Att 11 Watercraft Example Project 3.pdf

PDF 135 KB Posted

Attached to
Watercraft Targets IDIQ
Solicitation number
FA282325R0004
Issued by

About this file

This is an example project document outlining technical specifications for one Coastal Patrol Craft required by the 96 RANSS/RNRT Mobile Targets Section at Eglin AFB, Florida. The craft will be used as a watercraft target for testing capabilities.

The required vessel must be in good condition with specific dimensions including length of 292' to 313.2', beam of 36.1' to 38', displacement of 1500t, and draft of 11' to 14.3'. Key requirements include an all-steel construction, center control area with con towers, forward observation deck, rear landing pad, and operational anchor/docking points. The vessel must be delivered with engines, electronics, and gauges intact but not necessarily operational. All hazardous materials must be removed, and LED lighting systems are required for navigation and night anchoring. Delivery is FOB to Eglin AFB within 220 days after receipt of order (ARO), with required documentation including Certificate of Origin, Bill of Lading, technical data package, and vessel pictures for government review prior to award.

View the file

Other files

Show all 12

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

Example Project 3 Watercraft Targets 6 September 2024

1. Introduction The 96 RANSS/RNRT Mobile Targets Section (MTS) is responsible for the daily cradle to grave operations and management of watercraft targets used for testing capabilities at Eglin AFB, Florida.

2. Scope The Contractor shall provide a price quote for one (1) Coastal Patrol Craft in Good Condition complete with engine(s), electronics, gauges and other accessories that are intact but do not need to be operating. If Vendors cannot provide a ship as specified below, prototype or substitute hulls will be considered. Potential sources will be screened against the item specification and required features.

3. Technical Requirements The Contractor shall develop and deliver a price quote for the watercraft specifications as indicated below and shall not deviate from the following descriptions and required features. The requirements are non-negotiable and must meet the below specifications. If for some reason, there is a deviation it must be communicated upfront.

a. Boat Specifications:

i. Description

1. Hull Type: Displacement

2. Length: 292’ to 313.2’ (+- 1’) plus appendages

3. Beam: 36.1’ to 38’

4. Displacement: 1500t

5. Deadrise: 20 to 22 degrees

6. Draft: 11’ – 14.3’

ii. Required Features

1. Entire structure of the vessel is made of steel

2. Center sitting control area with con towers toward rear

3. Forward observation deck above control area

4. Rear deck auxiliary area aft of con tower

5. Rear landing pad

6. All anchor point must be operational

7. All docking point left intact and usable

8. Rudders in a fixed straight position

iii. Environmental Requirements

1. All liquid, fluids and gases must be drained and purged

2. All asbestos, lead, formaldehydes and like materials potentially hazardous mut be abated

iv. Ancillary Features

1. Ladder for water access

v. Electronics Suite Features

1. Leave intact but not required to operate

vi. Lighting Features

1. LED navigation lights (running and anchor)

2. LED Flood Light

3. Appropriately placed lighting to provide low level and high visibility options for night anchoring

4. Deliverable Items The Coastal Patrol Craft IAW paragraph 3. The vessel must have a Certificate of Origin and a Bill of Lading to include Hull/VIN numbers.

5. Data Deliverables Contractor to provide pictures of the vessel in electronic and hardcopy format to be reviewed by the Government prior to award. Pictures may also be uploaded to web site for review by Government as an alternative method for review with prior notice.

Technical data package for vessel shall include basic structural drawings and provided within 220 days ARO.

6. Delivery Instructions

a. Delivery is FOB Eglin AFB, FL.

b. Delivery period for boat and documentation is 220 days ARO.

c. Final inspection of required specifications and features will be performed prior to acceptance at Eglin AFB, FL.

d. Ship to location and instructions will be provided prior to delivery.

File details come from the government source that posted it. Updated .