Attachment 0005 - Appendix D - NW Area Lighting Controls.pdf

fit Nr rn io ax tri xig

E-I Om ma

NO

rop. -lx to3

Clipsal® anosiiimmosnlismir

Light Level Sensor

Outdoor FIR Sensor

360° Indoor FIR Sensor

90° Indoor PIR Sensor

360° PIR Multi Sensor

Sensors

Class 1250 flARE D by Schneider Electric measaareassofortmastrafe

Light Level Sensor The Clipsal Light-Level Sensor measures ambient light levels and automatically issues ON, OFF, or ramp commands over a CBusTM network. The light-level sensor can control relays, dimmers, or remotely operated circuit breakers, changing their status according to pre-set ambient lighting levels. The Clipsal light-level sensor has a dynamic range between 5-150 foot candles, and compensates for noise and rapid light intensity fluctuations.

Outdoor Light Level Sensor Clipsal Outdoor Light-Level Sensor measures ambient light levels and automatically issues ON/OFF or ramp commands over a C-Bus network to maintain outdoor lighting levels.

Primarily designed for outdoor use, this light-level sensor is also suitable for indoor setting in which a water resistant casing is desirable.

The light-level sensor can control up to two C-Bus group addresses: one address controls ON/OFF switching of a lamp circuit according to a pre-determined ambient light level, while the other is used to continuously regulate the light-level output of any number of lamps!

The target light level, the margin, and other sensor options are easily configured by using the C-Bus Toolkit software.

• Outdoor use, wall- and ceiling-mounted low-profile unit

• Can maintain a constant illumination level of 5-150 footcandles

• Adjustable lumin setpoint

• Control of up two C-Bus group addresses

• Sensors receive data and power over a single C-Bus twisted-pair cable, so they do not require power packs or line-voltage connections

• 180° field of view

Table 5.13: Clipsal Light Level Sensor

Catalog No.

SLC5031 PE

Catalog Description Eight level sensor, 0. 150fc. indoor Ugh( Level Sensor. 5 150fc, Outdoor SLC5031PEWP

Occupancy Sensors Clipsal occupancy sensors are available for both indoor and outdoor applications. All Clipsal sensors incorporate reliable passive infrared detection (PIR) circuits for occupancy detection along with integral light level sensors to prevent switching of lights if sufficient ambient light is present. Sensors feature programmable adjustments for sensitivity and time delay, walk test LED for commissioning and optical bandpass filtering with dual element detectors to minimize false triggering.

• so' Indoor sensors are intended for wall or ceiling mounting. These sensors have a continuous detection field of 400 square feet and a 90° field of view.

• 360° Indoor sensors are intended for flush mounting in drop ceilings. They have a minor motion detection field of 800 square feet making them ideal for use in offices, copier rooms, closets, and restrooms where it can be mounted in the center of the detection area.

• 360° Multi-Sensors combine a passive infrared receiver (PIR) for occupancy sensing, a light-level sensor, and an infrared remote receiver into a small, highly versatile unit. The multi-sensors 2.8 inch face diameter makes it unobtrusive and ideally suited for flush mounting on the ceiling with effective IR coverage up to 800 square feet. The built-in IR receiver accepts commands from an optional handheld remote controller, making the sensor ideal for classrooms and conference room areas.

• Outdoor PIR Motion Sensor combines reliable thermal-radiation-based control of lighting with rugged construction suitable for outdoor requirements. The unit's advanced circuits and flat multi-segmented lens provide coverage of up to 3000 square feet in a 110' field of view.

Table 5.14: Clipsal Occupancy Sensors

Catalog No.

SLO5750VVPL

Catalog Description

SLC5-753u

Occupancy sensor, multi, outdoor, 110 deg Occupancy sensor, PIR, indoor. 90 deg Occupancy sensor, MP, indoor, 360 deg Occupancy sensor multi. indoor. 360 deg

5-12 DE-8 Discount Schedule ef 2009 Schneider Electric All Rights Reserved

Clipsal® SaturnTM DLTTM Keypads

Clipsal® SaturnTM Dynamic Labeling Technology (DLT7m) Keypads combine a Saturn style glass cover plate, programmable keypad buttons, and easily customized labels on a backlit LCD screen that eliminates the need for custom labels.

These keypads are designed to be easy to install, customize, and use. By virtue of the variety of button configurations available, one compact Saturn Keypad with DLT can take the place of many single-operation switches, ON/OFF toggles, dimmers, and timers. The five keypad buttons are lit with cool blue LEDs that complement the keypad's sleek lines and show the status of controlled devices.

Features

• Button configurations include multi-point switching and dimming. master ON/OFF switching, and scene settings

• Keypads have five physical buttons - four control buttons and one scroll/page button combined with two screens of labels, for a total of eight controllable buttons

• Scene control includes ten group addresses per scene, four scenes per keypad

• Independent timers available for each button

• Time clock can be displayed at the bottom of the screen

• Locator LED can illuminate the keypad, helping a user find it in dim light

• Displays up to 8 languages from a set of more than 65

Functional Aesthetics

• 64 x 128 pixel LCD screen with a white backlight

• Dynamic graphic displays, such as bar graphs, can be enabled or disabled

• Editable LCD labels, available for each button or control group, can display text, symbols, and graphics

Distributed Intelligence

• Compatible with all Clipsal devices and Powerlinks NF3000G3C controllers

• Configured by using Learn Mode or CBusTM Toolkit software

Make the most of your energy5M

El SQUARE D by Schneider Electric

Schneider, ejElectric

Specifications

Saturn' DLT Keypad Cover Plate - Specifying Colors When Ordering

Keypad Assemblies

Order numbers for the Saturn DLT keypads include the stock number (SLC5085DL) and the code for the color of the cover plate:

Black (BK), Mocha (BR), White (WE) and Cream (CM)

For example, SLC5085DLBR represents a complete catalog number for a Saturn DLT keypad with a mocha cover plate.

Additional faceplates are available and are sold separately.

2.95 in.

(75 mm)

Cream (CM)

Mocha (BR)

Black (BK)

White (WE)

4.57 in.

(116 mm)

0.43 in.

(108 mm)

1 13 in (28-8 mm) i r Clipsar SaturrTh DLTrm Keypad 1

Voltage Requirements 15-36 V DC @ 22 mA required for normal operation, drawn from the C-Bus"" network

Number of Units on a Network

Determined with the C-Bus Calculator, a software utility used to evaluate the total network current load

Electrical Isolation 3.75 kV RMS from C-Bus to power (provided externally)

Control Functions Load switching, dimming, timing, scene control

Status Indicators Blue, one dimmable LED per button

Backlight White, dimmable. user configurable

Locator Option User-configurable, adjustable blue LED to help locate the unit in darkness, has "ignore firs;

button press" option

Scene Control Up to four scenes per keypad, ten addresses per scene

Screen 64 x 128 pixels LCD

Timers 1 sec-18 hr. 1 sec intervals

CBusTM Connection One terminal block to accommodate 24-16 AWG (0.2-15 mm2), CAT 5 UTP cable required

Response Time 200 msec or less

Dimensions 4.57 in (L) x 2.95 in. (W) x 1.2 in. (D) [116 mm (L) x 75 mm (W) x 30 mm (D)]

Mounting Plaster mud ring/Single gang box w/minimum internal width 2.05 in. (52 mm) (not provided)

Weight 5.29 oz (150 g)

Operating Environment Temp.: 32°F to 113'F (0°C to 45°C) RH. 95%. noncondensing

Standards UL: Listed 916 Energy Management Equipment CSA 22.2 Spec 205 Signal Equipment FCC: Part 15.101, Class El Digital Device EN61000-4-2 Immunity to ESD

Color Options

Nik.

White, cream, black, and mocna a l

Order Information

/Description Catalog Number

Saturn DLT Keypad w/faceplate

SLC5085DL ( )

Additional Faceplates

DLT Faceplate Cream SLC5085DLFCM

DLT Faceplate Black SLC5085DLFBK

OLT Faceplate Mocha SLC5085DLFBR t DLT Faceplate White SLC5085DLFWE

SI

Schneider Electric - North American Operating Division Square D, the n logo, Ckstsau Saturn, C-Bus and Powerlink are trademarks or registered trademares of Schneider Electr and/or is affiliates in the united States and/or other countries.

295 Tech Park Drive LaVergne TN 37086 Te, 1-888-SQUARED WNW squaredlightingcontroi com ©

S ch n e id e r

E le ct ri c.

A ll ri g h ts r e se rv e d

Document Number 1250H00506R9/08 10-08

SISILIAFIE

a brand of Schneider

Electric

CLIPSAL

LIGHTING CONTROL

View of the Clipsal Outdoor Light-Level Sensor

EI

Square D® Clipsal® Outdoor Light-Level Sensor Square D° Clipsal® Outdoor Light-Level Sensor measures ambient light levels and automatically issues ON/OFF or ramp commands over a C-BusTM network to maintain outdoor lighting levels. Primarily designed for outdoor use, this light-level sensor is also suitable for indoor settings in which a weather-resistant casing is desirable.

The fight-level sensor can control up to two C-Bus group addresses: one address controls ON/OFF switching of a lamp circuit according to a pre-determined ambient light level, while the other is used to continuously regulate the light-level output of any number of lamps.

The target light level, the margin, and other sensor options are easily configured by using the C-Bus Toolkit software.

Features

Outdoor use, wall- and ceiling-mounted low-profile unit

Can maintain a constant illumination level of 5-150 foot-candles

Control of up to two C-Bus group addresses

Receives data and power over a C-Bus network, so the sensors do not require power packs or line-voltage connections

180° field of view

Distributed Intelligence

Compatible with all Clipsal devices and the Square D® Powerlink® NF3000G3C controller

SQUARE El

Specifications

2.5 in.

65mm

4 in.

102 mm

3 3

4 in.

102 rnm

Side view of the Clipsal Outdoor Light-Level Sensor

Schneider Electric - North American Operating Division

295 Tech Park Drive LaVergne, TN 37086 Tel: 1-888-SQUARED wwwisquaredlightingcontrotcom

Outdoor Light-Level Sensor Clipsal C-BusTM supply voltage 15-36 V DC 0 18 mA nominal

Drawn from the C-Bus network

Field of View 180°

Light Level Range Reads: 2-278 footcandles (20-3000 lux) Controls: 5-150 footcandles (40-1600 lux)

C-Bus Connection Screw-type input terminals accommodate 6 x 24 AWG cable (6 x 0.2 mm:').

Connection requires CAT 5 data cable

Max. Units/Network Based on the total network current load and available power.

Conduit openings Sized for 20mm and 25mm conduit tings

Dimensions 4 in. x 4 in. x 2.5 in.

(102mm x 102mm x 65mm)

Weight 10.8 oz (305 g)

Mounting Indoor or outdoor, wall or ceiling Indoor height: At least 6.5 ft. (1.9m) above floor

Operating Environment -22°F to 122°F (-30°C to 50°C) RH: 95%, noncondensing

Standards • FCC Part 15 Complies with FCC Standards for Home or Office Use

Order Information

Description Catalog Number

Outdoor Light-Level Sensor SLC5031PEWP

Square D. and the El logo, Clipsal and C-Bus are trademarks or registered trademarks of Schneider Electric and/or its affiliates in the United States andior other countries.

Document Number 1250H00710 12/07

S ch n e id e r

E le ct ri c.

A ll

R ig h ts

R e s e rv e d

Submitted by Lighting Solutions of Iowa Catalog Number:

LHIRS1

Notes:

Type:

Job Name:

Rock Island ASPI - Multiple Manufacturing Engineer: Shive Hattery Engineers lighting solutions

Building Automation, Inc.

Wall Switch Occupancy Sensors LightHawkTM Passive Infrared Wall Switch Sensor featuring IntellADAPTTm

KEY FEATURES

• All-Digital, Passive Infrared sensor

• IntellADAPT T" Self Adaptive Technology —

No manual adjustment required

• Auto ON or Manual ON operating modes

• 1000 sq. ft., 180° area of coverage

• Built-in photocell with SuperSaver mode

• RhinoTuffrm lens

• Dual 120/277 VAC operation

• No minimum load requirement

• Zero Arc Point Switching

• ETL listed (UL508 Standard)

• Five-year warranty

OVERVIEW

The LightHawk Passive Infrared wall switch occupancy sensor ing passive infrared (PIR) technology for unequaled occupancy patented IntellADAPT technology that continuously analyzes sensitivity and timer adjustments during installation as well nance free "Install and Forget' operation. With selectable operating and a built-in photo sensor for automatic daylight harvesting, simply the most capable wall switch occupancy sensor available

FEATURES and BENEFITS Features

Networked lighting Control Sys- - -

I

LHIRSI LHIRSO

represents the state-of-the-art in sensor technology by utiliz-detection and false trip immunity. The sensor features HBA's its environment and self-adapts, eliminating the need for manual as over the life of the product IntellADAPT provides true mainte-modes - automatic ON/OFF or manual ON/automatic OFF the LightHawk Passive Infrared wall switch occupancy sensor is in the marketplace today.

Benefits IntellADAPT Th° • Sensor automatically determines optimum setting..

• No manual sensitivity and timer adjustments required — providing maintenance free "Install and Forget" operation.

All-Digital, Passive Infrared sensor • Excellent passive infrared long-range motion detection Auto ON or Manual ON operating modes • Provides Auto ON / Auto OFF or Manual ON / Automatic

OFF operation Tamper-proof automatic only version available • Automatically turns lighting loads on and off without requiring user to manually push a button No minimum load requirement • Allows for connection of loads from 0 to full load capacity RhinoTuffTM lens • Impact resistant IR lens Built-in photocell with optional SuperSaver mode • Increases energy savings by preventing the lights from turning on when there is sufficient natural light

• Optional SuperSaver mode — in addition to above, turns lights off during periods of occupancy if ambient light levels increase sufficiently to illuminate the area

Hubbell Building Automation, Inc. 9601 Dessau Road Building One Suite 100 Austin,Texas 78754 (5 I2} 450-1100 {512} 450-1215 fax www hubbell-automation corn

LI-IIRS1

Notes:

Type:

lighting solutions Job Nae:

Rock Island ASPI Multiple - Manufacturing Engineer: Shive Hattery Engineers

SPECIFICATIONS

IntellADAPT T" • Self-adjusting timer

• Self-adjusting passive infrared sensitivity

• Automatic false-on, false-off corrections

• No manual adjustments required

Timer Timeout • Automatic mode: 4-30 minutes, self adjusts based on occupancy

• Fixed mode: 4, 8, 15 and 30 minutes

• Test mode: 5 seconds

Passive Infrared • Dual element pyrometer and 12 element cylindrical RhinoTuff lens

Photocell • Adjustable ambient light override ranges from 10 foot-candles to 500 foot-candles

Coverage • 1000 sq. ft., 180° Power Requirements • I 20/277VAC, 50/60Hz Electrical Ratings • 120VAC: 800W Incandescent, 1000W Fluorescent, 116 HP

• 277VAC: 1800W Fluorescent, 1/6 HP Load Requirements • No minimum load Operating Environment • Indoor use only

• Operating temperature: 32° — 104° F (0° — 40° C)

• 0% to 95% relative humidity, non-condensing

Construction • Housing —high impact, injection-molded plastic (UL-94-5V)

• Impact resistant lens

• Color-coded leads are 6" long

Size & Weight • Size: 4.2" x 1.8" x 2.1", extends out 37"

• Weight: 2.9 oz

Color • White, Ivory, Light Almond, Gray. Black Mounting • Single gang NEMA style switch box

(Decorator style wall plate not included) Certifications • ETL Listed (Conforms to UL STD 508 Certified to CAN/CSA

STD C22.2 NO. 14)

Warranty • 5 years

HOW TO ORDER

Catalog Number Description LHIRSI* "Passive Infrared Wall Switch. Sensor with IntelIADAPT and AutomatitThanu Control, 120/2 AC LHIRSO* Passive Infrared Wall Switch Sensor with IntelIADAPT and Automatic Only Control, 120/277VAC Specify finish

* = W — White, I — Ivory, A — Light Almond, G — Gray, 3 — Black

RANGE DIAGRAM WIRING DIAGRAM

*Refer to Application Guide.

c--,1"'

,. 411). 0

Single Circuit

• i0. Motion

HUBBELL Building Automation, Inc.

Hubbell Building Automation, Inc.

5601 Dessau Road Building One Suite 100

Austin.Texas 78754 {512)i 450-1 100 (512}450-1215 fax hba-wall-lhir-2.2006-3a www hubbell-automation corn

OMNIDT2000

Notes:

Type:

J ob Name:

Rock Island

P AS I Multiple

Manufacturing Engineer. Shive Hattery Engineers lighting solutions

Building Automation, Inc.

Ceiling and Wall Mount Occupancy Sensors t 01071-m Dual Technology Ultrasonic and Passive , in, ifig.

Infrared Ceiling Sensor featuring IntelliDAPT®

KEY FEATURES , \

• IntelliDAPT self-adaptive technology—no manual adjustment 1 • t required

• All-digital dual technology (ultrasonic [US] and passive infrared

[PIR]) sensor

• Non-volatile memory for sensor settings

• 500-2,000 square-foot coverage area (depending on model)

• Optional relay and photocell control

• Optional Quick to Install (QTI) connector

• UL and cUL listed

• 5-year warranty

ONDilDT2000 OVERVIEW The OMNIDT combines ultrasonic (US) and passive infrared (PIR) technologies to turn lighting on and off based on occupancy.

This dual technology provides accurate turn-ons while virtually eliminating false-offs. This sensor features Hubbelll Building Automation's patented IntelliDAPT technology, which makes all the sensor adjustments automatically. Throughout the product's lifespan, smart software analyzes the controlled area and makes digital adjustments to sensitivity and timer settings. Occupancy sensors with IntelliDAPT provide a maintenance-free - Install and Forget" operation.

FEATURES and BENEFITS Features Benefits IntelliDAPT technology • Sensor automatically determines the ideal setting for an area

• Excellent false trip immunity (for improved accuracy)

• No manual sensitivity and timer adjustments required

• Provides a maintenance-free "Install and Forget" operation.

All-digital dual technology (ultrasonic [US] and passive infrared • Superior US minor-motion detection with excellent PR long- IPIRD sensor range major-motion detection Non-volatile memory for sensor settings • Learned and adjusted settings will not be lost during power outages Optional relay and photocell control • Easy integration with Building Automation Systems

• Increases energy savings by preventing lights from turning on when there is sufficient natural light

Optional Quick co Install (QTI) connector • Dramatically reduces installation costs by removing the time-consuming process of manually wiring a sensor to a power pack

• Easy to install; fast and efficient: no cutting, stripping, or wire nuts required

APPLICATIONS

• Offices

• Small conference rooms

• Break rooms

Hubbell Building Automation, Inc. 9601 Dessau Road Building One Austin, Texas 78754 512) 450-1100 (512} 450-1215 fax hubbe ll-automation.com

13009

OMNIDT2000

Notes:

Type:

lighting solutions Job Name:

Multiple Rock Island ASPI -

Manufacturing Engineer: Skive Hattery Engineers

SPECIFICATIONS

IntelliDAPT • Auto reset from test setting

• Self-adjusting timer

• Self-adjusting ultrasonic and passive infrared thresholds

• Automatic false-on/false-off corrections

LED lamp • Red—infrared motion

• Green—ultrasonic motion

Timer timeout • Automatic mode: 8-30 min. (self-adjusts based on occupancy)

• Test mode: 8 seconds (for an easy check at installation)

Ultrasonic (US) output • OMNIDT500: 40kHz output

• OMNIDT1000 and OMNIDT2000: 32kHz

Passive infrared (PIR) • Dual-element pyrometer and 12-element cylindrical rugged lens RP option • Relay and photocell included

• Relay: NO + NC contacts; SPDT; 500 mA rated @ 24VDC;

three-wire isolated relay

• Photocell: adjustable natural-light override ranges from 0 to 100 foot-candles (0-1.000 lux)

Coverage • 500-2,000 square feet (depending on model) Power requirements • 24 VDC, 33 mA (uses UVPP and MP-Series power pack—not included) Output • 24 VDC active high-logic control signal with short circuit protection and optional dry contact (see: RP Option) Operating environment • Indoor use only

• Operating temperature: 32° -104° F (0° -40° C)

• Relative humidity (non-condensing): 0%-95%

Construction • Casing—rugged, high-impact, injection-molded plastic NE, ABS Cycolac (UL-945VA) flame class racing, UV inhibitors

• Color-coded leads are 6" long Size and weight • Size: 4.5" diameter, 13" height (1 14 mm diameter, 38mm height)

• Weight: 5.0 oz (I42g)

Color • Off white Mounting • Mounting base provided

• Recommended MAX Mounting height: 12ft.

Certifications • UL and cUL listed Warranty • 5 years

HOW TO ORDER

Catalog Number Description Color Coverage OMNIDT500 Ultrasonic and RR Ceiling Sensor with IntelliDAPT Off White 500 sq. ft.

OMNIDT5OORP Ultrasonic and PIR Ceiling Sensor with IntelliDAPT (Relay and Photocell) Off White 500 sq. ft.

OMNIDT1000 Ultrasonic and FIR Ceiling Sensor with IntelliDAPT Off White 1,000 sq. ft.

OMNIDTIOOORP Ultrasonic and PIR Ceiling Sensor with IntelliDAPT (Relay and Photocell) Off White 1,000 sq. ft.

OMNIDT2000 (Ultrasonic. and FIR Ceiling Sensor with IntelliDAPT Off White 2000 sq. ft OMNIDT2000RP Ultrasonic and PIR Ceiling Sensor with IntelliDAPT (Relay and Photocell) Off White 2000 sq. ft.

*Add QTI to end of catalog number for optional Quick To Install connector.

IlliN

DT500 ,

, Range t .

Dingrom I eia—L-1

IS

See I ' Ss

,--.--.77:

( HUBBEU- r Building Automation, Inc. „.—

DTI000 Hubbell Building Automation, Inc.

Range Diagram 9601 Dessau Road Building One Austin, Texas 78754

DT2000 [512} 450-1100 (512} 450-1215 fax Range Diagram hubbell-automation.com

OMNIDT500

Notes:

Type:

Job Name:

Rock Island ASPI - Multiple Manufacturing Engineer: Shive Hattery Engineers lighting solutions

0 Building Automation, Inc.

Ceiling and Wall Mount Occupancy Sensors Oj\iJTM Dual Technology Ultrasonic and Infrared Ceiling Sensor featuring IntelliDAPT®

KEY FEATURES

• IntelliDAPT self-adaptive technology—no manual adjustment required

• All-digital dual technology (ultrasonic [US] and passive infrared

[PIR]) sensor

• Non-volatile memory for sensor settings

• .500-2,000 square-foot coverage area (depending on model)

• Optional relay and photocell control

• Optional Quick to Install (QTI) connector

• UL and cUL listed

• 5-year warranty

OVERVIEW

The OMNIDT combines ultrasonic (US) and passive infrared This dual technology provides accurate turn-ons while virtually Automation's patented IntelliDAPT technology, which makes lifespan, smart software analyzes the controlled area and makes sensors with IntelliDAPT provide a maintenance-free "Install

FEATURES and BENEFITS Features

Passive R den I iht on occupancy.

Building the product's Occupancy

ONINIDT2000

(PIR) technologies to turn lighting on and off based eliminating false-offs. This sensor features Hubbell!

all the sensor adjustments automatically. Throughout digital adjustments to sensitivity and timer settings.

and Forget" operation.

Benefits IntelliDAPT technology • Sensor automatically determines the ideal setting for an area

• Excellent false trip immunity (for improved accuracy)

• No manual sensitivity and timer adjustments required

• Provides a maintenance-free "Install and Forget" operation.

All-digital dual technology (ultrasonic [US] and passive infrared • Superior US minor-motion detection with excellent PIR long- [PIR]) sensor range major-motion detection Non-volatile memory for sensor settings • Learned and adjusted settings will not be lost during power outages Optional relay and photocell control • Easy integration with Building Automation Systems

• Increases energy savings by preventing lights from turning on when there is sufficient natural light

Optional Quick to Install (QTI) connector • Dramatically reduces installation costs by removing the time-consuming process of manually wiring a sensor to a power pack

• Easy to install; fast and efficient; no cutting, stripping, or wire nuts required

APPLICATIONS

• Offices

• Small conference rooms

• Break rooms

Hubbell Building Automation, Inc. 9601 Dessau Road Building One Austin. Texas 78754 (512} 450-1100 (5121 450-1215 fax hubbell-automation.com

12009

OMNIDT500

Notes:

Type:

lighting Job

Rock W Nam and ASePI - Multiple Manufacturing Engineer: Shive Hattery Engineers solutions

SPECIFICATIONS

IntelliDAPT • Auto reset from test setting

• Self-adjusting timer

• Self-adjusting ultrasonic and passive infrared thresholds

• Automatic false-on/false-off corrections

LED lamp • Red—infrared motion

• Green—ultrasonic motion

Timer timeout • Automatic mode: 8-30 min. (self-adjusts based on occupancy)

• Test mode: 8 seconds (for an easy check at installation)

Ultrasonic (US) output • OMNIDT500: 40kHz output

• OMNIDT1000 and OMNIDT2000: 32kHz

Passive infrared (PIR) • Dual-element pyrometer and 12-element cylindrical rugged lens

RP option • Relay and photocell included

• Relay: NO + NC contacts; SPDT: 500 mA rated @ 24VDC:

three-wire isolated relay

• Photocell: adjustable natural-light override ranges from 0 to

100 foot-candles (0-1,000 lux) Coverage • 500-2,000 square feet (depending on model)

Power requirements • 24 VDC, 33 mA (uses UVPP and MP-Series power pack—not included)

Output • 24 VDC active high-logic control signal with short circuit protection and optional dry contact (see: RP Option)

Operating environment • Indoor use only

• Operating temperature: 32° -104° F (0°-40° C)

• Relative humidity (non-condensing): 0%-95%

Construction • Casing—rugged, high-impact, injection-molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors

• Color-coded leads are 6" long

Size and weight • Size: 4.5" diameter, 1.5" height (114 mm diameter, 38mm height)

• Weight: 5.0 oz (I 42g)

Color • Off white Mounting • Mounting base provided

• Recommended MAX Mounting height: 12ft.

Certifications • UL and cUL listed

Warranty • 5 years

HOW TO ORDER

Catalog Number Description Color Coverage

OMNIDT500 Ultrasonic and PR Ceiling Sensor with IntelliDAPT Off White 500 sq. ft. I

OMNIDT5OORP

OMNIDTI000

OMNIDTIOOORP

OMNIDT2000

OMNIDT2000RP

"Add QTI to end

Ultrasonic Ultrasonic Ultrasonic Ultrasonic Ultrasonic of catalog number and PIR Ceiling Sensor with and FIR Ceiling Sensor with and PIR Ceiling Sensor with and PIR Ceiling Sensor with and PIR Ceiling Sensor with for optional Quick To Install

IntelliDAPT (Relay and Photocell) IntelliDAPT IntelliDAPT (Relay and Photocell)

IntelliDAPT IntelliDAPT (Relay and Photocell) connector.

Di500 z

Off White 500 sq. ft.

Off White 1,000 sq. ft.

Off White 1.000 sq. ft.

Off White 2000 sq. ft.

Off White 2000 sq. ft.

I 22.

9- '

S illik :

Range Diagram r n.

H --,--

Inc.

78754

Building Automation, Automation, Inc.

Building One Austin, Texas

0121 450-1215 fax r _1 HUBBEU- i -t....zi.d.,=>"

Hubbell Building 9601 Dessau Road

{512} 450-1100 hubbell-automation.com

32"

DT1000

Range Diagram

5.

ke

DT2000

Range DI ilgrG171

OMNIUS2000

Notes:

Type:

Job Name:

Rock Island ASPI - Multiple Manufacturing Engineer: Shove Hattery Engineers lighting solutions

Building Automation, Inc.

Ceiling and Wall Mount Occupancy Sensors OillY/Tm Ultrasonic Ceiling Sensor featuring IntellADAPTTh

KEY FEATURES

• IntellADAPT Technology - Continuous self-adapting sensor

• All-Digital, Ultrasonic sensor

• Non-volatile memory

• 500 to 2000 sq. ft. coverage

• Optional relay and photocell control

• Optional Quick To Install (QTI) connector

• UL and cUL listed

• Five-year warranty

OVERVIEW

The OMNI Ultrasonic ceiling mount occupancy sensor uses on occupancy. Designed specifically for use in areas where tasks tions (typically columns, cubicals, stalls or filing cabinest) would Ultrasonic sensor features Hubbell Building Automation's patented environment and adapts to meet those specific challenges. This adjustments during installation and over the life of the product

FEATURES and BENEFITS Features

NPhotnriceri i fighting Control Sr— ' lllfff

ONINIUS2000

ultrasonic (US) technology to turn lighting systems on and off based entail minor motion for long periods of time or where obstruc-obstruct the line of site for an IR mothion detector. The OMNI IntellADAPT Th' technology which continuously analyzes the exclusive technology eliminates manual sensitivity and timer

— providing true maintenance free "Install and Forget' operation.

Benefits IntellADAPTTm • Sensor automatically determines optimum setting to properly cover the area.

• Excellent false tripping immunity

• No manual sensitivity and timer adjustments — providing maintenance free "Install and Forget" operation.

All-Digital, Ultrasonic sensor • Superior minor motion detection.

Non-volatile memory • Learned and adjusted settings will not be lost during power outages Optional relay and photocell control • Easy integration with Building Automation Systems

• Increases energy savings by preventing the lights from turning

• on when there is sufficient natural light.

Optional Quick To Install (QTI) connector • Dramatically reduces installation costs by removing the time consuming process of manually wiring sensor to power pack

• Easy to install, fast and efficient — no cutting, stripping, orwire nuts required to install.

APPLICATIONS

• Hallways

• Restrooms

Hubbell Building Automation, Inc. 960 Dessau Road Building One Suite 100 Austin, Texas 78754 (512} 450-1100 (512} 450-1215 fax

OMNIUS2000

Notes:

Type:

Job Name:

Rock Island ASPI - Multiple Manufacturing Engineer: Shive Flattery Engineers lighting solutions

SPECIFICATIONS

IntellADAPT TM • Auto reset from test setting

• Self-adjusting timer

• Self-adjusting ultrasonic thresholds

• Automatic false-on, false-off corrections

LED Lamp • Green — Ultrasonic motion

Timer Timeout • Automatic mode: 8 min. to 32 min. (Self adjusts based on occupancy)

• Test mode: 8 seconds — for easy check at installation

Ultrasonic output • OMNIUS500: 40kHz output

• OMNIUSI000 & OMNIUS2000: 32kHz

RP Option • Relay and Photocell Included (both)

• Relay: NO + NC contacts, SPDT, 500 mA rated @ 24VDC, three wire, isolated relay

• Photocell: Adjustable ambient light override ranges from

0 foot candles (0 lux) CO 100 foot candles (1000 lux)

Coverage (depending de endin on model

Power Requirements - 24 VDC. 33 mA (uses MP-Series power pack— not included)

Output • 24 VDC active high logic control signal with short circuit protection and optional dry contact (see —RP Option)

Operating environment • Indoor use only

• Operating temperature: 32° — 104° F (0° to 40° C)

• 0% to 95% relative humidity, non-condensing

Construction • Housing — Rugged, high impact, injection molded plastic KJB

ABS Cycolac (UL-945VA) flame class rating, UV inhibitors

• Color-coded leads are 6" long

Size & Weight • Size: 4.5" dia, 1.5" height (I 14 mm dia., 38mm height)

• Weight: 5.0 oz (I 42g)

Color • Off White

Mounting • Mounting base provided with sensor

Certifications • UL and cUL Listed

Warranty • 5 years

HOW TO ORDER

Catalog Number Description Color Coverage

OMNIUS500 Ultrasonic Ceiling Mount Sensor with IntellADAPT White 500 sq. ft.

OMNIUSSOORP Ultrasonic Ceiling Mount Sensor with InteIlADAPT (Relay and Photocell) White 500 sq. ft.

OMNIUS 1000 Ultrasonic Ceiling Mount Sensor with IntellADAPT White 1000 sq. ft.

nMNll c I mop P I 1144cnnir rwiling mn, 66, Rwww wick Inroll A nAPT (Reay 6661 Pk 4tnrall) WInito IOM cri 4

OMNIUS2000 Ultrasonic Ceiling Mount Sensor with IntellADAPT White 2000 sq. ft

OMNIUS2000RP

*Add QTI to end

RANGE DIAGRAMS

Ultrasonic Ceiling Mount Sensor with IntellADAPT of catalog number for optional Quick To Install F

(Relay and Photocell) White connector.

2000 sq. ft.

Inc.

Diagram is

56'

US

not provided.

HUBBELL

Hubbell 9601 Dessau

(512)450-1100 www

Inc.

Suite fax cam

-2000 Range Diagram

Building Automation, Building Automation, Road Building One

Austin.Texas 78754 (512} 450-1215 hubbell-automation

US-2000 Range Diagram - hallway application

05-1000 Range US-S00 Range Pattern hba•ceil-omnius-7.05-3a

OMNIUS1000

Notes:

Type:

Job :

Rock I

Name sland ASPI - Multiple

Manufacturing Engineer: Shive Hattery Engineers lighting solutions

<CO)

Building Automation, Inc.

Ceiling and Wall Mount Occupancy Sensors alIN/Thr Ultrasonic Ceiling Sensor featuring IntellADAPTTm

KEY FEATURES

• IntelIADAPT Technology - Continuous self-adapting sensor

• All-Digital, Ultrasonic sensor

• Non-volatile memory

• 500 to 2000 sq. ft coverage

• Optional relay and photocell control

• Optional Quick To Install (QTI) connector

• UL and cUL listed

• Five-year warranty

OVERVIEW

The OMNI Ultrasonic ceiling mount occupancy sensor uses on occupancy. Designed specifically for use in areas where tions (typically columns, cubicals, stalls or filing cabinest) would Ultrasonic sensor features Hubbell Building Automation's patented environment and adapts to meet those specific challenges.

adjustments during installation and over the life of the product

FEATURES and BENEFITS Features histimirkpri Lighting Control Syt,t'

OMNILS2000

ultrasonic (US) technology to turn lighting systems on and off based tasks entail minor motion for long periods of time or where obstruc-obstruct the line of site for an IR mothion detector. The OMNI IntellADAPTTM technology which continuously analyzes the

This exclusive technology eliminates manual sensitivity and timer

— providing true maintenance free "Install and Forget" operation.

Benefits IntellADAPT TM • Sensor automatically determines optimum setting to properly cover the area.

• Excellent false tripping immunity

• No manual sensitivity and timer adjustments — providing maintenance free "Install and Forget" operation.

All-Digital, Ultrasonic sensor • Superior minor motion detection.

Non-volatile memory • Learned and adjusted settings will not be lost during power outages Optional relay and photocell control • Easy integration with Building Automation Systems

• Increases energy savings by preventing the lights from turning

• on when there is sufficient natural light.

Optional Quick To Install (QTI) connector • Dramatically reduces installation costs by removing the time consuming process of manually wiring sensor to power pack

• Easy to install, fast and efficient — no cutting, stripping, orwire nuts required to install.

APPLICATIONS

• Hallways

• Restrooms

Hubbell Building Automation, Inc. 960 Dessau Road Building One Suite 100 Austin, Texas 78754 {512} 450-1100 (5121 450-1215 fax

OMNIUS1000

Notes:

Type:

Job Name:

Rock Island ASPI - Multiple Manufacturing Engineer: Shiva Hattery Engineers lighting solutions

SPECIFICATIONS

IntellADAPTT" • Auto reset from test setting

• Self-adjusting timer

• Self-adjusting ultrasonic thresholds

• Automatic false-on, false-off corrections

LED Lamp • Green — Ultrasonic motion Timer Timeout • Automatic mode: 8 min. to 32 min. (Self adjusts based on occupancy)

• Test mode: 8 seconds — for easy check at installation

Ultrasonic output • OMNIUS500: 40kHz output

• OMNIUS 1000 & OMNIUS2000: 32kHz

RP Option • Relay and Photocell Included (both)

• Relay: NO + NC contacts, SPDT, 500 mA rated @ 24VDC, three wire, isolated relay

• Photocell: Adjustable ambient light override ranges from

0 foot candles (0 lux) to 100 foot candles (1000 lux) Coverage • 500 to 2000 sq. ft. (depending on model) Power Requirements • 24 VDC. 33 mA (uses MP-Series power pack — not included) Output • 24 VDC active high logic control signal with short circuit protection and optional dry contact (see —RP Option) Operating environment • Indoor use only

• Operating temperature: 32° — 104° F (0° to 40° C)

• 0% to 95% relative humidity, non-condensing

Construction • Housing — Rugged, high impact. injection molded plastic KA ABS Cycolac (UL-945VA) flame class rating, UV inhibitors

• Color-coded leads are 6" long Size & Weight • Size: 4.5" dia.. 1.5" height (1 14 mm dia., 38mm height)

• Weight: 5.0 oz (142g) Color • Off White Mounting • Mounting base provided with sensor Certifications • UL and cUL Listed Warranty • 5 years

HOW TO ORDER

Catalog Number Description Color Coverage OMNIUS500 Ultrasonic Ceiling Mount Sensor with IntelIADAPT White 500 sq. ft.

OMNIUS500RP Ultrasonic Ceiling Mount Sensor with IntellADAPT (Relay and Photocell) White 500 sq, ft.

OMNIUS1000 Ultrasonic Ceiling Mount Sensor with IntellADAPT . White I000 sq. ft, UMNIUS I USURP

OMNIUS2000

OMNIUS2000RP

*Add QTI to end of

RANGE DIAGRAMS

Ultrasonic Ceiling Mount Sensor with IntellAUAY1 Ultrasonic Ceiling Mount Sensor with IntellADAPT Ultrasonic Ceiling Mount Sensor with IntellADAPT catalog number for optional Quick To Install

(Relay and Photocell) White White

(Relay and Photocell) White connector.

IPSO sq. tr.

2000 sq. ft.

2000 sq. ft.

Inc.

a

Diagram is

56'

US

not provided.

Hubbell

9601 Dessau

(512) 450-1100 www

Inc.

Suite fax com

;ig I af US -20 00 Range Diagram - hallway application

US-1000 Range US-500 Range Pattern hba-veil-omnius-7.05-3a

-2000 Range Diagram

Building Automation, Building Automation, Road Building One

Austin.Texas 78754 (512} 450-1215 hubbell-automation

UVPP

Notes:

Type:

Job Name;

Rock Island ASPI - Multiple Manufacturing Engineer Shive Hattery Engineers

Fighting solutions

0 Building Automation, Inc, Power Packs and Relays

Universal Voltage Power Pack

KEY FEATURES

• Universal voltage — 100 to 277VAC, 50/60Hz

• Automatic voltage detection

• Capable of switching up to 20 Amps of electrical load

• Regulated 24VDC current, 150mA output, short circuit

• Zero Arc Point Switching

• Plenum rated

• Mounts inside or outside junction box, or inside fluorescent ballast cavity

• Available with exclusive QTI (Quick-To-Install) system

• UL and cUL Listed

• 5 year warranty

OVERVIEW

The Universal Voltage Power Pack is a self-contained transformer choosing the correct power pack to use with low voltage 24VDC cally detects input line voltage from I00-277VAC, eliminating require special wiring based on the input voltage. The Universal tures Zero Arc Point Switching technology that minimizes relay pack can be used to supply power to up to four sensors, and multiple circuits. The Universal Voltage Power Pack is plenum

FEATURES and BENEFITS Features

FnPrgy Saving I fighting Controls.

in and automati-packs that loads and fea- A single power auxiliary relay for box.

protected and relay that is designed to eliminate the guesswork occupancy sensors. The power pack supports the need for voltage-specific power packs or power Voltage Power Pack is capable of switching 20A contact wear associated with high inrush loads.

can also be used to supply power to the MPSA rated and mounts easily inside or outside a junction

Benefits Universal Voltage — 100 to 277VAC, 50/60Hz • No more guessing which voltage-specific power pack to use for your applications — one power pack for all of your 100-277VAC needs.

Automatic voltage detection • No more "specialized wiring" required which you can easily get wrong with multi-voltage power packs. The Universal Voltage Power Pack is wired the same for all applications and automatically detects the line voltage being used.

Zero Arc Point Switching • Minimizes relay contact wear associated with high inrush loads.

Plenum rated • Complies with requirements for use in a compartment handling conditioned air (plenum).

Optional Quick To Install (QTI) connector • Easy to install, fast and efficient— no cutting, stripping or wire nuts required to install.

• Dramatically reduces installation costs by removing the time consuming process of manually wiring sensor to power pack.

Hubbell Building Automation, Inc. 9601 Dessau Road Building One Suite 100 Austin. Texas 78754 {512) 450-1100 (512} 450-1215 fax hubbell-automation corn

UVPP

Notes:

Type:

'Fizr?cii?i!laancTAL_ Multiple Manufactunng Engineer: Shive flattery Engineers lighting solutions

SPECIFICATIONS

Power Requirements 100-277VAC, 50/60Hz

Output 24VDC, 150mA nominal, isolated and regulated

Relay Contact Rating 20A, 120VAC Incandescent 20A, 120 or 277VAC Ballast IHP, 120 or 277VAC Motor Load

Construction High impact UL 94-5V plastic

Plenum Rated Complies with requirements for use in a compartment handling conditioned air (plenum) Plenum rated for external junction box mounting

Operating environment Indoor use only

Operating temperature: 32°- 104°F (0°- 40°C)

0% to 95% relative humidity. non-condensing

Size 3.69"L x 2.33"W x 1.36"H

Color Black

Certifications UL and cUL Listed

Warranty

How To Order Catalog Number Description

Universal Voltage Power Pack. 100-277VAC, catalog number for optional Quick To Install

5 years

50/60Hz connector.

inc.

UVPP

*Add QTI to end of

*x 1

P7 x"......kain :

:as 32_1'

,,...ix,so,..A. w --.-m p e e

1-&e_el -It if--Th Building Automation, Hubbell Building Automation, Inc.

9601 Dessau Road Building One Suite

Austin,Texas 78754

(512) 450-1 100 {512}450-1215 fax

C-BusTM Sensors

Class 1250 ScNd gfrElectricer

M oo as -is rip on Zo Oa rem

NO

sr -Ia mz

Light Level Sensor t 360° Indoor PIR Sensor

Outdoor PIR Sensor

90° Indoor PIR Sensor ea

360° PIR Multi Sensor vnew.schnelderaloctric.us Light Level Sensor The C-Bus Light-Level Sensor measures ambient light levels and automatically issues ON, OFF, or ramp commands over a C-Bus network. The light-level sensor can control relays, dimmers, or remotely operated circuit breakers, changing their status according to pre-set ambient lighting targets. The C-Bus light-level sensor has a dynamic range between 5-150 foot candles, and compensates for noise and rapid light intensity fluctuations.

Outdoor Light Level Sensor C-Bus Outdoor Light-Level Sensor measures ambient light levels and automatically issues ON/OFF or ramp commands over a C-Bus network to maintain outdoor lighting levels.

Primarily designed for outdoor use, this light-level sensor is also suitable for indoor setting in which a water resistant casing is desirable.

The light-level sensor can control up to two C-Bus group addresses: one address controls ON/OFF switching of a lamp circuit according to a pre-determined ambient light level, while the other is used to continuously regulate the light-level output of any number of lamps!

The target light level, the margin, and other sensor options are easily configured by using the C-Bus Toolkit software.

• Outdoor use, wall- and ceiling-mounted low-profile unit

• Can maintain a constant illumination level of 5-150 footcandles

• Adjustable lumin setpoint

• Control of up two C-Bus group addresses

• Sensors receive data and power over a single C-Bus twisted-pair cable, so they do not require power packs or line-voltage connections

• 180° field of view

Table 5.1: C-Bus Light Level Sensor Catalog No. Catalog Description

Light level sensor, D-150 Foot-candles, Indoor Light La'S Sensor, 5 - ISO Fect-candlea Outdoor

$ Price 2011.00 278.00

Occupancy Sensors C-Bus occupancy sensors are available for both indoor and outdoor applications. All C-Bus sensors incorporate reliable passive infrared detection (PIR) circuits for occupancy detection along with integral light level sensors to prevent switching of lights if sufficient ambient light is present. Sensors feature programmable adjustments for sensitivity and time delay, walk test LED for commissioning and optical bandpass filtering with dual element detectors to minimize false triggering.

• 90° Indoor sensors are intended for wall or ceiling mounting. These sensors have a continuous detection field of 400 square feet and a DO° field of view.

• 360' Indoor sensors are intended for flush mounting in drop ceilings. They have a minor motion detection field of 500 square feet making them ideal for use in offices, copier rooms, closets, and restrooms where it can be mounted in the center of the detection area.

• 360' Multi-Sensors combine a passive infrared receiver (PIR) for occupancy sensing, a light-level sensor, and an infrared remote receiver into a small, highly versatile unit. The multi-sensors 2.8 inch face diameter makes it unobtrusive and ideally suited for flush mounting on the ceiling with effective 41 coverage up to 800 square feet. The built-in IR receiver accepts commands from an optional handheld remote controller, making the sensor ideal for classrooms and conference room areas.

• Outdoor PIR Motion Sensor combines reliable thermal-radiation-based control of lighting with rugged construction suitable for outdoor requirements. The unit's advanced circuits and flat multi-segmented lens provide coverage of up to 3000 square feet in a 110' field of view.

Table 5.2: C-Bus Occupancy Sensors Camden No. Catalog DeibenPben $ Price

Occupancy sensor. multi. outdoor, 110 deg 283.00 Occupancy sensor, PIR, indoor, 90 deg 227.00 Occupancy sensor, RR, Indoor, MO deg 213.00 Occupancy sensor, multi, indoor, 360 deo 288.00

5-19 DE-8 0 2009 Schneider Electric

Al Rights Reserved

Schneider crEhactric

Powerlink® Lighting

Control Systems Gen 3 Products

Class 1210 www echneider-elec ric.us

Device Power Supply

Powedink Device Router

Table 5.1: Remote Mount Controller (for externally mounted electronics Includes NEMA 1 enclosure, controller, and power supply

Voltage Catalog No. Controller Type $ Price

12W NF500G3 3272.00

240V ^ ' 1 Th ) t , NF500G3 3272.00

277V H'..,_ , ,N L., ,- NE500133 3272.00

12W - V. ' x. ^ ,( ,. -,- NF100ON2G3 9615.00

2400 NE100042133 9815.00

277V i-Vf. “ ^ 2' .2 ' NF10013N2G3 9615.00 12W PVC' t _ NF1003G3 5294.00

240V NE100033 5294.00

277V Par' X CC '.2 - NF1000G3 5094.00 12W F-^ 'C2 A: ( C. _, NF2C0nm 8435.00 240V rpe) XrG 12 NF2000G3 8435.00

277V PMC,XCG;".'- ' NF2000G3 8435.00

12W FvC.2.N CC ..:' 2: NF3000G3 9606.00 24W PM1'C'2.4.(<, -2-t ' NF3000G3 9806.03 277V F r. C3,TrG.:2-- NF3000G3 9606.00 120V -P.., C:C..)C3C. 4 .-r: NF300063C 9606.00 24W a., ryci..1., C2-1 ' NF3000G3C 9606.00 277V '... C.....-tc C,C2 ' NPsornonr 9606.00

Device Power Supply The Powerlink Device Power Supply is used to distribute power on a CBusTM network.

Placed at critical points on the network, device power supplies will provide the current necessary for operating a variety of passive C-Bus devices. A Powerlink Device Power Supply consists of an 8M enclosure containing one or two 4M Power Supplies (120 or 277Vac).

• Surface-mount NEMA 1 enclosure, with cover

• Unit and C-Bus LEDs indicate the status of the line voltage and the network

• Sources up to 700 mA (dual power supplies) to the C-Bus network

• 120V or 277Vac models available

• Dimensions! 8-9 in. (226mm) wide x 3.8 in. (97mm) deep s 12.57 (319mm) tall

Device Router The Powerlink Device Router allows the exchange of data between a Powerlink NF3000G3C controller and C-Bus devices. This device router receives data from C-Bus input devices such as keypads and touchscreens and sends data to the Powerlink system and isa versa. The device router consists of a C-Bus 8M enclosure containing a C-Bus PC Interface and a C-Bus Power Supply (120Vac or 277Vac). Communication between the device router and the NF3000G3C controller is made with the included 50-foot serial cable.

• Surface-mount NEMA 1 enclosure, with cover

• Unit, Unit/Comms, and C-Bus LEDs indicate the status of data transmission and power to the unit and the network

• System network clock for synchronizing communications data

• Network power source, supplying up to 350 mA

• 120Vac or 277Vac models available

• Dimensions: 8.9 in. (226mm) wide x 3.8 in. (97mm) deep s 12.57 in. (319mm) tall

Table 5.2: Powerlink Device Routers.

Description

12W Device Router 277V Device Router

• Required for interface to ClIpsal units.

• DE-8 Discount.

Table 5.3: Powerlink Device Power Supplies.

Description Catalog No. $ Price

Single Sul)* 120V 900,00 Dual Suppy 120V 1650.00 Single Sup* V7TV 900.00 Dual Supply 277V -

1650.00 Filler Plate 27.00

• Extends C-Bus power to Clipsat devices.

• DE-8 Discount.

Powerlink Network Accessories

Catalog No.

H, C co

$ Price

1832.00 163203

Table 5.4: Powerlink Network Accessories ['redeem

R9^49/48.5 Conveler

Table 5.5: Powerlink Remote Modem Support.

Description Catalog No. $ Price

Modem Kit :for ea Controllers) 87600

• Requires 2000 and 3000 controller and ether Analog or Ethernet modem connection to each master panel.

Catalog No. Price 526.50

Z W Ito

Stu

Zo Or

Zr.

1-4

1.30 •11.

to

02009 Schneider Electric All Rights Reserved DE-8 DE-8A Vchedge 5-29

Sc Ele

Weider (" ctric

C-Bus TM Lighting Control

Class 1250 www.schneider.leCtriC.us

LOUN GE

co

❑DINING

PLAY CD

RELAX

tiO{T

Saturn Style Keypad

0a.2222.222-2.

DESKS

LIBBY

LOUNGE

Neo Style Keypad

DLT Keypads

SaturnTM Dynamic Labeling Technologym, (DLT) Keypads combine a programmable keypad button, and easily customized labels on a backlit LCD screen that eliminates the need for custom labels. By virtue of the variety of button configurations available, one compact DLT keypad can take the place of many single-operation switches, ON/OFF toggles, dimmers, and timers. The five keypad buttons incorporate blue LEDs which complements the keypad's sleek lines while showing the status of controlled devices.

• Button configurations include multi-point switching and dimming, master ON/OFF switching, and scene settings

• Keypads have five physical buttons—tour control buttons, and one stroll/page button—combined with two screens of labels, for a total of eight control buttons and two scroll/page buttons

• Scene control includes up to forty addresses per keypad. Larger scenes are possible by sharing memory among multiple keypads.

• Independent timers available for each button

• Button LEDs can be used as locator lights in the dark

• 64 x 128 pixel LCD screen with a white backlight

• Editable LCD labels, available for each button or control group, can display text, symbols, and graphics.

• Dynamic graphic displays, such as bar graphs, can be enabled or disabled

• Bitmaps can be downloaded tor each group address or scene

• Low-profile design, wall mounted without external fittings

Table 5.1: Saturn and Neo Style DLT Keypads Catalog No. Catalog Description $ Price

Saturn DLT White 968.00 Saturn DLT Bleck 98890 Saturn DLT Cream 966.00 Saturn DLT Mocha 966.00 Neo DLT Brushed Aluminum 898.00 Neo Da While 898.00 Neo DLT Black 898.00 No0 DLT Soft Grey 898.00 Neo DLT Cream 898.110 Neo DLT Dosed Sand 898.00

Table 5.2: DLT Keypad Accessories Catalog No. Catalog Description $ Price

:._°CN Saturn DLT ccaer plate Cream 110.00 -- L , -,. Saturn DLT cover plate. Black 110.00

Satan DLT cover plate Mocha 110.00 Saban DLT COVIIITpLgte, White 110.00

19 Neo DLT cover plate, BrUStied Aluminum and State 12.00 _Lic2.1--. Neo DLT cover plate, Brown 12.00

Neo DLT cover plate. Cream 12.00 F3n, Neo DU cover plate, Black 12.00

Neo DLT cover plate. Soft Gray 12.00 Neo OLT cover plate, Desert Sand 12.00 Neo DLT cover plate, White 12.00

21.

4v)

ON

Fw

Ox

Ou m

Sa uW -it-to e 2009 Schneider Electric All Rights Reserved DE-8 Seed 5-7

C-Bus

Light Level Sensor

Outdoor PIR Sensor

/ a

380° Indoor PIR Sensor

Sensors

Class 1250 Sc Weider Electric www.sohneklaealactric.es Light Level Sensor The C-Bus Light-Level Sensor measures ambient light levels and automatically issues ON, OFF, or ramp commands over a C-Bus network. The light-level sensor can control relays, dimmers, or remotely operated circuit breakers, changing their status according to pre-set ambient lighting targets. The C-Bus light-level sensor-has a dynamic range between 5-150 foot candles, and compensates for noise and rapid light intensity fluctuations.

Outdoor Light Level Sensor C-Bus Outdoor Light-Level Sensor measures…