Att.1_Exhibit_A-1_-_Specifications.docx

Scope It is the intent of this technical specification to describe the minimum requirements for the installation of a rear door accessible wheelchair lift into a Ford Transit XL, Medium Roof, 15 passengers Van, supplied by the California Department of Corrections and Rehabilitation (CDCR). The converted van shall be capable of safely transporting two wheelchair bound inmates.

All installed components shall be new, unused, current year model and will have all standard equipment shown in the manufacturers printed literature unless a specific and installed option makes the standard equipment unnecessary.

Regulations, Codes, and Standards The following standards, laws, regulations, and codes of the issue in effect on the date of the Invitation for Bid (IFB) form a part of this specification to the extent specified herein. Any referenced document is the current edition, as of the date of the issuance of this specification.

Regulations Americans with Disabilities Act (ADA) American Public Transportation Association (APTA) California Department of Transportation (Caltrans) California Vehicle Code (CVC) Code of Federal Regulations (CFR) Federal Motor Vehicle Safety Standards (FMVSS) U.S. Department of Transportation (U.S. DoT) Standards American Society of Mechanical Engineers (ASME) American Society for Testing and Materials (ASTM) International American National Standards Institute (ANSI) International Organization for Standardization (ISO) Society of Automotive Engineering (SAE) International Technical Requirements General The wheelchair lift shall be new, unused, and current production as specified in the solicitation at the line-item description. Products bid shall meet or exceed the requirements in the solicitation line-item description. The wheelchair lift shall be supplied with all equipment and accessories indicated as standard equipment in the manufacturer’s published literature or website.

The wheelchair lift shall include all necessary equipment, be complete, and ready to use. All parts not specifically mentioned which form part of the complete unit required for functionality shall be provided and shall conform in design, strength, quality of materials, and workmanship to the highest standards of engineering practices.

ACCESSIBILITY

The wheelchair lift shall comply with ADA Standards for Accessible Design, including all requirements of Sections 206.7 (Platform Lift Use) and 410 (Platform Lift Technical Criteria

SAFETY

The wheelchair lift shall comply with FMVSS 49 CFR § 571.403 (Platform Lift Systems) and 49 CFR § 571.404 (Platform Lift Installations)

TYPE

The wheelchair lift shall be the Braun Century Series model #NDCC-2 or Ricon titanium.

STYLE

The wheelchair lift shall be for rear door installation and shall not be folding style.

LOAD CAPACITY

The wheelchair lift shall have a minimum lifting capacity of 800 pounds.

Clear HEIGHT The wheelchair lift shall have a maximum clear height of 58 inches.

Clear PLATFORM WIDTH The wheelchair lift shall have a minimum platform width of 31 inches.

Clear PLATFORM LENGTH The wheelchair lift shall have a minimum platform length of 43 inches.

FLOOR-TO-GROUND TRAVEL

The wheelchair lift shall have a minimum floor-to-ground travel of 40 inches.

Revision History

Kadhim, A Page 1 of 3 3/25/2026 image1.png