Attachment 002 - Salient Characteristics Security Camera System.pdf

Salient Characteristics for upgrade of camera surveillance system

Require upgrade replacement/relocation of camera surveillance system with high-definition cameras and monitoring system with high-capacity recording capability. The system needs to be able to accommodate the current requirement of no less than twelve cameras/views and be capable of handling up to 20 cameras/views for potential future requirements. The system upgrade and addition will expand coverage areas throughout the air freight terminal to enhance terminal security. The purchase and installation of the system will be the responsibility of the awarded company. The installation and billing will need to be completed by 30 Sep 2025.

Display:

• No less than 27” HD monitor for each of the two live viewing client stations and monitors

• Live monitoring workstation

Camera Server:

• Must allow for recording at 15 frames per second and retain footage for at least 500 hrs/64TB storage with retrieval capabilities and located in the room with monitoring station 1

Cameras:

• A total of (8) 32-megapixel multi-sensor cameras that will be corner mounted on the exterior of the building providing a 270-degree field of view. The multi-sensor cameras mounted on the interior will be pendant mounted to the ceiling joists and will provide 360-degree coverage in all directions around the camera. Multi-sensor technology provides the ability to provide multiple camera views from one cat 6 cable run.

• (3) 16-megapixel wall mounted multi-sensor cameras. These cameras must provide a 180-degree view when wall mounted.

• (1) 16-megapixel dual sensor camera.

• Licenses to cover all twelve of the cameras (if required).

Signal boosters (where required):

• Due to the long runs of cable for several of the camera locations, boosters ensure no degradation of transmission to monitoring stations.

Racks & wiring:

• Fully hardwired cat6 wiring infrastructure. There must be a 12U Wall Mount Vertical Mount

Server Depth Low Profile Rack Enclosure Cabinet in the office and (2) Intermediate Distribution Frame (IDF) locations with 12U Performance Wall Mount Server Cabinet Network Rack Enclosure in the field. This will provide the ability to run cameras to the nearest network rack location.

Power:

• 1500VA Rack Mount UPS for each server rack location

• Once awarded and actual requirements are determined, the customer will work through the process for routing to identified locations.

Warranty:

• Standard 2 - 5 year parts and labor