5.4 | Lab Jacks | ||||
| 3.9.5.5 | Low and High Power transfer standard | ||||
| 3.9.5.5.1 | Low Power Transfer Standard | ||||
| 3.9.5.5.1.1 | Input Power | ||||
| 3.9.5.5.1.2 | Power Measurement Range | ||||
| 3.9.5.5.1.3 | Connector input/output | ||||
| 3.9.5.5.1.4 | Impedence | ||||
| 3.9.5.5.1.5 | Power Display Resolution/Units | ||||
| 3.9.5.5.1.6 | Dimensions | ||||
| 3.9.5.5.1.7 | Weight | ||||
| 3.9.5.5.2 | High Power Transfer Standard | ||||
| 3.9.5.5.2.1 | Input Power | ||||
| 3.9.5.5.2.2 | Power Measurement Range | ||||
| 3.9.5.5.2.3 | Connector input/output | ||||
| 3.9.5.5.2.4 | Impedence | ||||
| 3.9.5.5.2.5 | Power Display Resolution/Units | ||||
| 3.9.5.5.2.6 | Dimensions | ||||
| 3.9.5.5.2.7 | Weight | ||||
| 3.9.5.5.3 | Transit Case | ||||
| 3.9.5.5.3.1 | Transit Case Cover | ||||
| 3.9.5.5.3.2 | Transit Case stacking provisions | ||||
| 3.9.5.5.3.3 | Transit case handles | ||||
| 3.9.5.5.3.3.1 | Hard transit case handles | ||||
| 3.9.5.5.3.4 | Transit case accessory stowage | ||||
| 3.9.5.5.3.5 | Transit case corners | ||||
| 3.9.5.5.3.6 | Transit case insert | ||||
| 3.9.5.5.3.7 | Transit case identification plate | ||||
| 3.10 | Maintainability/Usability | ||||
| 3.10.1 | Fault Isolation | ||||
| 3.10.2 | Preventive Maintenance | ||||
| 3.10.3 | Calibration | ||||
| 3.10.3.1 | Calibration Test Process | ||||
| 3.10.3.2 | Access for Calibration | ||||
| 3.10.4 | Maintenance Provisions | ||||
| 3.11 | Workmanship | ||||
| 3.12 | Wattmeter workload (inlcudes all sub-paragraphs) | ||||
| 3.12.1 | Lear Siegler 164B | ||||
| 3.12.2 | Bird Electronic 43 | ||||
| 3.12.3 | Bird Electronic 4304A | ||||
| 3.12.4 | Bird Electronic 4410 | ||||
| 3.12.5 | Bird Electronic 4410A | ||||
| 3.12.6 | Bird Electronic 4410A2 | ||||
| 3.12.7 | Bird Electronic 4412 | ||||
| 3.12.8 | Telewave 44A | ||||
| 3.12.9 | Bird Electronic 6154 | ||||
| 3.12.10 | Coaxial Dynamics 81000A | ||||
| 3.12.11 | Electro Impulse DPM3 | ||||
| 3.12.12 | Instrument Flight Research TS4317GRM | ||||
| 3.12.13 | Bird Electronic 4301 | ||||
| 3.12.14 | Bird Electronic 4311 | ||||
| 3.12.15 | Bird Electronic 4381 | ||||
| 3.12.16 | Bird Electronic 4131 | ||||
| 3.12.17 | Bird Electronic TS4291P | ||||
| 3.12.18 | Bird Electronic 4314 | ||||
| 3.12.19 | Bird Electronic 4391 | ||||
| 3.12.20 | Bird Electronic 4391M | ||||
| 3.12.21 | Bird Electronic 6104 | ||||
| 3.12.22 | Bird Electronic 612 | ||||
| 3.12.23 | Bird Electronic 6156 | ||||
| 3.12.24 | Lexan Industries 1219-D-001-G | ||||
| 3.12.25 | Bird Electronic 4372 | ||||
| 3.12.26 | Bird Electronic 61 | ||||
| 3.12.27 | Bird Electronic 611 | ||||
| 3.12.28 | Bird Electronic 6835 | ||||
| 3.12.29 | Bird Electronic 694 | ||||
| 3.12.30 | Electro Impulse Laboratory ANURM43C | ||||
| 3.12.31 | Bird Electronic ANURM86A | ||||
| 3.12.32 | Electro Impulse Laboratory ME11BU | ||||
| 3.12.33 | Electro Impulse Laboratory ME11CU | ||||
| 3.12.34 | Electro Impulse Laboratory TS1771U | ||||
| 3.12.35 | Lexan Industries ANURM120 | ||||
| 3.12.36 | Bird Electronic 4421 | ||||
| 3.12.37 | Lexan Industries TS1285URM120 | ||||
| 3.12.38 | Bird Electronic 6151 | ||||
| 3.13 | Workload test point support |
CSS 01-3243 Compliance
| Technical Evaluation | |||||
| Solicitation: N64267-26-R-1003 | |||||
| Contractor: | TBD | ||||
| Paragraph | Title | Meets | Does Not Meet | Complaince Reference in Proposal | Comments |
| 3.0 | Requirements | ||||
| 3.1 | Safety | ||||
| 3.2 | Interchangeability | ||||
| 3.3 | Design and Construction | ||||
| 3.3.1 | Operator adjustments and controls | ||||
| 3.3.1.1 | Operator adjustments | ||||
| 3.3.1.2 | Operator Controls | ||||
| 3.3.2 | Connectors, electric | ||||
| 3.3.3 | Wiring, internal | ||||
| 3.3.1 | Internal Cooling | ||||
| 3.3.4.1 | Cooling devices | ||||
| 3.3.5 | Self-Test capability | ||||
| 3.4 | Digital Interface | ||||
| 3.4.1 | Digital Interface Requirements | ||||
| 3.5 | Electrical power sources and connections | ||||
| 3.5.1 | Electrical Power Source | ||||
| 3.5.1.1 | Nominal and alternate power source | ||||
| 3.5.1.1.1 | Interruption of power source | ||||
| 3.5.1.1.2 | Battery Restricitons | ||||
| 3.5.1.1.2.1 | Lithium Batteries | ||||
| 3.5.2 | Electrical Power connections | ||||
| 3.5.2.1 | Input power cable | ||||
| 3.5.2.2 | Input power switch | ||||
| 3.5.2.3 | Excessive current drain protection | ||||
| 3.5.2.4 | Indicators | ||||
| 3.6 | Enclosure physical characteristics | ||||
| 3.6.1 | Dimensions | ||||
| 3.6.2 | Weight | ||||
| 3.6.3 | Enclosure requirements | ||||
| 3.6.3.1 | Enclosures, console cabinet | ||||
| 3.6.3.2 | Work surfaces, console cabinet | ||||
| 3.7 | Marking and identification | ||||
| 3.7.1 | Marking | ||||
| 3.7.1.1 | Warning Markings | ||||
| 3.7.1.2 | Panel marking and processes | ||||
| 3.7.2 | Equipment identification | ||||
| 3.8 | Environmental Requirements | ||||
| 3.8.1 | Warm-up | ||||
| 3.8.2 | Temperature and Humidity | ||||
| 3.8.3 | Acoustic noise | ||||
| 3.9 | Performance Requirements | ||||
| 3.9.1 | Precision RF Power and Frequency Outputs | ||||
| 3.9.1.1 | Output Control | ||||
| 3.9.1.2 | Frequency Range | ||||
| 3.9.1.3 | Frequency Accuracy | ||||
| 3.9.1.4 | Frequency Resolution | ||||
| 3.9.1.5 | Harmonics, non-harmonics and sub-harmonics | ||||
| 3.9.1.6 | Power Output range and accuracy | ||||
| 3.9.1.7 | Power Resolution/Adjustibility | ||||
| 3.9.1.8 | Stability (drift) | ||||
| 3.9.1.9 | Power Display Resolution/Units | ||||
| 3.9.1.10 | Connector output | ||||
| 3.9.2 | WCS Components | ||||
| 3.9.2.1 | Impedence | ||||
| 3.9.2.2 | High Power RF Load | ||||
| 3.9.2.3 | RF cable | ||||
| 3.9.2.4 | Lab Jacks | ||||
| 3.9.2.5 | Low and high power transfer standard | ||||
| 3.9.2.5.1 | Low Power Transfer Standard | ||||
| 3.9.2.5.1.1 | Input Power | ||||
| 3.9.2.5.1.2 | Power Measurement Range | ||||
| 3.9.2.5.1.3 | Connector input/output | ||||
| 3.9.2.5.1.4 | Impedence | ||||
| 3.9.2.5.1.5 | Power Display Resolution/Units | ||||
| 3.9.2.5.1.6 | Dimensions | ||||
| 3.9.2.5.1.7 | Weight | ||||
| 3.9.2.5.2 | High Power Transfer Standard | ||||
| 3.9.2.5.2.1 | Input Power | ||||
| 3.9.2.5.2.2 | Power Measurement Range | ||||
| 3.9.2.5.2.3 | Connector input/output | ||||
| 3.9.2.5.2.4 | Impedence | ||||
| 3.9.2.5.2.5 | Power Display Resolution/Units | ||||
| 3.9.2.5.2.6 | Dimensions | ||||
| 3.9.2.5.2.7 | Weight | ||||
| 3.9.2.5.3 | Transfer Standard Calibration Points | ||||
| 3.9.2.5.4 | Transit Case | ||||
| 3.9.2.5.5 | Transit Case Cover | ||||
| 3.9.2.5.5.1 | Transit Case stacking porvisions | ||||
| 3.9.2.5.5.2 | Transist case handles | ||||
| 3.9.2.5.5.2.1 | Hard Transit Case handles | ||||
| 3.9.2.5.5.3 | Transit case accessory stowage | ||||
| 3.9.2.5.5.4 | Transit case corners | ||||
| 3.9.2.5.5.5 | Transit case insert | ||||
| 3.9.2.5.5.6 | Transist case identification plate | ||||
| 3.10 | Maintainability/Usability | ||||
| 3.10.1 | Fault Isolation | ||||
| 3.10.2 | Preventitive Maintenance | ||||
| 3.10.3 | Calibration | ||||
| 3.10.3.1 | Calibration Test Process | ||||
| 3.10.3.2 | Access for calibration | ||||
| 3.10.4 | Maintenance provisions | ||||
| 3.11 | Workmanship | ||||
| 3.12 | Workload Support (all 38 sub-paragrahs included) | ||||
| 3.12.1 | Lear Siegler 164B | ||||
| 3.12.2 | Bird Electronic 43 | ||||
| 3.12.3 | Bird Electronic 4304A | ||||
| 3.12.4 | Bird Electronic 4410 | ||||
| 3.12.5 | Bird Electronic 4410A | ||||
| 3.12.6 | Bird Electronic 4410A2 | ||||
| 3.12.7 | Bird Electronic 4412 | ||||
| 3.12.8 | Telewave 44A | ||||
| 3.12.9 | Bird Electronic 6154 | ||||
| 3.12.10 | Coaxial Dynamics 81000A | ||||
| 3.12.11 | Electro Impulse DPM3 | ||||
| 3.12.12 | Instrument Flight Research TS4317GRM | ||||
| 3.12.13 | Bird Electronic 4301 | ||||
| 3.12.14 | Bird Electronic 4311 | ||||
| 3.12.15 | Bird Electronic 4381 | ||||
| 3.12.16 | Bird Electronic 4131 | ||||
| 3.12.17 | Bird Electronic TS4291P | ||||
| 3.12.18 | Bird Electronic 4314 | ||||
| 3.12.19 | Bird Electronic 4391 | ||||
| 3.12.20 | Bird Electronic 4391M | ||||
| 3.12.21 | Bird Electronic 6104 | ||||
| 3.12.22 | Bird Electronic 612 | ||||
| 3.12.23 | Bird Electronic 6156 | ||||
| 3.12.24 | Lexan Industries 1219-D-001-G | ||||
| 3.12.25 | Bird Electronic 4372 | ||||
| 3.12.26 | Bird Electronic 61 | ||||
| 3.12.27 | Bird Electronic 611 | ||||
| 3.12.28 | Bird Electronic 6835 | ||||
| 3.12.29 | Bird Electronic 694 | ||||
| 3.12.30 | Electro Impulse Laboratory ANURM43C | ||||
| 3.12.31 | Bird Electronic ANURM86A | ||||
| 3.12.32 | Electro Impulse Laboratory ME11BU | ||||
| 3.12.33 | Electro Impulse Laboratory ME11CU | ||||
| 3.12.34 | Electro Impulse Laboratory TS1771U | ||||
| 3.12.35 | Lexan Industries ANURM120 | ||||
| 3.12.36 | Bird Electronic 4421 | ||||
| 3.12.37 | Lexan Industries TS1285URM120 | ||||
| 3.12.38 | Bird Electronic 6151 | ||||
| 3.13 | Workload test point support |
SOW Compliance
| Technical Evaluation | |||||
| Solicitation: N64267-26-R-1003 | |||||
| Contractor: | TBD | ||||
| Paragraph | Title | Comply | Does Not Comply | Compliance Reference in Proposal | Comments |
| 5.0 | Requirements | ||||
| 5.1 | Material Requirements | ||||
| 5.2 | Installation & Training Requirements | ||||
| 5.2.1 | Installation | ||||
| 5.3 | Logistic Requirements | ||||
| 5.3.1 | Operator/Service Manual | ||||
| 5.3.2 | Calibration Certificaton and/or Certificate of Conformance Reporting | ||||
| 5.3.3 | Instrument Calibration Procedure | ||||
| 5.3.4 | Software/Firmware Version Description | ||||
| 5.3.5 | Software/Firmware Change Request | ||||
| 5.3.6 | Proposed Spare parts list | ||||
| 5.3.7 | Training Syllabus | ||||
| 5.3.8 | Uncertainty Analysis | ||||
| 5.3.9 | Licensing Documentation | ||||
| 5.3.10 | Source Code | ||||
| 5.3.11 | Warranty | ||||
| 5.3.12 | Warranty sticker |
X
File details come from the government source that posted it. Updated .