ATTACH Ed_ATT HNS Cable Toning Request Application Form091018.docx

AT&T Toning Required No Toning Required

CABLE TONING REQUEST APPLICATION

TONING REQUEST NO.

(AT&T Internal Use)

*Highlighted area’s must be filled out.

CO. LICENSE NO.

TELEPHONE NO.

ADDRESS

CITY

STATE

ZIP CODE

( Include Cross Streets/Building numbers)

The Contractor expressly understands, agrees and warrants that:

1) The tone, markings and site locations provided by AT&T HNS are approximations only of the location of the cable or cables. AT&T HNS makes no representation, guarantee or warranty, either expressed or implied, of their accuracy, and that the Contractor shall have the sole responsibility to perform field verification, including probing and hand digging methods. In regards to the matter of a “toned cable depth”, please be advised that AT&T HNS does not normally provide this service due to possible litigation; however, we recognize that even “non-certified” information could provide you with a significant degree of assistance in the design of infrastructures to be constructed. Therefore, AT&T HNS will provide this service only if a notarized approved disclaimer, which relieves AT&T HNS of any and all liabilities for providing this information, is furnished by your firm.

2) The toning marks provided by AT&T HNS, shall be maintained by the Contractor during the project. If the original marking is lost or additional marking is required, the contractor shall submit a new request for toning.

3) The excavation notice for toning is void 90 days after the date signed below. The applicant must reapply for toning if excavation has not been completed within this 90 day period.

4) Excavations with durations longer than 90 days may receive special handling. The permit needs to be renewed with AT&T HNS every 90 days for a record review. A weekly work schedule provided to AT&T HNS may be required.

5) Presence of an AT&T HNS representative to assist in locating the facilities shall not be deemed as any representation, guarantee or warranty by AT&T HNS as to their location. The Contractor shall have the sole responsibility for field verification, including probing and hand digging.

6) The Contractor shall be liable for any and all damages to the cable or cables resulting from any actions taken by the Contractor or any of its Sub-Contractors or Independent Contractors or the employees of any of them. The Contractor shall indemnify and hold AT&T HNS harmless from all claims and demands from injuries to persons or property resulting from or arising out of any actions of the Contractor.

7) The Contractor shall provide AT&T HNS – NMC Phone 808-471-4131, 72 HOURS notification prior to the date each service is required. (Phone number 471-4131 has been updated as of 9/10/18)

8) For questions regarding toning and toning work performed please contact AT&T HNS Outside Plant Engineering at 659-1400.

The Contractor having read and understanding the foregoing, submits this application on this day of_ ____________,__ ___

MONTH YEAR

TELEPHONE NO:

Rev091018 image1.png