Atch(1)_Roofing_and_Painting_IDIQ_Contract_Spec_05May2021.pdf

PDF 16 MB Posted May 5, 2021

Attached to: Roofing and Exterior Painting IDIQ Contract at U. S. Marine Corps Air Station Iwakuni, Japan
Solicitation number: N4008421B5500
Issued by: Department of the Navy Naval Facilities Engineering Command

View the file

Other files

File	Type	Posted
Atch(3)_Painting_Schedule_of_Indefinite_Quantity_Work_PC002_A0004.xlsx	XLSX spreadsheet	Jun 30, 2021
21B5500_A0004_Atch(2)_PC002_30Jun2021.pdf	PDF	Jun 30, 2021
Atch(4)_Roofing_Schedule_of_Indefinite_Quantity_Work_PC002_A0004.xlsx	XLSX spreadsheet	Jun 30, 2021
21B5500_A0004_Atch(1)_Pre-Bid_Inquiries.pdf	PDF	Jun 30, 2021
21B5500_A0004.pdf	PDF	Jun 30, 2021
21B5500_A0003.pdf	PDF	Jun 25, 2021
21B5500_A0002_Atch(1)_Pre-Bid_Inquiries.pdf	PDF	Jun 17, 2021
21B5500_A0002.pdf	PDF	Jun 17, 2021
21B5500_A0001_Atch(2)_PC001.pdf	PDF	May 25, 2021
21B5500_A0001_Atch(1)_Government_Response.pdf	PDF	May 25, 2021
21B5500_A0001.pdf	PDF	May 25, 2021
Atch(4)_Roofing_Schedule_of_Indefinite_Quantity_Work.xlsx	XLSX spreadsheet	May 5, 2021
Atch(6)_PreBid_Inquiry_Form.xlsx	XLSX spreadsheet	May 5, 2021
21B5500_SF1442.pdf	PDF	May 5, 2021
Atch(5)_1-Day_Official_Entry-Exit_Request.pdf	PDF	May 5, 2021
Atch(2)_Summary_Schedule_of_Price.xlsx	XLSX spreadsheet	May 5, 2021
Atch(3)_Painting_Schedule_of_Indefinite_Quantity_Work.xlsx	XLSX spreadsheet	May 5, 2021

Show all 17

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

NAVFAC FE

FEAD Iwakuni

CUI//FEDCON

DEPARTMENT OF THE NAVY

NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND

FEAD IWAKUNI

IDIQ CONTRACT, NAVFAC SPECIFICATION

FOR

ROOFING AND EXTERIOR PAINTING IDIQ CONTRACT

FOR VARIOUS PROJECTS

AT THE

U. S. MARINE CORPS AIR STATION, IWAKUNI, JAPAN

DESIGN PREPARED BY:

PROJECT MANAGEMENT AND ENGINEERING BRANCH

FACILITIES ENGINEERING AND AQUISITION DIVISION

FACILITIES DEPARTMENT, MCAS IWAKUNI

SPECIFICATION PREPARED BY:

K. TOKUNAGA (General Sections) N. SHIOTA (General Sections) T. SUYAMA (Architectural Sections) M. TSUKAMOTO (Architectural Sections)

Date: 05/MAY/2021

SPECIFICATION APPROVED BY:

Architectural Branch: ______A. PINEDA__________Date: 05/MAY/2021

For Commander, NAVFAC: ________________________Date: _

05MAY2021

Roofing and Exterior Painting IDIQ Contract for Various Projects

MCAS Iwakuni, Japan

Table of Contents Page 1

TABLE OF CONTENTS

NOTICE TO BIDDERS

ORDER LIMITATION

SCHEDULE OF PRICE

ROOFING SCHEDULE OF INDEFINITE QUANTITY WORK

PAINTING SCHEDULE OF INDEFINITE QUANTITY WORK

ROOFING SUPPLEMENTARY EXPLANATION OF WORK

PAINTING SUPPLEMENTARY EXPLANATION OF WORK

DIVISION 01 - GENERAL REQUIREMENTS

01 11 00 SUMMARY OF WORK

01 14 00 WORK RESTRICTIONS

01 20 00.00 20 PRICE AND PAYMENT PROCEDURES

01 30 00 ADMINISTRATIVE REQUIREMENTS

01 31 23.13 20 ELECTRONIC CONSTRUCTION AND FACILITY SUPPORT CONTACT

MANAGEMENT SYSTEM (eCMS)

01 32 16.00 20 CONSTRUCTION PROGRESS SCHEDULES

01 33 00 SUBMITTAL PROCEDURES

01 35 26 GOVERNMENTAL SAFETY REQUIREMENTS

01 35 26A AIRFIELD SAFETY PRECAUTIONS

01 45 00.10 20 CONSTRUCTION QUALITY CONTROL

01 50 00 TEMPORARY CONSTRUCTION FACILITIES AND CONTROLS

01 57 19 TEMPORARY ENVIRONMENTAL CONTROLS

01 58 00 PROJECT IDENTIFICATION

01 74 19 CONSTRUCTION WASTE MANAGEMENT AND DISPOSAL

01 78 00 CLOSEOUT SUBMITTALS

Table of Contents Page 2

DIVISION 02 - EXISTING CONDITIONS

02 41 00 DEMOLITION

02 82 00 ASBESTOS REMEDIATION

02 82 16.00 20A BULK SAMPLING FOR ASBESTOS ANALYSIS

02 83 13.00 20 LEAD IN CONSTRUCTION

02 83 13.00 20A PAINT CHIP SAMPLING FOR LEAD ANALYSIS

DIVISION 03 – CONCRETE

03 30 00 CAST-IN-PLACE CONCRETE

DIVISION 07 – THERMAL AND MOISTURE PROTECTION

07 14 00 FLUID-APPLIED WATERPROOFING

07 31 13 ASPHALT SHINGLES

07 32 13 ROOF TILES

07 41 13 METAL ROOF PANELS

07 42 13 METAL WALL PANELS

07 52 00 MODIFIED BITUMINOUS MEMBRANE ROOFING

07 60 00 FLASHING AND SHEET METAL

07 92 00 JOINT SEALANT

DIVISION 08 – OPENINGS

08 81 00 GLAZING

DIVISION 09 – FINISHES

09 24 23 CEMENT STUCCO

09 90 00 PAINTS AND COATINGS

DIVISION 10 – SPECIALTIES

10 14 00.10 EXTERIOR SIGNAGE

Table of Contents Page 3

DIVISION 26 – ELECTRICAL

26 00 00.00 20 BASIC ELECTRICAL MATERIALS AND METHODS

DRAWINGS OF ROOFING PROJECT

DRAWINGS OF EXTERIOR PAINTING PROJECT

-- End of Table of Contents --

NOTICE TO BIDDERS PAGE 1

NOTICE TO BIDDERS

1. CONTRACT LINE ITEMS AND CONTRACT SUBLINE ITEMS

a. Bidders/Offerors shall enter unit prices and amounts for contract line item numbers (CLINs), and exhibit line item numbers (ELINs) as indicated in the schedules.

b. In the event that there is a difference between a unit price and the extended total amount, the unit price will be held to be the intended bid/offer and the total of the CLINs, or ELINs will be recomputed accordingly. The CLIN which includes recomputed contract ELINs will also be recomputed to take into account the change in the exhibit line item number (ELIN). If the bidder/offeror provides a total amount for a CLIN, or ELIN but fails to enter the unit price, the total amount divided by the CLIN, or ELIN will be held to be the intended unit price.

2. SUPPLEMENTAL PRICING INFORMATION

a. Bidders/Offerors shall also enter the supplemental pricing information on the Exhibits. The offered price for CLINs in the Schedule must be broken down by the ELINs listed on the Exhibits.

b. The supplemental pricing information that the Bidders/Offerors shall provide is composed of unit price, extended amounts and its total.

c. Include all necessary costs in the Unit Price to accomplish exhibit line item work. The costs shall be composed of direct and indirect labor, material, equipment, tools, overhead, transportation, profits, taxes, insurance, estimates and all other associated costs.

3. INDEFINITE QUANTITY INDIVIDUAL CONTRACT LINE ITEM QUANTITIES

Once the estimated quantities for individual line items shown in the Schedule and any accompanying exhibits have been ordered, additional quantities may be ordered as long as the overall not-to-exceed (NTE) amount of the contract per year is not exceeded and the Contractor agrees by signing the task order.

-- End of Section –

ORDER LIMITATION PAGE 2

ORDER LIMITATION (FAR 52.216-19)

a. Minimum order. When the Government requires supplies or services covered by this contract in an amount of less than ¥ 500,000, the Government is not obligated to purchase, nor is the Contractor obligated to furnish, those supplies or services under the contract.

b. Maximum order. The Contractor is not obligated to honor.

(1) Any order for single item in excess of ¥ 220,000,000.

(2) Any order for a combination of items in excess of ¥ 390,000,000.

(3) A series of orders from the same ordering office within seven working days that together call for quantities exceeding the limitation in subparagraphs (1) or (2) above.

c. Minimum and Maximum Quantities: As referred to in paragraph (b) of FAR

52.216-22, "INDEFINITE QUANTITY" clause, the contract minimum quantity is a total of ¥ 1,000,000 for three years.

-- End of Section --

NAME OF OFFEROR OR CONTRACTOR:

ITEM NO. Q'TY UNIT

CLIN 0001 Ordering Period 1

Roofing Schedule of Indefinity Quantity Work - " A", the summation of the total prices for exhibit line item ELINs A001 through A094 1 LS ¥ Painting Schedule of Indefinity Quantity Work - " A", the summation of the total prices for exhibit line item ELINs A095 through A169 1 LS ¥

Ordering Period 1 Total ¥

Ordering Period 2

Roofing Schedule of Indefinity Quantity Work - " B", the summation of the total prices for exhibit line item ELINs B001 through B094 1 LS ¥ Painting Schedule of Indefinity Quantity Work - " B", the summation of the total prices for exhibit line item ELINs B095 through B169 1 LS ¥

Ordering Period 2 Total ¥

Ordering Period 3

Roofing Schedule of Indefinity Quantity Work - " C", the summation of the total prices for exhibit line item ELINs C001 through C094 1 LS ¥ Painting Schedule of Indefinity Quantity Work - " C", the summation of the total prices for exhibit line item ELINs C095 through C169 1 LS ¥

Ordering Period 3 Total ¥

GRAND TOTAL, NTE AMOUNT (CLIN 0001) ¥

Abbreviations:

CLIN = Contract Line Item Number NTE = Not-to-Exceed LS = Lump Sum

SCHEDULE OF PRICE

(365 calendar days from the completion date of Ordering Period 2 or when the NTE amount is met whichever comes first.)

(365 calendar days from the completion date of Ordering Period 1 or when the NTE amount is met whichever comes first.)

ITEM AMOUNT

(365 calendar days from the date of award or when the Not-to- Exceed (NTE) amount is met whichever comes first.)

SCHEDULE OF PRICE PAGE 3

Roofing and Painting IDIQ

Contract for Various Projects (Roofing)

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

ITEM EST UT UNIT EST AMT

NO QTY PRICE TOTAL

ROOF :

A001 400 SM ￥￥ 0

A002 Remove existing insulation board. 400 SM ￥￥ 0

A003 400 SM ￥￥ 0

A004 Clean up existing built‐up roofing surface by waterblasting. 1,000 SM ￥￥ 0

A005 Clean up existing gutter surface by waterblasting. 200 LM ￥￥ 0

A006 100 SM ￥￥ 0

A007 50 SM ￥￥ 0

A008 Repair existing concrete covering of the slab. 50 LM ￥￥ 0

A009 70 SM ￥￥ 0

A010 350 SM ￥￥ 0

A011 100 SM ￥￥ 0

A012 350 SM ￥￥ 0

A013 100 SM ￥￥ 0

A014 350 SM ￥￥ 0

Repair existing blister of asphalt roofing system.

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing mineral surfaced built‐up roofing. (up to 300SM)

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing mineral surfaced built‐up roofing. (over 300SM)

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing urethane membrane waterproof coating. (up to

300SM)

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing urethane membrane waterproof coating. (over

300SM)

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing concrete slab or concrete covering. (up to 300SM)

ROOFING SCHEDULE OF INDEFINITE QUANTITY WORK ‐ "A"

EXHIBIT A Price for Ordering Period 1

DESCRIPTION

Remove existing mineral surfaced built‐up roofing, various sheet waterproof and urethane waterproof coating.

Remove existing asbestos contained existing mineral surfaced built‐up roofing, various sheet waterproof and urethane waterproof coating.

Cut and remove existing local deteriorated ashalt roofing system and repair them.

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing concrete slab or concrete covering. (over 300SM)

ROOFING AND PAINTING SCHEDULE OF INDEFINITY QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

A015 200 SM ￥￥ 0

A016 400 SM ￥￥ 0

A017 100 SM ￥￥ 0

A018 400 SM ￥￥ 0

A019 100 SM ￥￥ 0

A020 400 SM ￥￥ 0

A021 200 SM ￥￥ 0

A022 100 SM ￥￥ 0

A023 400 SM ￥￥ 0

A024 100 SM ￥￥ 0

A025 400 SM ￥￥ 0

A026 100 SM ￥￥ 0

A027 400 SM ￥￥ 0

A028 50 SM ￥￥ 0

Provide new polymer modified bitumen roofing system on concrete slab or concrete cover. (up to 300SM)

Provide new polymer modified bitumen roofing system on concrete slab or concrete cover. (over 300SM)

Provide new polymer modified bitumen roofing system on existing riser surface.

Provide new urethane membrane waterproof coating system on existing mineral surfaced built‐up roofing. (up to 300SM)

Provide new urethane membrane waterproof coating system on existing mineral surfaced built‐up roofing. (over

300SM)

Provide new urethane membrane waterproof coating system on existing urethane membrane waterproof coating (up to 300SM).

Provide new polymer modified bitumen roofing system on existing mineral surfaced built‐up roofing. (up to 300SM)

Provide new polymer modified bitumen roofing system on existing mineral surfaced built‐up roofing. (over 300SM)

Provide new polymer modified bitumen roofing system on existing urethane membrane waterproof coating. (up to

300SM)

Provide new polymer modified bitumen roofing system on existing urethane membrane waterproof coating. (over

300SM)

Provide new urethane membrane waterproof coating system on existing urethane membrane waterproof coating (over 300SM).

Provide new urethane membrane waterproof coating system on existing concrete slab or concrete cover (up to

300SM).

Provide new urethane membrane waterproof coating system on existing concrete surface (over 300SM).

Provide new urethane membrane waterproof coating system on existing riser surface.

ROOFING AND PAINTING SCHEDULE OF INDEFINITY QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

A029 50 SM ￥￥ 0

A030 20 SM ￥￥ 0

A031 100 SM ￥￥ 0

A032 100 SM ￥￥ 0

A033 250 SM ￥￥ 0

A034 1,000 SM ￥￥ 0

A035 10 EA ￥￥ 0

A036 100 SM ￥￥ 0

A037 50 LM ￥￥ 0

A038 50 LM ￥￥ 0

A039 50 SM ￥￥ 0

A040 30 SM ￥￥ 0

A041 30 LM ￥￥ 0

A042 50 SM ￥￥ 0

A043 50 SM ￥￥ 0

A044 70 SM ￥￥ 0

Remove existing asphalt shingle roofing system and provide new asphalt shingle roofing system.

Remove existing asbestos contained asphalt shingle roofing & asphalt roofing felt and provide new asphalt shingle roofing & asphalt roofing felt.

Apply heat resistant coating on existing mineral surfaced built‐up roofing or urethane membrane waterproof coating surface (up to 300SM).

Apply heat resistant coating on existing mineral surfaced built‐up roofing or urethane membrane waterproof coating surface (over 300SM).

Provide new polymer modified bitumen roofing system on steel surface of vent pipe.

Remove existing roof tile & asphalt roofing felt and provide new structural plywood, asphalt roofing felt and roof tile on existing sheathing roof board.

Provide new urethane membrane waterproof coating system on existing & new concrete structure and foundation surface.

Provide new mineral surfaced built‐up roofing for maintenance.

Remove existing sheet roofing and provide new synthetic polymer roofing system.

Remove existing sheet roofing and provide new synthetic polymer roofing system with new heat resistant rigid insulation board.

Remove existing fascia & gable wood board and provide new wood fascia & gable board.

Provide new 0.6 thk precoated galvanized metal sheet on the existing fascia & gable board.

Remove existing metal roof and provide new precoated galvanized metal roof.

Provide new precoated galvanized metal roof on existing metal roof.

Remove existing metal roof fascia & gable and provide new precoated galvanized metal fascia & gable.

Remove existing slate roofing system and provide new slate roofing system.

ROOFING AND PAINTING SCHEDULE OF INDEFINITY QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

A045 100 LM ￥￥ 0

A046 10 EA ￥￥ 0

A047 5 EA ￥￥ 0

COPING :

A048 200 LM ￥￥ 0

A049 200 LM ￥￥ 0

A050 200 LM ￥￥ 0

FLASHING :

A051 100 LM ￥￥ 0

A052 100 LM ￥￥ 0

A053 100 LM ￥￥ 0

A054 50 LM ￥￥ 0

DRAIN :

A055 20 EA ￥￥ 0

A056 10 EA ￥￥ 0

Remove existing expansion joint filler & sealant and provide new.

Provide new stainless air ventilator pipe.

Remove existing cement mortar cover and/or various sheet waterproof for existing vent pipe and provide new polymer modified bitumen roofing system around existing vent pipe with stainless tie band.

Remove existing aluminum coping and provide new aluminum coping.

Remove existing horizontal roof drain strainer with clamping base and provide new copper roof drain and aluminum die‐cast strainer.

Remove existing horizontal roof drain strainer with clamping base temporarily. Clean/repaint existing roof drain, strainer and clamping base and reinstall them.

Remove existing aluminum coping temporarily and reinstall existing aluminum coping.

Remove existing aluminum expansion cover and provide new aluminum expantion cover.

Remove existing metal strap with sealant and provide new aluminum strap with sealant.

Remove existing aluminum strap or flashing with sealant and provide new aluminum frashing with sealant.

Remove existing metal flashing and provide new precoated galvanized frashing of roof edge.

Remove existing metal flashing and provide new aluminum or stainless steel flashing of roof edge.

ROOFING AND PAINTING SCHEDULE OF INDEFINITY QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

A057 20 EA ￥￥ 0

A058 10 EA ￥￥ 0

A059 20 LM ￥￥ 0

A060 20 LM ￥￥ 0

A061 20 LM ￥￥ 0

A062 5 EA ￥￥ 0

A063 20 LM ￥￥ 0

A064 3 CM ￥￥ 0

A065 5 SM ￥￥ 0

A066 3 EA ￥￥ 0

A067 3 EA ￥￥ 0

A068 2 EA ￥￥ 0

A069 1 EA ￥￥ 0

Remove existing vertical roof drain strainer with clamping base and provide new copper roof drain and aluminum die‐ cast strainer.

Remove existing vertical roof drain strainer with clamping base temporarily. and clean/repaint existing roof drain, strainer and clamping base and reinstall them.

GUTTER AND DOWNSPOUT :

Provide new urethane membrane waterproof coating system on existing cement mortar surface of roof gutter.

(up to W=200)

Remove existing cement mortar and provide new waterproof cement mortar for existing concrete foundation.

Provide new raised concrete foundation.

(300x300~400x400x200H)

Provide new raised concrete foundation.

(400x400~600x600x300H)

Provide new raised concrete foundation. (over

600x600x300H)

Remove temporarily and reinstall existing mechanical equipment (various capacity A/C outside unit) and concrete block base. Replace existing rubber sheet and anti‐vibration rubber with new.

Provide new urethane membrane waterproof coating system on existing cement mortar surface of roof gutter.

(W=200~400)

Provide new urethane membrane waterproof coating system on existing cement mortar surface of roof gutter.

(over W=400)

Remove existing stainless mesh strainer in the gutter and provide new stainless mesh strainer.

Remove exisitng rain gutter & gurret hanger and provide new PVC gutter & stainless gutter hanger.

STEEL SUPPORT & FOUNDATION FOR MECH AND ELEC EQUIPMENT & PIPING :

Remove existing concrete foundation.

ROOFING AND PAINTING SCHEDULE OF INDEFINITY QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

A070 10 EA ￥￥ 0

A071 10 EA ￥￥ 0

A072 10 EA ￥￥ 0

A073 10 EA ￥￥ 0

A074 10 EA ￥￥ 0

A075 10 EA ￥￥ 0

A076 5 EA ￥￥ 0

A077 5 EA ￥￥ 0

A078 20 LM ￥￥ 0

A079 20 LM ￥￥ 0

A080 500 SM ￥￥ 0

Remove existing electrical conductors and support materials for lightning protection and provide new ones to match existing.

Remove existing steel leg with concrete base and provide new steel leg support with isolation rubber sheet.

PAINTING :

Paint/Repaint exposed surface of new existing steel & wood surfaces.

Repaint exposed surface of existing lead based paint contained steel surfaces.

TEMPORARY WORK :

Erect and dismantle scaffolding.

Cut and weld existing steel leg (up to 40x40 angle or up to

40x75 channel) of steel pipe support for mechanical pipe lines (including associated works). Replace existing isolation rubber sheet with new.

Cut and weld existing steel leg (up to 75x75 angle or up to

65x125 channel) of steel pipe support for mechanical pipe lines (including associated works). Replace existing isolation rubber sheet with new.

Cut and weld existing steel leg (over 75x75 angle or up to

65x125 channel) of steel pipe support for mechanical pipe lines (including associated works). Replace existing isolation rubber sheet with new.

Cut and weld existing steel leg (up to 40x40 angle or up to

40x75 channel) of steel pipe support for mechanical pipe lines (including associated works). Replace existing concrete base and isolation rubber sheet with new.

Cut and weld existing steel leg (up to 75x75 angle or up to

65x125 channel) of steel pipe support for mechanical pipe lines (including associated works). Replace existing existing concrete base and isolation rubber sheet with new.

Cut and weld existing steel leg (over 75x75 angle or over

65x125 channel) of steel pipe support for mechanical pipe lines (including associated works). Replace existing existing concrete base and isolation rubber sheet with new.

ROOFING AND PAINTING SCHEDULE OF INDEFINITY QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

ACM SAMPLING:

A081 1 EA ￥￥ 0

A082 1 EA ￥￥ 0

LBP SAMPLING:

A083 1 EA ￥￥ 0

A084 1 EA ￥￥ 0

A085 400 SM ￥￥ 0

A086 10 EA ￥￥ 0

A087 PCM air sampling and monitoring for asbestos/lead control 4 EA ￥￥ 0

A088 TEM air sampling and monitoring for asbestos/lead control. 4 EA ￥￥ 0

A089 Change room for asbestos/lead control area. 2 EA ￥￥ 0

A090 Disposal of ACM/LBP. 5 CM ￥￥ 0

MISCELLANEOUS

A091 4 EA ￥￥ 0

A092 4 EA ￥￥ 0

A093 3 EA ￥￥ 0

A094 1 LS ￥￥ 10,000,000

(Not‐to‐exceed)

TOTAL (A001 through A094) Not‐To‐Exceed ￥

Air, wipe and/or soil sampling and monitoring for asbestos/lead control area.

Asbestos sampling of existing roofing material.

Asbestos sampling of existing roofing material and request sampling analysis.

Lead based paint sampling of existing steel surface of roof.

Lead based paint sampling of existing steel surface of roof and request sampling analysis.

ACM/LBP ABATEMENT:

Temporary enclosure for asbestos/lead control area.

Other related miscellaneous work (must be negotiated at time of order).

Replace existing acrylic skylight with new. (600x600)

Replace existing acrylic skylight with new. (900x900)

Replace existing acrylic skylight with new. (1300x1300)

ROOFING AND PAINTING SCHEDULE OF INDEFINITY QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

Abbreviations:

SM = Square Meter, LM = Linear Meter, CM Cubic Meter, EA = Each, LS = Lump Sum, ACM = Asbestos Containing Material, LBP = Lead Based Paint

W=width, H=height

ROOFING AND PAINTING SCHEDULE OF INDEFINITY QUANTITY WORK

Roofing and Exterior Painting IDIQ

Contract for Various Projects (Painting)

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

ITEM EST UT UNIT EST AMT

NO QTY PRICE TOTAL

A095 15,000 SM ￥￥ 0

A096 Prepare Lead‐free surfaces with SSPCW type 3. 2,000 SM ￥￥ 0

A097 2,500 SM ￥￥ 0

A098 200 SM ￥￥ 0

A099 Repaint existing wooden siding and board surfaces. 500 SM ￥￥ 0

A100 500 LM ￥￥ 0

A101 200 SM ￥￥ 0

A102 150 SM ￥￥ 0

A103 300 SM ￥￥ 0

A104 Repaint existing aluminum panel surfaces. 500 SM ￥￥ 0

A105 250 LM ￥￥ 0

A106 150 LM ￥￥ 0

A107 200 LM ￥￥ 0

A108 150 LM ￥￥ 0

A109 200 LM ￥￥ 0

A110 150 LM ￥￥ 0

Repaint existing steel and galvanized steel pipe surfaces, up to 50 mm outside diameter with polyurethane type coating.

Repaint existing steel and galvanized steel pipe surfaces, up to 150 mm outside diameter.

Repaint existing steel and galvanized steel pipe surfaces, up to 150 mm outside diameter with polyurethane type coating.

PAINTING SCHEDULE OF INDEFINITE QUANTITY WORK ‐ "A"

Repaint existing wooden beams and columns after surface preparation.

Repaint existing steel and galvanized steel framing/ box/ casing/ door/ window surfaces.

Repaint existing steel and galvanized steel siding/ roof/ wall surfaces. 300SM >

DESCRIPTION

Prepare Lead‐free surfaces with water cleaning.

Repaint existing steel and galvanized steel siding/ roof/ wall surfaces. 300SM <

EXHIBIT A Price for Ordering Period 1

Repaint existing steel and galvanized steel framing/ box/ casing/ door/ window surfaces with polyurethane type coating.

Repaint existing steel and galvanized steel pipe surfaces, up to 300 mm outside diameter with polyurethane type coating.

Repaint existing steel and galvanized steel pipe surfaces, up to 50 mm outside diameter.

Repaint existing steel and galvanized steel pipe surfaces, up to 300 mm outside diameter.

Repaint existing wooden framing/ box/ casing/ base board/ door/ window surfaces.

ROOFING AND PAINTING SCHDULE OF INDEFINITE QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

A111 100 LM ￥￥ 0

A112 50 LM ￥￥ 0

A113 350 LM ￥￥ 0

A114 2,000 SM ￥￥ 0

A115 250 SM ￥￥ 0

A116 2,000 SM ￥￥ 0

A117 250 SM ￥￥ 0

A118 2,000 SM ￥￥ 0

A119 250 SM ￥￥ 0

A120 Repaint existing building numbers and unit number text. 25 EA ￥￥ 0

A121 Repaint letters, unit: continuous letters (one word)/ EA. 100 EA ￥￥ 0

A122 Repaint existing ACB/Cement board surfaces. 50 SM ￥￥ 0

A123 Repaint existing non‐slip coating. 400 SM ￥￥ 0

A124 Repaint existing built‐up roofing. 500 SM ￥￥ 0

A125 Provide rubber type multi‐layer coating system. 300 SM ￥￥ 0

A126 50 SM ￥￥ 0

A127 50 SM ￥￥ 0

A128 Repair spalling. 50 SM ￥￥ 0

A129 Repair crack with U‐cut. 1,000 LM ￥￥ 0

A130 Replace existing non‐ACB with new. 250 SM ￥￥ 0

A131 Replace existing metal flashing with new. 500 LM ￥￥ 0

Repaint existing concrete, concrete masonary unit(CMU), and cement mortar surfaces. 300SM >

Repaint existing concrete, concrete masonary unit(CMU), and cement mortar surfaces. 300SM <

Repaint existing steel and galvanized steel pipe surfaces, up to 600 mm outside diameter.

Repaint existing steel and galvanized steel pipe surfaces, over 600 mm outside diameter with polyurethane type coating.

Repaint existing PVC gutter/ downspout surfaces after surface preparation.

Remove existing cement mortar, and provide waterproof cement mortar.

Repaint existing multi‐layer coating surfaces with rubber type top coating. 300SM <

Repaint existing multi‐layer coating surfaces with top coating. 300SM >

Repaint existing multi‐layer coating surfaces with top coating. 300SM <

Provide waterproof urethane type floor coating on concrete and cement mortar surfaces.

Repaint existing multi‐layer coating surfaces with rubber type top coating. 300SM >

ROOFING AND PAINTING SCHDULE OF INDEFINITE QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

A132 500 SM ￥￥ 0

A133 Replace existing plastic vent cover with aluminum air vent. 20 EA ￥￥ 0

A134 Provide new building number sign. 20 EA ￥￥ 0

A135 Provide new building identification signs (H=610). 100 EA ￥￥ 0

A136 Provide new building identification signs (H=457). 100 EA ￥￥ 0

A137 Provide new building identification signs (H=305). 100 EA ￥￥ 0

A138 Provide illuminated signs with Electrical work. 30 EA ￥￥ 0

A139 Remove existing building signs. 50 EA ￥￥ 0

A140 1,500 LM ￥￥ 0

A141 Replace existing joint sealants with new. 1,000 LM ￥￥ 0

A142 10 CM ￥￥ 0

A143 Replace damaged wooden column and beams. 2 CM ￥￥ 0

A144 Replace PVC gutter/ downspout with new. 150 LM ￥￥ 0

A145 Replace damaged polycarbonate roofing. 10 EA ￥￥ 0

A146 20 SM ￥￥ 0

A147 20 EA ￥￥ 0

A148 100 EA ￥￥ 0

A149 Replace existing ACB with new non‐ACB. 200 SM ￥￥ 0

A150 20 EA ￥￥ 0

A151 Lead‐containing surface preparation with SSPCW type 3. 200 SM ￥￥ 0

A152 Lead‐containing surface preparation with solvent cleaning. 200 SM ￥￥ 0

A153 400 SM ￥￥ 0

A154 Temporary enclosure for lead/ asbestos control area. 800 SM ￥￥ 0

A155 25 EA ￥￥ 0

A156 PCM air sampling and monitoring for asbestos control. 25 EA ￥￥ 0

A157 TEM air sampling and monitoring for asbestos control. 25 EA ￥￥ 0

Air, wipe and/or soil sampling and monitoring for lead control area.

Asbestos‐containing surface preparation with solvent cleaning.

Patch repair hole of ACB with galvanized steel sheet/FRP, Unit: Up to 0.50 SM hole/EA.

Patch repair hole of steel and galvanized steel with galvanized steel sheet, Unit: up to 0.05 SM hole/EA.

Replace existing acrylic lighting fixture covers with new.

Replace existing glass pane in door or window with new.

Replace existing wooden framing/ casing/ trim/ baseboard with new.

Replace existing sealants for windows/ doors with new.

Replace existing galvanized steel sheet/ FRP with new.

ROOFING AND PAINTING SCHDULE OF INDEFINITE QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

A158 Change room for lead/ asbestos control area. 10 EA ￥￥ 0

A159 Disposal of LBP/ACM. 5 CM ￥￥ 0

A160 Asbestos sampling of existing material. 10 EA ￥￥ 0

A161 10 EA ￥￥ 0

A162 10 EA ￥￥ 0

A163 10 EA ￥￥ 0

A164 Provide gondola lift. 10 EA ￥￥ 0

A165 Provide scaffolding. 9,000 SM ￥￥ 0

A166 Provide safety baricade and safety sign. 2,000 LM ￥￥ 0

A167 50 EA ￥￥ 0

A168 50 EA ￥￥ 0

A169 1 LS ￥￥ 10,000,000

(Not‐to‐exceed)

TOTAL (A095 through A169) Not‐To‐Exceed ￥

Abbreviations:

Other related miscellaneous work (must be negotiated at time of order).

EST AMT = Estimated Amount, EST QTY = Estimated

Quantity, SM = Square Meter, LM = Linear Meter, CM

Cubic Meter, EA = Each, LS = Lump Sum, ACB = Asbestos

Cement Board, PCM = Phase Contrast Microscopy, TEM =

Transmission Electron Microscopy, LBP = Lead Based Paint, ACM = Asbestos Contain Material, H = Hight, W = Width, SSPCW = Standard Specifications for Public Construction

Work

Asbestos sampling of existing material and request sampling analysis.

Lead based paint sampling of existing steel surfaces of material.

Lead based paint sampling of existing steel surfaces of material and request sampling analysis.

Remove and reinstall pigeon net, Unit: Up to 16 SM of opening size/EA.

Remove and reinstall window guard, Unit: Up to 2 SM of guard size/EA.

ROOFING AND PAINTING SCHDULE OF INDEFINITE QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

ITEM EST UT UNIT EST AMT

NO QTY PRICE TOTAL

ROOF :

B001 400 SM ￥￥ 0

B002 Remove existing insulation board. 400 SM ￥￥ 0

B003 400 SM ￥￥ 0

B004 Clean up existing built‐up roofing surface by waterblasting. 1,000 SM ￥￥ 0

B005 Clean up existing gutter surface by waterblasting. 200 LM ￥￥ 0

B006 100 SM ￥￥ 0

B007 50 SM ￥￥ 0

B008 Repair existing concrete covering of the slab. 50 LM ￥￥ 0

B009 70 SM ￥￥ 0

B010 350 SM ￥￥ 0

B011 100 SM ￥￥ 0

B012 350 SM ￥￥ 0

B013 100 SM ￥￥ 0

B014 350 SM ￥￥ 0

Repair existing blister of asphalt roofing system.

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing mineral surfaced built‐up roofing. (up to 300SM)

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing mineral surfaced built‐up roofing. (over 300SM)

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing urethane membrane waterproof coating. (up to

300SM)

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing urethane membrane waterproof coating. (over

300SM)

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing concrete slab or concrete covering. (up to 300SM)

ROOFING SCHEDULE OF INDEFINITE QUANTITY WORK ‐ "B"

EXHIBIT B Price for Ordering Period 2

DESCRIPTION

Remove existing mineral surfaced built‐up roofing, various sheet waterproof and urethane waterproof coating.

Remove existing asbestos contained existing mineral surfaced built‐up roofing, various sheet waterproof and urethane waterproof coating.

Cut and remove existing local deteriorated ashalt roofing system and repair them.

Provide new polymer modified bitumen roofing system with new heat resistant rigid urethane insulation board on existing concrete slab or concrete covering. (over 300SM)

ROOFING AND PAINTING SCHEDULE OF INDEFINITE QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

B015 200 SM ￥￥ 0

B016 400 SM ￥￥ 0

B017 100 SM ￥￥ 0

B018 400 SM ￥￥ 0

B019 100 SM ￥￥ 0

B020 400 SM ￥￥ 0

B021 200 SM ￥￥ 0

B022 100 SM ￥￥ 0

B023 400 SM ￥￥ 0

B024 100 SM ￥￥ 0

B025 400 SM ￥￥ 0

B026 100 SM ￥￥ 0

B027 400 SM ￥￥ 0

B028 50 SM ￥￥ 0

Provide new polymer modified bitumen roofing system on concrete slab or concrete cover. (up to 300SM)

Provide new polymer modified bitumen roofing system on concrete slab or concrete cover. (over 300SM)

Provide new polymer modified bitumen roofing system on existing riser surface.

Provide new urethane membrane waterproof coating system on existing mineral surfaced built‐up roofing. (up to 300SM)

Provide new urethane membrane waterproof coating system on existing mineral surfaced built‐up roofing. (over

300SM)

Provide new urethane membrane waterproof coating system on existing urethane membrane waterproof coating (up to 300SM).

Provide new polymer modified bitumen roofing system on existing mineral surfaced built‐up roofing. (up to 300SM)

Provide new polymer modified bitumen roofing system on existing mineral surfaced built‐up roofing. (over 300SM)

Provide new polymer modified bitumen roofing system on existing urethane membrane waterproof coating. (up to

300SM)

Provide new polymer modified bitumen roofing system on existing urethane membrane waterproof coating. (over

300SM)

Provide new urethane membrane waterproof coating system on existing urethane membrane waterproof coating (over 300SM).

Provide new urethane membrane waterproof coating system on existing concrete slab or concrete cover (up to

300SM).

Provide new urethane membrane waterproof coating system on existing concrete surface (over 300SM).

Provide new urethane membrane waterproof coating system on existing riser surface.

ROOFING AND PAINTING SCHEDULE OF INDEFINITE QUANTITY WORK

ROOFING AND PAINTING SCHEDULE OF INDEFINITE

QUANTITY WORK

B029 50 SM ￥￥ 0

B030 20 SM ￥￥ 0

B031 100 SM ￥￥ 0

B032 100 SM ￥￥ 0

B033 250 SM ￥￥ 0

B034 1,000 SM ￥￥ 0

B035 10 EA ￥￥ 0

B036 100 SM ￥￥ 0

B037 50 LM ￥￥ 0

B038 50 LM ￥￥ 0

B039 50 SM ￥￥ 0

B040 30 SM ￥￥ 0

B041 30 LM ￥￥ 0

B042 50 SM ￥￥ 0

B043 50 SM ￥￥ 0

B044 70 SM ￥￥ 0