Attachment 02 Personnel Qualification.pdf

SOLICITATION: N00173-21-R-ZL01

ATTACHMENT 02

PERSONNEL QUALIFICATIONS

1. Program Manager (Key):

Education:

Must have Master of Science (MS)/ Doctor of Philosophy (PhD) degree in Engineering, Physical Sciences or equivalent from an accredited university.

Security Clearance:

Secret

Experience:

Must be a senior Research and Development (R&D) manager.

Must have a minimum of 8 years of demonstrated experience supporting a research environment with an appropriate knowledge base pertaining to defined overall Statement of Work (SOW).

Must have science and engineering credentials with further expertise in applied and industrial Navy environments, with proven ability to administer Department of Deference

(DoD) sponsored programs.

Experience in technical areas may include, but are not limited to: corrosion science, materials engineering, information technology, Navy/warfighter systems, environmental sciences, alternative power systems, and fleet support.

2. Senior Program Engineer/Scientist (Key):

Must have MS/PhD degree in Engineering, Physical Sciences or equivalent from an accredited university.

Must have a minimum of 5 years of demonstrated experience supporting a research environment with an appropriate knowledge base pertaining to defined overall SOW.

Must have science and engineering credentials with further expertise in applied and industrial Navy environments.

Must have technical writing skills as evidenced by at least two publications as a co-author of the following types within the last 5 years: proceedings, journal articles, abstracts, technical reports, or other scientific or professional publications.

Must have oral communication skills as evidenced by presentations in proceedings, meetings, conference presentation, or other professional gatherings.

Experience in technical areas may include, but are not limited to: corrosion science,

3. Program Engineer/Scientist:

Must have BS degree in Engineering, Physical Sciences or equivalent from an accredited university.

Must have 4 Years demonstrated expertise in performing research programs, engineering analyses, fleet support and appropriate knowledge base pertaining to defined task.

Experience in technical areas may include, but are not limited to: corrosion science,

4. Jr Engineer/Scientist:

Must have BS degree in Engineering, Physical Sciences or equivalent from an accredited university.

Experience in performing applied engineering/scientific research programs, engineering analyses, field activities, Fleet support and appropriate knowledge base pertaining to defined task.

Experience in technical areas may include, but are not limited to: corrosion science,

5. Technician Analyst:

Must have at least a high school diploma or General Equivalency Diploma (GED).

Must have at least 5 years of experience as a laboratory, electrical, or mechanical technician.

Must have a minimum of 5 years of experience in supporting implementation, development, and test instrumentation with regard to marine corrosion experiments.

Must have experience in logistics, management, and execution of programs associated with the experiment and field tests.

Must have at least a Confidential Clearance.

6. Marine Coatings Quality Assurance:

Must be certified as a National Association of Corrosion Engineers (NACE) International

Certified Coating Inspector.

Direct experience of 5 years or more in inspecting the application of marine coatings.

Inspected 10 or more marine-vessel coating efforts.

Direct experience with standards and specifications, with emphasis on Naval Sea Systems

Command (NAVSEA) Quality Assurance and reporting requirements, for application of coating systems, as well as with advanced coating technologies and applications, including solvent-free edge retentive coatings.

Direct experience with environmental regulations—including National Emission

Standards for Hazardous Air Pollutants (NESHAP), Clean Air & Water Acts, Environmental Protection Agency (EPA), and permitting regulations—relevant to ports for which an offer(s) is submitted, as well as with U.S. Navy in-service ship characteristics and maintenance procedures.

7. Paint Application Specialist:

Must be Society for Protective Coatings (SSPC) Marine Plural Component Applicator certified, or certified via NAVSEA approved equivalent, in accordance with NAVSEA

Standard Item 009-32.

Have 2 or more years of experience applying marine coatings with plural component spray systems.

Have 2 or more years of direct experience performing spraying applications in support of

Navy critical coated areas, as defined in NAVSEA Standard Item 009-32.

Direct experience with standards and specifications regarding surface preparation and coating application processes/techniques.

8. Abrasive Blast Professional:

Experience

Must be SSPC-C7, or NAVSEA approved equivalent, certified as required in NAVSEA

Standard Item 009-32.

Direct experience of 2 or more years performing abrasive blast for the application of marine coatings.

At least 2 years of direct experience performing abrasive blast in support of Navy critical coated areas, as defined in NAVSEA Standard Item 009-32.

Direct experience in employing specifications, standards, and the environmental regulations (NESHAP, Clear Air & Water Acts, Environmental Protection Agency, and permitting regulations) relevant to the team locales.

9. Welder, Cutter, Solders and Brazers:

Must be a graduate of high school, trade, industrial or correspondence school for welding

Must have five years of practical experience involving US Navy ships Hull, Mechanical

& Electrical (HM&E) equipment.