ASDP_DI_PSSS_81535B.pdf

PDF 187 KB Posted

Attached to
Repair: Circuit Card Assembly Federal contract opportunity
Solicitation number
FA811724R0024
Issued by
Department of the Air Force Materiel Command Air Force Sustainment Center

About this file

This document is a Data Item Description (DID) for an Acquisition and Sustainment Data Package (ASDP) Deficiency Report (DR). The ASDP DR provides a format and content requirements for contractors to report deficiencies on government-furnished material in acquisition or repair contracts. The report is used by the government to identify necessary corrective actions. Key details include:

The ASDP DR must be in a text-searchable format with a completed Data Objects/Attributes and Associated Metadata (DOAM) listing in Microsoft Excel. The report must include information such as the deficiency description, date discovered, part numbers, manufacturer details, contract numbers, and the current disposition of the deficient item. This DID supersedes a previous version and is applicable when contractors are responsible for maintaining custodial records for government property being repaired. It interrelates with another DID for ASDP Material Improvement Project reports.

View the file

Other files for this federal contract opportunity

Other files attached to Repair: Circuit Card Assembly, newest first.
File Type Posted
Surge_DI_MGMT_80969.pdf PDF
3927468_GFP.pdf PDF
FA8117-24-R-0024_RFP.pdf PDF
3927471_PKGRQMT_REPORT.pdf PDF
CAV_DI_MGMT_81838.pdf PDF
CDRL1_REPORT.pdf PDF
BOM_DI_PSSS_81656B.pdf PDF
GFP_DI_MGMT_80441D.pdf PDF
CDM_DI_PSSS_81995A.pdf PDF
3927470_TRNSPDATA_REPORT.pdf PDF
ECP_DI_SESS_80639E.pdf PDF
Counterfeit_DI_MISC_81832.pdf PDF
Show all 12

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DATA ITEM DESCRIPTION

Title: ACQUISITION AND SUSTAINMENT DATA PACKAGE (ASDP) DEFICIENCY REPORT

(DR)

Number: DI-PSSS-81535B Approved Date: 20220715 AMSC Number: F10333 Limitation: N/A DTIC Applicable: No GIDEP Applicable: No Preparing Activity: 11 (AFLCMC/EZSC) Project Number: PSSS-2022-005 Applicable Forms: N/A

Use/Relationship: The Acquisition and Sustainment Data Package (ASDP) Deficiency Report (DR) provides complete and accurate deficiency identification on government furnished material (GFM) in acquisition or repair contracts by contractors to the Government. This information is used by the Government to identify necessary corrective action in accordance with T.O. 00-35D-54, USAF Deficiency Reporting, Investigation, and Resolution (DRI&R).

(Copies of this document are available online at https://www.tinker.af.mil/Resources/Technical- Orders/.)

a. This Data Item Description (DID) contains the format, content, and intended use information for the data deliverable resulting from the work task described in the solicitation.

b. This DID is applicable when contractors are responsible for maintaining custodial records for government property being repaired.

c. This DID interrelates with DI-MGMT-80258, Acquisition and Sustainment Data Package (ASDP) Material Improvement Project (MIP) Report.

(Copies of this document are available online at https://quicksearch.dla.mil.)

d. This DID supersedes DI-PSSS-81535A.

Requirements:

1. Reference documents. The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract.

2. Format. The ASDP Deficiency Report shall be in a text searchable format. The Data Objects/Attributes and Associated Metadata (DOAM) listing shall be in Microsoft Excel spreadsheet format in accordance with the template provided in the DOAM Specification attached to the contract. All data shall be in the English language.

3. Content. The Deficiency Report content shall be as described in Table I.

3.1 DOAM. The completed Deficiency Report template, provided in the DOAM Specification attached to the contract, shall comply with the format requirements (see 2. above) so that it can be ingestible into a Product Lifecycle Management (PLM) solution to ensure proper tying, tracing, and linking to the lowest component of the end item to which the delivered Deficiency Report Information is applicable. Any field that is not applicable shall be marked “NA.”

Source: http://assist.dla.mil -- Downloaded: 2022-10-06T17:02Z Check the source to verify that this is the current version before use.

https://www.tinker.af.mil/Resources/Technical-Orders/ https://www.tinker.af.mil/Resources/Technical-Orders/ https://quicksearch.dla.mil/

DI-PSSS-81535B

TABLE I. Deficiency Report Content.

1. From: Address of Originating Activity

2. To: Office of Primary Responsibility (OPR) for the equipment. Refer to T.O.

00-35D-54 for guidance on Screening Points.

Subject: First Part as applicable:

a. Category I Deficiency Report (CAT I DR)

b. Category II Deficiency Report (CAT II DR)

c. Report Control Number (RCN): An RCN consists of three parts. The first part will be the DoD Activity Address Code (DoDAAC).

The second part will be the last two digits of the calendar year.

The third part will be a 4-digit sequence number that is locally assigned.

3. Description of Deficiency:

Describe in detail what is wrong, the circumstances prior to the difficulty, probable cause, any action taken, and recommendations. Attach copy of supporting documents. Continue on separate sheet if necessary.

4. Date of Deficiency: Year, month, day deficiency was discovered.

5. National Stock

Number (NSN) NSN and applicable Material Management Aggregation Code (MMAC) of item (see D043 or D086).

6. Nomenclature Noun of item for which report is submitted. Software DRs shall provide nomenclature of programmable hardware.

7. Operating Time at Failure

Hours, cycles, days, miles rounds or others

8. Deficient Item Part Number

Complete Manufacturer part number. If Computer Identification Number (CPIN) is associated with a computer program it shall also be provided.

9a. Manufacturer’s CAGE Code

Unique code assigned to suppliers of government or defense agencies.

9b. Manufacturer/Shipper/ City/State

Complete address of manufacturer or shipper.

10. Quantity Number received, inspected, deficient, and in stock.

11. Serial, lot or batch number Complete item serial number.

12a. Item new, repaired or overhauled

Use one to identify item as appropriate.

12b. Date Manufacturer, Repaired or Overhauled

Year/Month/Day

DI-PSSS-81535B

12c. Last Repair Facility CAGE/DoDAAC/Address

13a. Contract Number Obtain contract number from records service tag, manufacturer/container label, etc. Contract number is critical to processing reports.

13b. Requisition/Document Number

Obtain from tags/labels on item packaging.

13c. Purchase Order Number.

The Purchase Order Number associated with the defective part. This can usually be found on the attached shipping document. This field can also be used to annotate the Delivery Order number (products/supplies) or Task Order number (tasks/services) if known or applicable.

14. Government Furnished Material (GFM)

Yes/No/Unknown

15a. Item Under Warranty Yes/No/Unknown 15b. Warranty Expiration

Date Provide if known.

16. End Item Enter the applicable Equipment Item Code (EIC), Work Unit Code (WUC), or Table of Authorized Material Control Number (TAMCN) for the deficient material.

17. Next Higher Assembly a. NSN – National Stock Number associated with the next higher assembly.

b. NOMENCLATURE – Item name of the next higher assembly.

c. PART NUMBER – Part number assigned to the next higher assembly.

d. SERIAL NUMBER – Serial number from the next higher assembly.

18. End Item a. NSN – National Stock Number associated with the end item.

b. NOMENCLATURE – Name of the end item.

c. TYPE/MODEL – Type or model assigned to the end item configuration.

d. SERIAL NUMBER – Serial number from the end item equipment or system.

19. Current Disposition of Deficient Item

Holding/Disposed or Destroyed/Repaired/Other

20. Location of Deficient Material

Enter the name and location or supply activity that is currently holding the exhibit/deficient material.

End of DI-PSSS-81535B.

File details come from the government source that posted it. Updated .