Att_2 Specification Response Matrix.xlsx
XLSX spreadsheet 22 KB Posted
- Attached to
- US Navy 8M and 11 M Rigid Inflatable Boat (RIB) and U. S. C. G. Special Purpose Craft Law Enforcement II RFP
- Solicitation number
- N0002421R2205
About this file
This document contains a specification response matrix and federal contract opportunity. The specification response matrix is a template for offerors to provide technical specifications and dimensions for proposed 8m and 11m rigid inflatable boats and special purpose craft law enforcement vessels. It includes requirements for length, beam, deadrise, capacity, speed, fuel capacity, structural design, engine options, and trailer specifications. Offerors must indicate whether their proposed vessels comply with each specification requirement or provide rationale for exceptions.
The related federal contract opportunity is a solicitation to acquire approximately 110 rigid inflatable boats and special purpose craft over five years. The vessels will be built to commercial standards and specifications. Award will be made to a single offeror presenting the lowest price technically acceptable proposal. The procurement is set aside for small businesses and conducted under the Federal Acquisition Regulation for commercial item acquisitions. The procuring agency is the Naval Sea Systems Command of the Department of the Navy.
View the file
Other files
Show all 28
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Att 2 Spec Response Matrix
ATTACHMENT 2
8m AND 11m NSW SURFACE SUPPORT CRAFT (SSC) 11m USCG SPECIAL PURPOSE CRAFT LAW ENFORCEMENT (SPC-LE)
SPECIFICATION RESPONSE MATRIX
NOTES & INSTRUCTIONS:
Offerors to submit Attachment 2 with response for parameters identified in the Specification (See Section J).
1. Where specific parameters or other technical information are required in the Specification (indicated by red text in the Specification), Offerors shall fill in the specific parameters/information for their proposed design for each boat configuration (as applicable) in this attachment and include supporting data in Vol I as directed. At bottom Offerors shall respond with 'Comply' to indicate their design meets all Specification requirements; or 'Comply w/Exceptions' to indicate disagreement with any specific section of the Specification.
2. A response of 'Comply w/Exceptions' shall be accompanied by amplifying notes in the 'Offeror's Notes' section at bottom, providing rationale for any exceptions. Each exception shall list the Specification section, the specific rationale for non-compliance with the section, and a proposed alternative approach. Any proposed alternative approach must meet the minimum requirement of the Specification to the Government's satisfaction. Description of Offeror's alternative approach shall include the detailed approach to achieving the minimum Specification requirement; applicable material specifications, make and model numbers for all parts/components; compliance with any requisite commercial or military standard, or associated “best practice”; and shall include any supporting product performance, test data, or other empirical evidence for the proposed product or service capability where applicable. The Government reserves the right to reject (without discussion) any proposed alternative which is incomplete or fails to meet minimum requirements of the Specification.
3. A response is required for each Specification section identified herein. The Government reserves the right to evaluate incomplete responses as non-compliant with the Specification and unacceptable for Factor 1 (Technical Approach).
Specification Item Specification Parameter Offeror Response 8m Open SSC (See Note 1) Offeror Response 11m Open SSC (See Note 1) Offeror Response 8m Cabin SSC (See Note 1) Offeror Response 11m Cabin SSC (See Note 1) Offeror Response 11m SPC-LE (See Note 1)
| 070-1a | Enter Length Overall (LOA) including collar and appendages: xx.xx feet (ft) | N/A | N/A | N/A | ||||
| 070-1a | Enter Hull Length (including outboard bracket): xx.xx ft [Shall be no less than 24 ft and no greater than 27 ft] | N/A | N/A | N/A | ||||
| 070-1a | Enter Beam Overall (BOA): xx.x ft | |||||||
| [Shall be less than or equal to 10 ft] | N/A | N/A | N/A | |||||
| 070-1a | Enter Chine Beam: xx.x ft [Shall be less than or equal to 8.5 ft] | N/A | N/A | N/A | ||||
| 070-1a | Width on Trailer when Rigged for Transport: xx.x ft [Shall be less than 120 inches] | N/A | N/A | N/A | ||||
| 070-1a | Enter Deadrise at Midships: xx degrees | N/A | N/A | N/A | ||||
| 070-1a | Enter Deadrise at Transom: xx degrees [Shall be 20 degrees or greater] | N/A | N/A | N/A | ||||
| 070-1a | Enter Height, Keel to Fixed Structure: xx.x ft | N/A | N/A | N/A | ||||
| 070-1a | Enter Height, Keel to Moveable Structure: xx.x ft | N/A | N/A | N/A | ||||
| 070-1a | Enter Height on trailer when rigged for transport [Shall be less than 162 inches] xx.x ft | N/A | N/A | N/A | ||||
| 070-1a | Enter Height from waterline to highest point on vessel (with antennas lowered): xx.x ft [Shall not exceed 12 ft.] | N/A | N/A | N/A | ||||
| 070-1a | Enter Longitudinal Center of Gravity (LCG) [forward of transom/keel intersect]: xx.x ft | N/A | N/A | N/A | ||||
| 070-1a | Enter Static Draft at Full Load (hull): xx.x ft | N/A | N/A | N/A | ||||
| 070-1a | Enter Static Draft at Full Load (outboards): xx.x ft [Shall be less than 36 in] | N/A | N/A | N/A | ||||
| 070-1a | Enter Full Load xx,xxx pounds | N/A | N/A | N/A | ||||
| 070-1a | Enter Cruise Speed [Shall be 25+ knots] xx knots (kts) at Full Load in calm water [for Open variants] and xx knots (kts) at Full Load in calm water [for Cabin Variants] | N/A | N/A | N/A | ||||
| 070-1a | Enter Sprint Speed [Shall be 35+ knots] xx knots (kts) at Full Load in calm water [for Open variants] and xx knots (kts) at Full Load in calm water [for Cabin Variants] | N/A | N/A | N/A | ||||
| 070-1a | Enter total installed fuel capacity xxx gallons | N/A | N/A | N/A | ||||
| 070-1b | Enter Length Overall (LOA) including collar and appendages: xx.xx feet (ft) | N/A | N/A | |||||
| 070-1b | Enter Hull Length (including outboard bracket): xx.xx ft [Shall be no less than 33 ft and no greater than 36 ft] | N/A | N/A | |||||
| 070-1b | Enter Beam Overall (BOA): xx.x ft | |||||||
| [Shall be less than or equal to 10 ft] | N/A | N/A | ||||||
| 070-1b | Enter Chine Beam: xx.x ft [Shall be less than or equal to 8.5 ft] | N/A | N/A | |||||
| 070-1b | Width on Trailer when Rigged for Transport: xx.x ft [Shall be less than 120 inches] | N/A | N/A | |||||
| 070-1b | Enter Deadrise at Midships: xx degrees | N/A | N/A | |||||
| 070-1b | Enter Deadrise at Transom: xx degrees [Shall be 20 degrees or greater] | N/A | N/A | |||||
| 070-1b | Enter Height, Keel to Fixed Structure: xx.x ft [for Open SSC variant], xx.x ft [for Cabin SCC Variants], xx.x ft [for SPC-LE Variants] | N/A | N/A | |||||
| 070-1b | Enter Height, Keel to Moveable Structure: xx.x ft [for Open SSC variant], xx.x ft [for Cabin SCC Variants], xx.x ft [for SPC-LE Variants] | N/A | N/A | |||||
| 070-1b | Enter Height on trailer when rigged for transport [Shall be less than 162 inches] xx.x ft [for Open SSC variant], xx.x ft [for Cabin SCC Variants], xx.x ft [for SPC-LE Variants] | N/A | N/A | |||||
| 070-1b | Enter Height from waterline to highest point on vessel (with antennas lowered) [Shall not exceed 12 ft] xx.x ft [for Open SSC variant], xx.x ft [for Cabin SCC Variants], xx.x ft [for SPC-LE Variants] | N/A | N/A | |||||
| 070-1b | Enter LCG xx.x ft forward of transom/keel intersect [for Open SSC variants] xx.x ft forward of transom/keel intersect [for Cabin SSC Variants] xx.x ft forward of transom/keel intersect [for SPC-LE Variants] | N/A | N/A | |||||
| 070-1b | Enter Static Draft at Full Load (hull) x.x ft [for Open SSC variants], x.x ft [for Cabin SSC Variants], x.x ft [for SPC-LE Variants] | N/A | N/A | |||||
| 070-1b | Enter Static Draft at Full Load (outboards) [Shall be less than 36 in] x.x ft [for Open SSC variants], x.x ft [for Cabin SSC Variants], x.x ft [for SPC-LE Variants] | N/A | N/A | |||||
| 070-1b | Enter Full Load xx,xxx pounds | N/A | N/A | |||||
| 070-1b | Enter Cruise Speed [Shall be 25+ knots] xx knots (kts) at Full Load in calm water [for Open SSC Variants], xx knots (kts) at Full Load in calm water [for Cabin SSC Variants] | N/A | N/A | N/A | ||||
| 070-1b | Enter Sprint Speed [Shall be 35+ knots] xx knots (kts) at Full Load in calm water [for Open SSC Variants] and xx knots (kts) at Full Load in calm water [for Cabin SSC Variants] | N/A | N/A | N/A | ||||
| 070-1b | Enter Cruise Speed [Shall be 35+ knots] xx knots (kts) at Full Load in calm water [for SPC-LE Variants only] | N/A | N/A | N/A | N/A | |||
| 070-1b | Enter Sprint Speed [Shall be 45+ knots] xx knots (kts) at Full Load in calm water [for SPC-LE Variants only] | N/A | N/A | N/A | N/A | |||
| 070-1b | Enter Total Installed Fuel Capacity: xxx gallons | N/A | N/A | |||||
| 084-3 | Trailer shall be make and model | |||||||
| 100-1 | General Requirements for Hull Structure - Provide a name and short description of structural methodology. | |||||||
| 166-1 | Provide a description of collar design and identify foam materials | |||||||
| 236-2a | Outboard Engines - Suzuki Model and horsepower | |||||||
| 236-2b | Outboard Engines - Mercury Verado Model and horsepower | N/A | N/A | N/A | N/A | |||
| All | 8m and 11m SSC NSW Specification - Enter "Comply"; or enter "Comply w/Exceptions" AND provide rationale for exceptions in notes below. If “or equal” equipment is proposed, Offeror shall provide documentation demonstrating compliance with Specification Section 042-3. | |||||||
| Offeror's Notes: |
&12RFP N00024-17-R-2217 &10
&P of &N
Example Response
| ATTACHMENT 2 |
| CNIC WORK BOAT X |
| SPECIFICATION RESPONSE MATRIX - EXAMPLE RESPONSE |
See below for partial example responses.
Specification Item Specification Parameter Offeror Response (See Note 1)
| 070-1 | Enter Length Overall (LOA): xx.xx feet (ft) | 40.5 ft |
| 070-1 | Enter Hull Length (Lhull): xx.xx ft | 39.5 ft |
| 070-1 | Enter Beam Overall (BOA): xx.x ft | 16.0 ft |
| 070-1 | Enter Maximum Speed (at x,xxx engine RPM): xx knots (kts) at Full Load in calm water | 9.5 kts at 2,100 rpm |
| 070-2 | Enter list of submitted drawings describing the proposed boat. | 100-123456 Gen'l Arr |
100-123457 Transport (Continue per Sect L)
| 223-1 | Inboard Diesel Engines - Verify speeds and static bollard pull required in Spec can be achieved on proposed boat using specified engines. | Verified |
| All | CNIC Work Boat X Specification - Enter "Comply"; or enter "Comply w/ Exceptions" AND provide rationale for exceptions in notes below. | Comply w/ Exceptions |
| Offeror's Notes: | ||
| 581-1: Exception: Offeror has no local distributor for Fortress anchors and has assessed alternatives in accordance with Specification Section 042-3. Offeror proposes a BrandX Model xxx123 anchor in lieu of a Fortress anchor specified. A catalog sheet for BrandX Model xxx123 is included in Vol I. Offeror has provided BrandX anchors in 300 boats in similar sizes and applications. |
RFP N00024-17-R-2216
File details come from the government source that posted it. Updated .